The Galaxy Audio PSE/52HS Wireless Microphone System features a UHF diversity receiver with 16 selectable channels, volume control, channel display, and IR Sync. It also has a convenient MBP52 bodypac... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The Galaxy Audio PSE/52HS Wireless Microphone System features a UHF diversity receiver with 16 selectable channels, volume control, channel display, and IR Sync. It also has a convenient MBP52 bodypack transmitter with Mic/0/-10dB 3-position switch and a uni-directional headset. The wireless system gives you 300' of freedom anywhere on stage.
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
Single rack mount included
16 selectable channels
PSER Wireless Receiver
Output volume control
AF level indicator
MBP52 Bodypack Transmitter
2 'AA' batteries
Mic/0/-10dB 3-position switch
Low battery indicator
2.8 oz (80g)
System Frequency Range: 655-679MHz Transmitter Output Level: 10dBm Band: UHF Operating Range: Under Typical Conditions 300' (92m) Note: Actual range depends on RF signal absorption, reflection, and interference Audio Frequency Response: +/-3dB 70Hz-16KHz Total Harmonic Distortion: +/-30KHz deviation 1KHz tone <1% Dynamic Range: >90dB A-weighted Operating Temperature: Range 14F to 122F (-10 C to +50 C) Note: battery characteristics may limit this range
PSER Audio Output Level: (+/-30KHz deviation, 1KHz tone) XLR connector (into 600 Ohms load) -12dBV 1/4" connector (into 3KOhms load) -18dBV Output Impedance: XLR connector 200Ohms " connector 1KOhms XLR output: Impedance balanced Pin1: Ground (cable shield) Pin2: Audio Pin3: No Audio Sensitivity: -93dBm for 30dB Image Rejection: >90dB Dimensions (HxWxD): 1.7" x 8.3" x 6.3", (44mm x 212mm x 160mm) Weight: 31oz (880g) Power Requirements: 12-18 V DC at 400mA, supplied by external power supply
MBP52 Bodypack Transmitter Max Audio Input Level: 0dBV to +10dBV Gain Adjustment Range: 20dB Input Impedance: 5KOhms Dimensions (HxWxD): 3.3" x 2.6" x 1", (85mm H x 65mm W x 24mm D) Weight: 3.0oz (85g) (without batteries) Power requirements: 2 'AA' batteries alkaline or rechargeable batteries Battery life: About 8 hours
AS-HS Sensitivity: -65 ”4dB (0dB=1V/UBR 1KHz) Frequency response: 50 Hz - 18kHz Output impedance: 2KOhms Max. (RL-2.2KOhms) Directionality: Uni-directional Working voltage range: 1 - 10V Standard working voltage: 3V Current consumption: 250UA (Max.) Maximum input sound pressure: 110dB SPL S/N ratio: >38dB
One year parts and labor warranty on all products, including power supply.