FREE 2-Day Standard Ground Shipping (edit) Get Details

More Info About Free 2-Day Standard Ground Shipping

Close Window

Focusrite ISA428MKII and Sterling ST69 Microphone  

Item #: 
1320159956504
  • Write a Review

This is a superb front end for your recording system, whether for a home studio or a professional recording suite. The Focusrite ISA428 MkII provides four of Focusrite's prestigious transformer-based ... Read More

Price:
$2,09899.00
Add to Wish List
Special Financing Offer
$59/month for 36 months
Guitar Center Gear Card

0% Interest for 36 Months*. 36 Equal Monthly Payments required. Valid through 12/31/2016
Get Details

GC Gear Card
Special Financing Offers
Learn More
 
PICK UP IN STORE Available in: 3-7 Days (estimated) Denver, CO (5.5  mi) Change Pick Up Store


,
SUN:11AM-7PM
MON-FRI:10AM-9PM
SAT:10AM-8PM
  • Pro Coverage Eligible
  • Free Shipping
  • Easy Returns

QUESTIONS? CONNECT WITH AN EXPERT INSTANTLY.

  • Chat Now
  • Call 866-498-7882
Overview

This is a superb front end for your recording system, whether for a home studio or a professional recording suite. The Focusrite ISA428 MkII provides four of Focusrite's prestigious transformer-based microphone preamps in one convenient rackmountable chassis. It features the same classic circuitry and renowned audio quality found in the original Focusrite ISA mic pre at a new level of affordability. With selectable input impedance, direct instrument inputs and an optional eight channels of high-quality analogue to digital conversion, the ISA428 MkII creates the perfect front end for the discerning recording professional. Add to that a Sterling ST69 microphone and you have the beginning of a very sweet signal chain.

Sterling ST 69
Sterling Audio's ST69 Tube Microphone is an excellent choice for recording engineers and musicians looking for a superior studio microphone. A combination of new and traditional technology, blended with our Disk Resonator system, yields wide frequency response and quick transient response without sacrificing warmth and tone. It's ideal for capturing the full, detailed sound of vocals, acoustic & electric instruments, and drums. And its precision machined, brushed stainless-steel finish complements the ST69's technical brilliance.

ISA428 MKII
First introduced in 1985, the ISA microphone preamp holds a reputation for outstanding transparency along with subtle warmth contributed by transformer core saturation. The addition of a variable impedance circuit allows ISA users to perfectly match the preamp with any microphone, or to use different settings creatively to shape the sound of the microphone. Unchanged for decades, the ISA microphone preamp topology offers incredible clarity and the signature Focusrite sound that makes it the top choice among many audio professionals today.

The optional class-leading eight-channel A-D converter option used with the ISA828 is also compatible with the ISA428 MkII. Along with the four mic preamp inputs, four additional inputs allow you to route other line signals through the converter. More information about the ISA428 MkII A-D converter option can be found here.

Four instrument inputs, instantly accessible on the front panel, allow quick and easy connection without the need for a separate DI box. Extra processing can be placed between preamp and conversion via the units dedicated insert points, featured on every channel. Finally, accurate six-segment LED metering is designed to catch even the fastest transients on every channel.

Over 25 years, Focusrite has earned a reputation for bringing superb audio quality and engineering excellence to an array of audio professionals. Whether you're looking to preserve the sound of your classic microphones, or searching for the perfect front end for your digital studio, the ISA428 MkII brings legendary tools to your studio at an exceptional new price.

