An all-Focusrite signal path from input to AD, and format conversion too.

View all items from this brand

The Focusrite ISA 2-Channel 192kHz A/D Card allows the Focusrite ISA ONE preamp to be used as a high-quality two-channel ADC to convert analog signals to various digital formats (AES, S/PDIF and ADAT). And, since AD should be the last process on your input chain (before recorder), this system lets you insert a signal processor, such as a compressor or EQ, between the ISA Preamp and the ISA sound card. The ISA 2-Channel 192kHz A/D Card also has connections for word-clock in/out.

The card provides optical digital outputs for both ISA One ADC input channels, which operate over the sample frequency ranges 44.1, 48, 88.2, 96kHz (ADAT), 176.4, and 192kHz (S/PDIF). The card features an ADAT-type lightpipe output and S/PDIF TOSlink output connectors. The card also provides AES and S/PDIF format outputs via a 9-pin D-type connector on the rear panel. The full range of sample rates up to 192kHz are available.*

The card can be retrofitted to the ISA One at any time. Installation is simple and can be done by the user with no engineering experience necessary.

*To access the digital signals from the 9-pin D-type output connector, an AES or S/PDIF D-type conversion cable must be purchased separately in the following configurations:

AES cable: 9-pin D-type to 4 male XLR,
S/PDIF cable: 9-pin D-type to 4 male RCA phono

Focusrite ISA One Two Channel 192K A D Card Features:

Stereo 24-bit / 192kHz AES/EBU, S/PDIF and ADAT ADC
Cutting-edge conversion technology
2 channels of the highest quality 24-bit conversion at all sample rates up to 192kHz
Incredibly low jitter significantly improves sound quality.

Focusrite ISA One Two Channel 192K A D Card Specifications:

Output formats include 2 channel single/dual wire AES/EBU or 2 channel S/PDIF, all via a 9 pin D-type connector, as well as optical S/PDIF and ADAT
ADAT (TOSlink) port is stereo and operates at 24-bit, up to 96kHz
Jitter: 44.1kHz-192kHz < 20 psec

Focusrite ISA One Two Channel 192K A D Card

All Focusrite products are built to the highest standards and should provide reliable performance for many years, subject to reasonable care, use, transportation and storage.

In the event of a Manufacturing Defect becoming evident within 12 months from date of purchase Focusrite undertakes that the product will be repaired or replaced free of charge if the product is returned to the authorised dealer from whom it was purchased. In these circumstances, or if you need an out-of-warranty repair to your Focusrite product, please contact your local Focusrite distributor in your country of residence or business : Find your local distributor here and you will be advised of the correct return procedure.

Alternatively contact the Focusrite Reseller from which you purchased the product. If you purchase a Focusrite product outside your country of residence or business you will not be entitled to ask your local Focusrite Distributor to honour this Limited Warranty, although you may request a chargeable repair.

Alternatively, the unit may be returned at your cost to the dealer you purchased the unit from so that they can organise a Warranty repair with their Focusrite Distributor.

This Warranty does not include cost of shipping to and from the authorised dealer from whom it was purchased. In every case it will be necessary to provide the original invoice or store receipt to accompany the defective product to the supplying dealer. This Limited Warranty is offered solely to the first purchaser of the product from an Authorised Focusrite Reseller (defined as a reseller which has purchased the Product directly from Focusrite Audio Engineering Ltd. in the UK or its Authorised Distributors outside the U.K,) and is not transferable.

This Warranty is in addition to your Statutory Rights in the country of purchase.

Please note: A Manufacturing Defect is defined as a defect in the performance of the product which may be expected from a reasonable interpretation of the published description and performance specifications as published by Focusrite Audio Engineering Ltd. This does not include damage caused by post-purchase transportation, storage or careless handling, nor damage caused by misuse.

A significant proportion of products returned under Warranty (which are very few in number compared to numbers sold) are found not to exhibit any fault at all. Please check that the mains voltage is correctly set for your local supply and that your connecting cables are in good order and correctly connected.

If in doubt about the product functions please read the user guide and if necessary contact your dealer for advice before returning the product to the supplying dealer. You can also contact the Focusrite Tech Support team at the Focusrite Answerbase for general advice.

Get your gear covered!

Now you can get added warranty protection for your new gear. Pro Coverage steps in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program offers you UPGRADED COVERAGE if your product ever fails!

Pro Coverage includes:

• Accidental damage protection (new gear only)
• Expedited Repair
• Free Shipping (for returns or repairs)
• 100% Coverage for Commercial Use
• Extended Return Period
• Extended Price Protection
• No Lemon Guarantee
• Free Transfer of Coverage to a new owner
• Repair Costs Covered for up to 3 years from date of purchase
• Repairs Can Be Authorized Toll-Free by Phone or the via the web