Access to the benefits of Genelec' DSP and SE DSP monitoring systems is made easier than ever with the AD9200A Analog to Digital converter. The Genelec AD9200A allows using the 7200 Series DSP subwoof... Click To Read More About This Product
Access to the benefits of Genelec' DSP and SE DSP monitoring systems is made easier than ever with the AD9200A Analog to Digital converter. The Genelec AD9200A allows using the 7200 Series DSP subwoofers with analog signal sources, bringing the full potential of Genelec' DSP monitoring systems to all applications.
The Genelec AD9200A converter outputs AES3 format with 24 bit word length and 192 kHz sample rate, providing the same consistent high quality found on our 8200 DSP products. Eight-channel balanced analog input is delivered via a 25-pin DB25 connector wired to the Tascam/ProTools industry standard pinout. Digital output consists of four XLR connections, each carrying two channels of AES/EBU audio. The 19"/1U high chassis is delivered with a separate 12V power supply.
Balanced analog input: 8-channel DB25, Tascam pin-out
Digital audio format: 24-bits, AES/EBU (AES3)
Dynamic range: 110dB (lin)
Input clip level: +21.5dBu
Response flatness: +/-0.025dB typ
Frequency range: 4Hz “ 76kHz
Gain difference between any two channels: +/-0.02dB typ
AES/EBU output: XLR Female
Sample frequency: 192kHz
External power supply type: FW74010/12
Mains voltage: 100-240 VAC, 50-60Hz
Supply voltage: 12 VDC
Power consumption: < 7W
Dimensions (HxWxD): 43 x 483 x 105mm (1-1/16 x 19 x 4-1/8)
Weight: 2kg (4.4lb)
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.