Galaxy Audio AS-1110 UHF Wireless Personal Monitor System
Write a Review
The Galaxy Audio AS-1110 UHF Wireless Personal Monitor System packs an extra special punch thanks to the included EB10 earbuds which features dual drivers with a passive crossover ” one to deliver low... Read More
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The Galaxy Audio AS-1110 UHF Wireless Personal Monitor System packs an extra special punch thanks to the included EB10 earbuds which features dual drivers with a passive crossover ” one to deliver low frequencies, and one to deliver the high frequencies. The EB10 earbuds have a max power input of 150mW and a sensitivity of 120 dB/mW, and come with a 4' cord and 3 silicon sleeves that let you find a fit that's right for you.
The AS-1110 wireless system also includes an AS-1100T single rackmount transmitter with stereo XLR/1/4" inputs, headphone output, and an LCD display which displays the channel and input level. It also has an AS-1100R body-pack receiver which has an LCD with channel, battery level, and RF/AF indicator. The entire system gives you a 300' range and 120 selectable UHF frequencies to work within.
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
AS-1100T wireless transmitter
Transmits in stereo or mono
Light up LCD display
Channel number and frequency
120 selectable channels
XLR/1/4" combo input
AF L/R indicator
AS-1100R wireless receiver
LCD display with backlight
Headphone output Volume control
4-bar battery life Indicator
RF and AF indicator
100 mW headphone output
Runs on 2 'AA' Batteries
80 mW Audio Output
3.5 oz (100 g)
Dual drivers with a passive crossover
AS-1110 system Frequency range and transmitter output level Band: UHF Frequency Range: 655 MHz and 679 MHz Transmitter Output Level: 10dBm Operating Range: Under Typical Conditions 300' (92m) Note: actual range depends on RF signal absorption, reflection, and interference Audio Frequency Response: +/-3dB 60Hz16KHz Total Harmonic Distortion: +/-30KHz deviation 1KHz tone <1% Dynamic Range: >90dB A-weighted Operating Temperature: Range 14F to 122F (-10 C to +50 C) Note: battery characteristics may limit this range
AS-1100T transmitter Max Audio input level: +6dBV Gain adjustment range: 40dB Input impedance: 100KOhms Dimensions (HxWxD): 1.5" x 8.3" x 3.78" (38mm x 212mm x 96mm) Weight: 21oz. (605g) Power requirements: 12-18VDC at 300mA supplied by external power supply XLR input: Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio
AS-1100R Body-pack Receiver Audio Output Level: 100mW Sensitivity: -94dBm for 30dB Image Rejection: >55dB Dimensions (HxWxD): 3.74" x 2.6" x 1" (95mm x 65mm x 25mm) Weight: 3.5oz (100g) without batteries Power Requirements: 2 "AA" size alkaline or rechargeable batteries Battery life: About 5 hours
EB10 Sensitivity: (@ 1kHz) 114 dB/mW Frequency Response: 20Hz - 20kHz Transducer Type: Dynamic Impedance: 16Ohms Distortion: Less than 0.3% Cord Length: 59" with 3.5mm stereo plug Net Weight: .21oz. (6g) (excluding cable)
One year parts and labor warranty on all products, including power supply.