Furman P-1800 PF R Power Conditoner / Surge Suppressor  

Item #: 
127474181043768698
  • Write a Review

Engineered specifically for use with instrument amplifiers and other high-current equipment, the Furman P-1800 PF R offers a stable, protected, and filtered low-impedance powered supply so you're elec... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

Engineered specifically for use with instrument amplifiers and other high-current equipment, the Furman P-1800 PF R offers a stable, protected, and filtered low-impedance powered supply so you're electronics deliver maximum performance. Furman's exclusive Power Factor provides a 45A peak current reservoir to minimize the detrimental effects of line impedance on high-current gear such as amplifiers and powered monitors. Clear Tone Technology provides additional line noise filtration tuned for instrument amplifiers for clean and consistent tone. You also get professional-level protection thanks to Furman's exclusive SMP (Series Mutli-Stage Protection) and EVS (Extreme Voltage Shutdown) technologies.

Power Factor Technology
Your amp needs a lot of power to sound best. If you're plugging into the wall, there's a good chance your amp is not going to get the current it needs when pushed. Furman's exclusive Power Factor Technology provides a 45A peak current reservoir to give your amp the headroom it needs to operate at maximum efficiency. No matter what venue or club, or how close or far away from the power panel, Furman's Power Factor Technology keeps your instrument amplifier's tone consistent and sounding it's best.

Clear Tone Technology
The Furman P-1800 PF R Clear Tone Technology works in unison with Power Factor Technology and Linear Filtering Technology to add an additional layer of AC noise filtration specifically engineered for instrument amplifiers. Clear Tone Technology provides tuned circuits that unveil instrument tone, harmonics, and clarity, resulting in a fuller sound and improved dynamic response.

Features
  • Power Factor Technology supplies 45+ amps of instantaneous reserve current, on demand, for power starved amplifiers
  • Furman's exclusive SMP technology provides high level of surge & spike protection
  • LiFT offers AC power filtering to ensure clean power for audio & video clarity
  • Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions
  • LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised
  • Isolated outlet banks minimize inter-component interference and noise contamination
  • Clear Tone Technology provides tuned filtering circuits engineered for instrument amplifiers to provide a clean and consistent tone
  • Large digital voltmeter with discrete dimmer button displays incoming line voltage
  • Three widely spaced outlets accommodate bulky AC power transformers
  • 15 Amp rating featuring a high inrush magnetic circuit breaker for added protection
  • Nine total outlets (8 rear panel outlets and one front panel convenience outlet)
  • Rear panel BNC connector powers any standard gooseneck lamp for rear rack illumination
Specifications
  • Maximum Current: 15 amps @ 124 Volts
  • Line Cord: Captive 3/14 AWG, 10 ft. black cord with NEMA 15 plug
  • BNC Socket w/Switch: 12VAC 500MA maxx (lamp not included)
  • Operating Voltage: 90 to 139 VAC
  • Over-Voltage Shutdown: 140 VAC Nominal
  • Spike Protection Mode: Line to neutral, zero ground leakage
  • Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps
  • Response Time: 1 nanosecond
  • Maximum Surge Current: 6,500 Amps
  • Noise Attenuation: 30dB @ 2kHz, 40dB @ 10kHz, 50dB @ 20kHz, 70dB @ 100kHz
  • Power Consumption: 8W
  • Reactive Power: 460 VA
  • Dimensions: 19"W x 12"D x 1.75"H
  • Weight: 13lb.
  • Customer Reviews
Loading....

Review Snapshot

by PowerReviews
FurmanP-1800 PF R Power Conditoner / Surge Suppressor
 
5.0

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 2 customers

Displaying reviews 1-2

Back to Top

(9 of 9 customers found this review helpful)

 
5.0

Consistant Power

By Guitar5986

from Salt Lake City, Utah

Comments about Furman P-1800 PF R Power Conditoner / Surge Suppressor:

Absolutely fantastic unit. The power in my house tends to be a bit finicky at best. Sometimes my gear sounds better than at other times. With this unit my gear sounds consistently its best. I swapped out an old Furman unit for this one and the first thing I noticed was that this thing is quite heavy compared to my old PL-Series II. It definitely does the trick though and supplies your amp and other equipment with lots of clean and pure power. While the difference in my setup isn't massive (I'm probably the only one who could tell a difference because I'm so used to my gear) I could see this unit really becoming priceless playing shows while dealing with low quality power. Haven't had a chance to test that yet. In spite the cost, it was definitely a worthwhile buy for my home studio

(2 of 3 customers found this review helpful)

 
5.0

Everyone needs this

By Robert

from Farmington Arkansas

Comments about Furman P-1800 PF R Power Conditoner / Surge Suppressor:

Bought one and all I can say is why don't you have one? All the expense in your gear and you don't protect it? BUY ONE NOW! You will thank me later.

Displaying reviews 1-2

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.