The PSE is a UHF diversity receiver with 16 selectable channels. The receiver features a volume control, channel display, and IR Sync. The PSE has an XLR ¼" output and squelch adjustment. Along with t... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The PSE is a UHF diversity receiver with 16 selectable channels. The receiver features a volume control, channel display, and IR Sync. The PSE has an XLR ¼" output and squelch adjustment. Along with the PSE receiver is the MBP52 body pack transmitter and the 52HS headset microphone.
The headset microphone is an ideal solution for anyone who needs hands-free vocal amplification. It is ideal for auctioneers, lecturers, bingo callers, business presenters or singers. The headset terminates in a mini XLR jack that plugs into a belt pack transmitter. The belt pack then transmits the signal to a half-rack space diversity receiver, which in turn feeds your amplifier. There is little chance of dropout with a two antenna system, and with 16 selectable frequencies, you can be sure of not confusing your signal with other wireless devices being used on the same stage.
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
Output Volume Control
AF Level Indicator
Body Pack (MBP52)
2 AA Batteries
3 Position Switch
Low Battery Indicator
Audio Output Level: (+/-30KHz deviation, 1KHz tone) XLR connector (into 600 Ohms load) -12dBV ¼" connector (into 3KOhms load) -18dBV Output Impedance: XLR connector 200Ohms ¼" connector 1KOhms XLR output: Impedance balanced Pin1ï¼Ground (cable shield) Pin2ï¼Audio Pin3ï¼No Audio Sensitivity: -93dBm for 30dB Image Rejection: >90dB Dimensions: 1.7" x 8.3" x 6.3" (44mm H x 212mm W x 160mm D) Weight: 31oz (880 g) Power Requirements: 12-18 V dc at 400mA, supplied by external power supply.
One year parts and labor warranty on all products, including power supply.