The SC305 is a three-way monitor, carefully designed to be comfortable and precise in either stereo or surround environments. In the latter case, the SC305 will work perfectly as a center channel for ... Click To Read More About This Product
The SC305 is a three-way monitor, carefully designed to be comfortable and precise in either stereo or surround environments. In the latter case, the SC305 will work perfectly as a center channel for smaller systems.
The SC305 combines the power from three different amplifiers to deliver efficient, dynamic, low noise sound reproduction. EVE's three-way systems are developed for critical and detailed listening, not just to deliver power and thunderous bass (though that additionally is among their capabilities).
EVE's three-way systems are designed around the concept that proper frequency distribution between all individual components raises speaker efficiency. In the SC305, one of the woofers delivers sound only up to 350 Hz, functioning as a kind of "bass woofer". The other woofer gives you a fuller range up to the 3000 Hz crossover frequency as a bass-midrange driver.
This means less effective physical work being made by each individual woofer, which in turn results in less mechanical inertia and a more efficient sound transmission. Both woofers consist of EVE's proprietary 5" SilverCone, the same one used in the smaller SC205 model. However, due to the fact that two of these woofers are being used simultaneously, you get a bigger frequency reponse - down to 50 Hz.
The SC305 also makes use of the proprietary AMT RS3 tweeter, which uses a bigger front plate and a bigger internal magnet to drive the AMT tweeter with greater efficiency. The three 50 W PWM power amplifiers won't leave you lacking any power either. The SC305 is among the most detailed three-way monitor speakers in the market for its specific size and price range.
And no worries determining how to place the SC305 in your room or studio properly. Our DSP section will assist you in choosing the speaker for left and right hand side. So you will always get proper symmetry between your speakers, instead of having to move them around as usual. With a DIP switch, located on rear of the speakers these settings for room adaption can be temporarily locked.
As with every other EVE Audio speaker, you get both balanced XLR inputs and unbalanced RCA inputs for greater convenience.
With every EVE Audio speaker, you also get high resolution DSP electronics. One push knob operation and you will have access to accurate volume control and several different filter settings that will help you tailor your monitors to the way you work. And if you always avoid digital processing, the DSP engine is supported with a high quality A/D converter from Burr-Brown, which delivers a pristine signal to the DSP section. And since the PWM amplifiers are directly connected to the DSP, no additional conversion is necessary.
Bass Port Design
It's all in the geometry. One of the downside effects of port compression is bass distortion. As you turn up the volume, the efficiency of the port reduces and distortion will increase. EVE opted for a large rear rectangular port with no hard edges for our bass port designs. That's one of the reasons EVE monitors have a high efficiency on the lower frequencies. The results? High sound pressures with tight and punchy bass frequencies that don't cause port distortion. Crank up the volume, and EVE will deliver a round bass. And with no holes to look at every time you glance at your speakers.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.