Item # 660086 | Customer Ratings: ( 5 Based on 6 reviews)

Print this page

  1. Select the information you'd like to print out.
  2. Cancel
Eminence Legend BP102 10 Inch 200W Bass Speaker
Use Add to Cart below to have it shipped to you, or to a store near you.
  • Store
  • Availability
Guaranteed Lowest Price
Pickup In Store

Solid bass sound with tight lows.

The Eminence Legend BP102 10" Bass Speaker delivers rich bass tone with a lot of punch. Recommended for professional bass guitar applications in sealed or vented enclosures. The replacement speaker works well in single or multi-driver designs.

Use the Eminence Legend BP102 as a direct replacement speaker in the Ampeg SVT-810E, the Kustom Groove 4120, the Gallien-Krueger 4120 SBX, the Ashdown MAG 410T & MAG810T, and the Basson B410B speaker cabinets. Eminence recommends the Legend BP102 as a direct replacement in the Kustom Groove 310C, the Ampeg BA210SP, the Peavey Bam 210 combo amps.

Eminence Legend BP102 10 Inch 200W Bass Speaker Features:

  • Rich bass tone with good punch
    Tight low-end sound
    Recommended for sealed or vented enclosures
    Works well in single or multi-driver cabs

Eminence Legend BP102 10 Inch 200W Bass Speaker Specifications:

  • Nominal Basket Diameter: 10", 254mm
    Nominal Impedance*: 8 ohms
    Power Rating**: 200W
    Resonance: 35Hz
    Usable Frequency Range: 44Hz-4kHz
    Sensitivity***: 92
    Magnet Weight: 38 oz.
    Gap Height: 0.312", 7.92mm
    Voice Coil Diameter : 2", 50.8mm

    Resonant Frequency (fs): 35Hz
    DC Resistance (Re): 5.59
    Coil Inductance (Le): 0.83mH
    Mechanical Q (Qms): 5.36
    Electromagnetic Q (Qes): 0.47
    Total Q (Qts): 0.43
    Compliance Equivalent Volume (Vas): 91.2 liters / 3.2 cu. ft.
    Peak Diaphragm Displacement Volume (Vd): 207cc
    Mechanical Compliance of Suspension (Cms): 0.54mm/N
    BL Product (BL): 10.0 T-M
    Diaphragm Mass inc. Airload (Mms): 38 grams
    Efficiency Bandwidth Product (EBP): 75
    Maximum Linear Excursion (Xmax): 6.2mm
    Surface Area of Cone (Sd): 334.5 cm2
    Maximum Mechanical Limit (Xlim): 10.0mm

    Mounting Information
    Recommended Enclosure Volume
    Sealed: 14-28 liters/ 0.5-1 cu.ft.
    Vented: 25.5-62 liters/ 0.9-2.2 cu.ft.
    Overall Diameter: 10.08", 256.1mm
    Baffle Hole Diameter: 9.05", 229.7mm
    Front Sealing Gasket: fitted as standard
    Rear Sealing Gasket:
    Mounting Holes Diameter: 0.25", 6.4mm
    Mounting Holes B.C.D.: 9.66", 245.4mm
    Depth: 4.25", 108mm
    Net Weight: 8.9 lb., 4 kg
    Shipping Weight: 9.1 lbs., 4.1 kg

    Materials of Construction
    Copper voice coil
    Polyimide former
    Ferrite magnet
    Non-vented core
    Pressed steel basket
    Paper Cone
    Cloth cone edge
    Zurette dust cap

    *Please inquire about alternative impedances.
    **Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
    ***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms.
    Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software
    calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with
    fiberglass on all six surfaces (three with custom-made wedges)

Eminence Legend BP102 10 Inch 200W Bass Speaker

7 year parts and labor warranty against defects on all speakers sold under Eminence name.

Get your gear covered!

Now you can get added warranty protection for your new gear. Pro Coverage steps in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program offers you UPGRADED COVERAGE if your product ever fails!

Pro Coverage includes:

  • Accidental damage protection (new gear only)
  • Expedited Repair
  • Free Shipping (for returns or repairs)
  • 100% Coverage for Commercial Use
  • Extended Return Period
  • Extended Price Protection
  • No Lemon Guarantee
  • Free Transfer of Coverage to a new owner
  • Repair Costs Covered for up to 3 years from date of purchase
  • Repairs Can Be Authorized Toll-Free by Phone or the via the web
Product Reviews
(Based on 6 reviews)
Sort reviews:
Viewing Reviews 1 - 3 of 6 |
  • Solid Performer At An Unbeatable Price:

    As reviewed by richard harbaugh on 11/16/2012

    I recently purchased a used Epifani PS-410 bass cabinet for a great price but it had some speaker issues. I changed out all 4 drivers for new Eminence Legend BP102-8 and could not be more pleased. I was looking to get the most bottom end I could as most ten inch speakers don't get very low. The frequency rating for the BP102 is stated from the company as being between 40Hz-2.0kHz. This is definitely a woofer so if your cab doesn't have a horn or you're looking for more high end this may not be the ideal driver for you. However, when mounted into my Epifani cab, even with the horn off, these speakers stay crystal clean but can really get your sound down into the sub-basement realm. Rated at a respectable 200 watts rms, priced well below $100.00 and in the 8+ pound range the Eminence BP102 is ideal for your 4x10 bass cab. Powerful, light weight, superb tone and a price that is hard to beat makes the Eminence BP102 a tremendous value.

    2 of 2 people found this review helpful.
    Was this review helpful?
  • Fairly simple replacement

    As reviewed by Vincent Martinez on 5/23/2011

    Got this driver to replace an identical one in my Goliath Jr III, that had been damaged at a gig on Saturday night. The cost to re-cone is equivalent to replacement (At GC price anyway) so I got the new one shipped in two days (ordered Monday arrived Thursday)put it in and ka-thump, back in effect for Friday night gig! The only issue to point out is that the driver itself took a tiny bit of convincing and positioning to get INTO the cabinet and be very careful how much pressure you apply to the contacts when connecting the leads. It isn't the most sturdy part of the assembly. Other than that though I am glad I went ahead and replaced it and will still send my other one out for re-coning as a backup!

    2 of 2 people found this review helpful.
    Was this review helpful?
  • Great speakers if you like to go low

    As reviewed by Jerry McDougal on 3/12/2013

    Plenty of low end with these puppies. Replaced the stock speakers in my Genz Benz 410T XB cab. MAJOR improvement across the board. A bit less mids than the stock speakers, but nothing that can't be compensated for with a little EQ. Speakers come with front and rear mount gasket rings, so you can install them either way depending on your cab. They look great, sound great, and are a great deal. I play either a Thunderbird 4 string with Chromes or a 5 string ESP J1005 with EMG's and Cobalts through my effects board, and into a Gallien Krueger 700RB with a 700RBII preamp into the Genz Benz 410T XB with these speakers. I'm very happy with my purchase.

    1 of 1 people found this review helpful.
    Was this review helpful?
Questions about the Legend BP102 10 Inch 200W Bass Speaker (660086)

PO Box 4769
Westlake Village, CA 91359
Order #: (if applicable)  * Denotes Required Field
*First Name:
*Last Name:
Click to add file attachment
File Upload 5mb limit