Features
  • Focusrite ISA428 MkII
  • Four ISA series transformer-based preamps
  • Eight-channel optional A-D converter
  • Selectable impedance
  • Four front panel instrument inputs
  • Dedicated analogue insert points
  • Variable high-pass Focusrite filter
  • Accurate LED meters for every channel
  • Sterling ST69
  • Cardioid, Omni, and Figure-8 patterns
  • Low noise, low heat, 6205 tube circuit
  • Double-sided 1" all brass capsule, hand assembled and oven baked for long term stable operation
  • Ultra-thin 3-micron gold-evaporated Mylar diaphragm provides sonic detail and accuracy
  • Disk ResonatorTM design extends high-frequencies naturally
  • High pass filter and -10dB pad
  • Custom-wound nickel core output transformer, optimized for the ST69
  • Brushed stainless steel body and head
Specifications
  • Sterling ST69
    preamp Class-A Tube
    polar patterns Cardioid, Omni, Figure-8
    frequency response 20Hz - 20kHz
    High pass filter Switchable 75Hz, 12dB/octave
    attenuation pad Switchable -10dB
    Sensitivity 30mV/Pa
    Maximum SpL 130/140dB SPL
    Equivalent noise 23dB SPL
    Typical Load impedance >1000 Ohms
    Output Source impedance 200 Ohms, transformer isolated
    dimensions 7.5" long, 1.8" max. diameter
    Weight 1.2 lbs.
    power Included power supply
    Focusrite ISA48 MkII
    Mic Inputs
    ¢ Frequency response at minimum gain (0dB): -0.35dB at 20Hz and -3dB at 122kHz
    ¢ Frequency response at maximum gain (60dB): -2.5dB at 20Hz and -3dB 103kHz
    ¢ Gain range: 0dB to +60dB in 10dB steps, plus 0dB to +20dB continuously variable trim
    ¢ Maximum headroom: +7.4dBu
    ¢ THD+N: 0.0009% (measured at 1kHz -20dBu input signal, at 30dB gain setting, with a 20Hz/22kHz bandpass filter)
    ¢ Noise EIN: -126dB (measured at 60dB of gain with 150Î termination and 20Hz/22kHz bandpass filter)
    ¢ Noise at main output with unity gain: -98dBu (measured with a 20Hz/22kHz bandpass filter)
    ¢ SNR: 123dB (relative to max output 25dBu)
    ¢ SNR: 120dB (relative to 0dBFS (+22dBu)
    ¢ CMRR: 88dB.
    ¢ Input Impedance, variable: 600Î, 1400Î, 2400Î, 6800Î
    Line Inputs
    ¢ Frequency Response at unity gain (0dB): -0.3dB at 20Hz and -3dB at 94kHz
    ¢ Gain range: -20dB to +10dB in 10dB steps, plus 0dB to +20dB continuously variable trim
    ¢ Maximum headroom: +25.4dBu
    ¢ THD+N: 0.002% (measured with +4dBu input signal, 0dB gain setting, with a 20Hz/22kHz bandpass filter)
    ¢ Noise at main output with unity gain: -91dBu (measured with a 20Hz/22kHz bandpass filter)
    ¢ SNR: 116dB (relative to max output 25dBu)
    ¢ SNR: 113dB (relative to 0dBFS +22dBu). Input Impedance: 10kÎ
    Instrument Inputs
    ¢ Frequency Response at +10dB gain: -0.2dB at 20Hz and 0dB at 200kHz
    ¢ Frequency Response at +40dB gain: -3dB at 20Hz and -3dB at 38.4kHz
    ¢ Gain range: +10dB to +40dB continuously variable
    ¢ Maximum headroom: +11.5dBu
    ¢ THD+N: 0.006% (measured with -20dBu input signal, at minimum gain (+10dB), with a 20Hz/22kHz bandpass filter)
    ¢ Noise at main output with minimum gain (+10dB): -95dBu (measured with a 20Hz/22kHz bandpass filter)
    ¢ Input Impedance = >1MÎ
    High Pass Filter
    ¢ Roll off = 18dB per octave 3 pole filter
    ¢ Frequency range: 16Hz to 420Hz (continuously variable, measured at the 3dB down point)
    Meters
    ¢ 6 LED meter is calibrated 0dBFS = +22dBu (the maximum level which can be correctly converted by the optional internal A/D converter before overload occurs). The meter calibration points are as follows:
    Meter panel calibration value in dBFS / Equivalent dBu value
    0dBFS / +22dBu
    -2dBFS / +20dBu
    -6dBFS / +16dBu
    -12dBFS / +10dBu
    -18dBFS / +4dBu
    -42dBFS / -20dBu

