The Fostex PM-2 8" Powered Studio Monitor - Pair are equipped with ample power and designed with a wide sweet spot. The PM2 has the versatility to handle any studio application. Thanks to careful engi... Click To Read More About This Product
Find a similar product below or contact us for a recommendation of a great alternative.
Call: 866-498-7882 Email
The Fostex PM-2 8" Powered Studio Monitor - Pair are equipped with ample power and designed with a wide sweet spot. The PM2 has the versatility to handle any studio application. Thanks to careful engineering, sound remains natural and transparent across the audio spectrum, even at high SPLs. Features 240W of power, 2 internal amplifiers for pristine bi-amplification, UFLC one-inch soft-dome HF unit, 8" LF woofer, HF gain control, overall volume control, and a 0dB/-3dB/+3dB switch for the LF unit.
The LF drivers have been developed to obtain extremely pure music reproduction by employing the latest technology in cone material. The cone uses a mixture of cut and milled fibers that are made from aromatic polyamide. It is then impregnated with resins to simultaneously achieve high rigidity and optimum damping. The cone also has an olefin film thermally adhered to its surface to control frequency response and to establish long term reliability. The center dust cap is made of non-wood cellulose material and is also impregnated with resin. The voice coil is made of super-high purity copper wire to achieve extremely low distortion. (<0.05% THD @50W/6?)
The one-inch soft dome tweeter employs Fostex's UFLC technology (Poly Urethane Film Laminated Cloth) to achieve lightweight and high-stability performance.
The amplifiers are precisely calibrated to match the performance capability of the drivers. Both drivers are powered by specifically matched amplifiers--120W RMS for the woofer and 120W RMS for the tweeter.
240W of biamplified power
2 internal amplifiers
UFLC one inch soft-dome HF unit
8" LF woofer
HF gain control
Overall volume control
0dB/-3dB/+3dB switch for the LF unit
Free field +/- 2dB, 50Hz to 20kHz
Low Freq. Cut-off: 40Hz
High Freq. Cut-off: 22kHz
Low frequency control: +/- 3dB (at 60HZ)
High frequency control: +/- 3dB (at 5kHz)
High frequency: 120W
Low frequency: 120W
Distortion: <0.05% THD @ 50W/6 ohm, 20Hz-20kHz
S/N: >90dB, 20Hz - 30kHz
Slew rate: 10V/uSec
Weight: 32.4 lbs each
Shipping Weight: 35-3/4 lbs. each
Dimensions: 10"W x 16-1/8"H x 11-3/4"D (incl. heat sink; 10-5/8" excl. heat sink
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.