Designed for the most critical, ultra-low noise installations, the Furman P-2400 IT is a symmetrically balanced power conditioner, providing unparalleled AC noise reduction and 100% isolation from the... Click To Read More About This Product
Designed for the most critical, ultra-low noise installations, the Furman P-2400 IT is a symmetrically balanced power conditioner, providing unparalleled AC noise reduction and 100% isolation from the power grid for the lowest noise floor possible. The Furman P-2400 IT power conditioner features over 80dB of common-mode and over 50dB of differential-mode noise reduction for recording, mastering, and broadcast studios, or anywhere noise-free performance is critical. With 100% isolation from line, neutral, and ground, the Furman power conditioner is also ideal for breaking AC ground loops without rewiring or hiring an electrician.
The Furman P-2400 IT power conditioner features a specially wound and shielded toroidal balanced isolation transformer specifically designed to reduce hum pickup by sensitive equipment when ultra-low-noise is a must. Additionally, Furman's Series Multi-Stage Protection (SMP) features their Extreme Voltage Shutdown (EVS) circuits, and exclusive Linear Filtering Technology (LiFT) that combine to ensure you get what you've grown to expect from Furman”audio equipment with uncompromised protection and purification.
Symmetrically Balanced Power
For the most critical, low-noise applications, Furman's Symmetrically Balanced Power provides an invisible noise floor, while completely breaking ground loops without dismantling equipment or rewiring. This Furman power conditioner's noise reduction is extraordinarily efficient and linear across a huge frequency range. The transformer has completely reworked your incoming AC and the result is perfectly clean power devoid of the masking effects of AC noise with 100% isolation from line, neutral, and ground.
Furman's SMP and EVS circuitry safeguards equipment from transient voltage events (such as surges and spikes), as well as sustained over-voltage conditions (commonly caused by wiring faults), for complete and comprehensive protection of sensitive equipment.
Innovative Convenience and Monitoring Features
The Furman P-2400 IT power conditioner's front panel LED window displays incoming voltage or output current, with "Protection OK," "Extreme Voltage," and color-coded "Voltage Range" indicators for comprehensive power monitoring. The Furman power conditioner's front-panel USB outlet charges most personal media devices and cell phones right at your equipment rack.
Symmetrically balanced power virtually eliminates common mode noise for the lowest noise floor possible
Furman's exclusive SMP technology provides the highest level of surge & spike protection available
LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity
Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions
Protection OK, Extreme Voltage, and color-coded voltage range indicators provide information on power quality and operational status of unit
Large LED voltmeter/ammeter displays incoming voltage and output current draw
Isolated outlet banks minimize inter-component interference and noise contamination
Front panel USB convenience outlets allows you to charge most media devices or power a USB lamp
20 amp rating featuring a high inrush magnetic circuit breaker for added protection
14 total outlets (twelve rear panel outlets and two front panel convenience outlet)
Maximum Current: 20 amps
Line Cord: 12AWG X 3, 10FT long, NEMA 5-20 plug
Operating Voltage: 90 to 139 VAC, 60 Hz
Over-Voltage Shutdown: 140 VAC Nominal
Spike Protection Mode: Line to neutral, zero ground leakage
Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps
Response Time: 1 nanosecond
Maximum Surge Current: 6,500 Amps
Noise Attenuation: Transverse Mode Noise:
10dB @ 10kHz, 40dB @ 100kHz, 50dB @ 500kHz
Common Mode Noise: 80dB @ 20kHz, 40dB @ 20kHz to 1MHz
Dimensions: 19"W x 14"D x 5.25"H (483mm x 356mm x 133mm)
Weight: 90lb. (41kg.)
Power Consumption: 26 watts (for display and control circuits)
Receptacles: 10 Ultra-low resistance isolated-ground hubbell outlets, 2 GFCI front panel outlets
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.