    Front and rear connectivity
    Analogue Channel Inputs (Inputs 1-4)
    ¢ 4 instrument 1„4" TS jack inputs on front panel
    ¢ 4 microphone XLR inputs on rear panel
    ¢ 4 line 1„4" TRS jacks on rear panel
    ¢ 4 insert return 1„4" TRS jacks on rear panel
    ¢ 4 ADC XLR inputs on rear panel
    Analogue Audio Outputs (Outputs 1-4)
    ¢ 4 line XLR outputs on rear panel
    ¢ 4 insert send 1„4" TRS jacks on rear panel
    Other I/O
    ¢ IEC power input connector 100Vac - 240Vac
    Front Panel Indicators
    ¢ 8 output meters, 6 segment
    ¢ 4 30-60 mic gain range selection indicator
    ¢ 4 +48V phantom power indicator
    ¢ 4 Phase indicator
    ¢ 4 Insert In indicator
    ¢ 4 Filter In indicator
    ¢ 4 Input selection indicators (Mic, Line, Inst)
    ¢ 4 Z In microphone input impedance selection indicators (Low, ISA110, Med, High) Clock select indicators (44.1, 48, 88.2, 96, 176.4, 192)
    ¢ Ext clock indicators (Lock, Word clock, 256X)
    Weight
    5.5kg
    12.2lbs
    Dimensions (W x H x D)
    480mm (W) x 88mm (H) x 280mm (D)
    19" (W) x 3.5" (H) x 11" (D)


Warranty
MANUFACTURER'S WARRANTY
All Focusrite products are built to the highest standards and should provide reliable performance for many years, subject to reasonable care, use, transportation and storage.

In the event of a Manufacturing Defect becoming evident within 12 months from date of purchase Focusrite undertakes that the product will be repaired or replaced free of charge if the product is returned to the authorised dealer from whom it was purchased. In these circumstances, or if you need an out-of-warranty repair to your Focusrite product, please contact your local Focusrite distributor in your country of residence or business : Find your local distributor here and you will be advised of the correct return procedure.

Alternatively contact the Focusrite Reseller from which you purchased the product. If you purchase a Focusrite product outside your country of residence or business you will not be entitled to ask your local Focusrite Distributor to honour this Limited Warranty, although you may request a chargeable repair.

Alternatively, the unit may be returned at your cost to the dealer you purchased the unit from so that they can organise a Warranty repair with their Focusrite Distributor.

This Warranty does not include cost of shipping to and from the authorised dealer from whom it was purchased. In every case it will be necessary to provide the original invoice or store receipt to accompany the defective product to the supplying dealer. This Limited Warranty is offered solely to the first purchaser of the product from an Authorised Focusrite Reseller (defined as a reseller which has purchased the Product directly from Focusrite Audio Engineering Ltd. in the UK or its Authorised Distributors outside the U.K,) and is not transferable.

This Warranty is in addition to your Statutory Rights in the country of purchase.

Please note: A Manufacturing Defect is defined as a defect in the performance of the product which may be expected from a reasonable interpretation of the published description and performance specifications as published by Focusrite Audio Engineering Ltd. This does not include damage caused by post-purchase transportation, storage or careless handling, nor damage caused by misuse.

A significant proportion of products returned under Warranty (which are very few in number compared to numbers sold) are found not to exhibit any fault at all. Please check that the mains voltage is correctly set for your local supply and that your connecting cables are in good order and correctly connected.

If in doubt about the product functions please read the user guide and if necessary contact your dealer for advice before returning the product to the supplying dealer. You can also contact the Focusrite Tech Support team at the Focusrite Answerbase for general advice.


GUITAR CENTER'S PRO COVERAGE
Pro Coverage gives you added warranty protection for your new gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Read More.

Pro Coverage includes
  • Accidental damage protection (new gear only)
  • Expedited repair
  • Free shipping (for returns or repairs)
  • 100% coverage for commercial use
  • Extended return period
  • Extended price protection
  • No lemon guarantee
  • Free transfer of coverage to a new owner
  • Repair costs covered for up to three years from date of purchase
  • Repair authorization-toll-free by phone or via the web
  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.