Fender Fest. Deals, special financing and new gear

Galaxy Audio PSER HANDHELD SYSTEM  

Item #: 
1316799069117662773
  • Write a Review

The Galaxy Audio PSE is a UHF diversity receiver with 16 selectable channels. The receiver features a volume control, channel display, and IR Sync. The PSE has an XLR ¼" output and squelch adjustment.... Read More

Overview

The Galaxy Audio PSE is a UHF diversity receiver with 16 selectable channels. The receiver features a volume control, channel display, and IR Sync. The PSE has an XLR ¼" output and squelch adjustment. There is little chance of dropout with a two antenna system, and with 16 selectable frequencies, you can be sure of not confusing your signal with other wireless devices being used on the same stage.

Along with the PSE receiver is the HH52, a hand-held wireless microphone transmitter. It is a good-sounding cardiod dynamic microphone with good feedback rejection and reliable performance. The AA battery feature is a vast improvement over traditional 9 volt power delivery in terms of battery life.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

Features
  • Receiver (PSER)
  • Output Volume Control
  • AF Level Indicator
  • IR Sync
  • Squelch Adjustment
  • XLR and ¼" Outputs
  • Hand Held Microphone (HH52)
  • Dynamic Microphone Element
  • On/Off Switch
  • Gain Control with High/Low RF Power Switch
Specifications
  • Audio Output Level: (+/-30KHz deviation, 1KHz tone) XLR connector (into 600 Ohms load) -12dBV ¼" connector (into 3KOhms load) -18dBV
    Output Impedance: XLR connector 200Ohms ¼" connector 1KOhms
    XLR output: Impedance balanced
    Pin1: Ground (cable shield)
    Pin2: Audio
    Pin3: No Audio
    Sensitivity: -93dBm for 30dB
    Image Rejection: >90dB
    Dimensions: 8.3 x 1.7 x 6.3 in.
    Weight: 31oz.
    Power Requirements: 12-18 V dc at 400mA, supplied by external power supply.
Warranty
MANUFACTURER'S WARRANTY
One year parts and labor warranty on all products, including power supply.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.