Galaxy Audio ECM Lav Wireless System  

Item #: 
1298675869713557000
  • Write a Review

The Galaxy ECM Wireless Head Set System includes the ECMR reciever, MBP52 bodypack transmitter, and 52LV lavalier microphone.
The ECMR Wireless ReceiverThe ECMR Wireless Receiver... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The Galaxy ECM Wireless Head Set System includes the ECMR reciever, MBP52 bodypack transmitter, and 52LV lavalier microphone.

The ECMR Wireless Receiver
The ECMR Wireless Receiver is an economical solution to a great wireless microphone system. The ECMR has 16 selectable channels, IR Sync, Diversity Antennas mounted to the front of the rugged plastic casing.

HH52 / MBP52 Wireless Transmitters
The ECMR can be used and will sync with either the HH52 or MBP52 transmitters. The HH52 has a gain control and an on/off switch. Both transmitters are powered by 2AA batteries. The MBP52 body pack transmitter has a 0/-10/Mic selector switch.

52LV Lavalier Microphone:
The 52LV lapel/lavalier microphone has a unidirectional polar pattern to reduce feedback and a frequency response of 100Hz-16kHz.


ECMR Reciever:
Audio Output Level: (+/-30KHz deviation, 1KHz tone) XLR connector (into 600 ohm load) -12dBV ¼" connector (into 3k ohm load) -18dBV
Output Impedance: XLR connector 200Ohms ¼" connector 1KOhms
XLR output: Impedance balanced
Pin1ï¼Ground (cable shield)
Pin2ï¼Audio
Pin3ï¼No Audio
Sensitivity: -93dBm for 30dB
Image Rejection: >90dB
Dimensions: 1-3/4" x 9-1/4" x 4-3/4"
(44.45mm H x 235mm W x 121mm D)
Weight: .85 lb. (.39kg)
Power Requirements: 13.5 V dc at 300mA, supplied by external power supply.

MBP52 Bodypack Transmitter:
Max audio input level: 0dBV to +10dBV
Gain adjustment range: 20dB
Input impedance: 5k ohm
Dimensions: 3-5/16" x 2-5/8" x 1" (85mm H x 65mm W x 24mm D)
Weight: 3.0oz (85 g) (without batteries)
Power requirements: 2 AA batteries (alkaline or rechargeable)
Battery life: Approx. 8 hours

52LV Lavalier Microphone:
Sensitivity. -64 ± 4dB (0dB=1V/UBR 1KHz)
Frequency response: 100Hz-16kHz
Output impedance: 2k ohm max. (RL-2.2k ohm)
Directionality: Unidirectional
Working voltage range: 1 10V
Standard working voltage: 3V
Current consumption 250uA (Max.)
Maximum input sound pressure: 110dB SPL
S/N ratio: >44dB

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

Features ECMR Reciever
  • :
  • 16 selectable channels
  • 200' range
  • UHF frequency
  • Diversity antennas
  • Output volume control
  • AF level indicator
  • IR sSync
  • Squelch adjustment
  • XLR / ¼" outputs
  • Rugged plastic casing
  • MBP52 bodypack transmitter:
  • IR Sync
  • Mic/0/-10dB
  • 2 AA batteries
  • 3-position switch
  • Low-battery indicator
  • 2.8 oz. (80 g)
  • 52LV Lavalier Microphone:
  • Unidirectional Element
  • Lapel / lavalier
  • Freq. Response: 100Hz-16kHz
Specifications
  • ECMR Reciever:
    Audio Output Level: (+/-30KHz deviation, 1KHz tone) XLR connector (into 600 ohm load) -12dBV ¼" connector (into 3k ohm load) -18dBV
    Output Impedance: XLR connector 200Ohms ¼" connector 1KOhms
    XLR output: Impedance balanced
    Pin1ï¼Ground (cable shield)
    Pin2ï¼Audio
    Pin3ï¼No Audio
    Sensitivity: -93dBm for 30dB
    Image Rejection: >90dB
    Dimensions: 1-3/4" x 9-1/4" x 4-3/4"
    (44.45mm H x 235mm W x 121mm D)
    Weight: .85 lb. (.39kg)
    Power Requirements: 13.5 V dc at 300mA, supplied by external power supply.

    MBP52 Bodypack Transmitter:
    Max audio input level: 0dBV to +10dBV
    Gain adjustment range: 20dB
    Input impedance: 5k ohm
    Dimensions: 3-5/16" x 2-5/8" x 1" (85mm H x 65mm W x 24mm D)
    Weight: 3.0oz (85 g) (without batteries)
    Power requirements: 2 AA batteries (alkaline or rechargeable)
    Battery life: Approx. 8 hours

    52LV Lavalier Microphone:
    Sensitivity. -64 ± 4dB (0dB=1V/UBR 1KHz)
    Frequency response: 100Hz-16kHz
    Output impedance: 2k ohm max. (RL-2.2k ohm)
    Directionality: Unidirectional
    Working voltage range: 1 10V
    Standard working voltage: 3V
    Current consumption 250uA (Max.)
    Maximum input sound pressure: 110dB SPL
    S/N ratio: >44dB
Warranty
MANUFACTURER'S WARRANTY
One year parts and labor warranty on all products, including power supply.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.