Home > Accessories > Amplifier Parts > Instrument Amp Parts > Speakers > Eminence Legend 1258 Guitar Speaker

Eminence Legend 1258 Guitar Speaker

This Item requires building a kit.
Please start below


Add to Wishlist
GUARANTEED LOWEST PRICE:
$64.99

Includes a Rebate!


Download Rebate PDF


Includes Rebates!

Download Rebates

PREORDER NOTE: We will not charge your credit card until your merchandise ships; however, we will place a temporary hold for the purchase price in order to reserve your item.

In Stock Online

Online Only Item

Free Shipping!

Note: This is a Manufacturer's Refurbished item.

Note: Returns on this item are subject to special conditions

Product Availability
In Stock In Stock On Order On Order Not In Stock Not In Stock
Option/Style Online
Standard
Product Specific Media
Product Specific Media
Product Specs for Eminence Legend 1258 Guitar Speaker

General Media

Pure vintage!

The Eminence Legend 1258 Guitar Speaker has vintage American growl, but with sparkle, definition and edgy top-end. Great for rock and roll, country, and blues. An ideal vintage alnico Jensen replacement.

Eminence recommends the Legend 1258 as a direct replacement in the Basson B412 cabinet, and the Fender FM212R, Fender Blues Reissue, Fender Blues Junior, and the Behringer V-Tone Gmx212 combo amplifiers.

Eminence Legend 1258 Guitar Speaker Specifications:

  • Specifications
  • Nominal Basket Diameter: 12", 304.8mm
  • Nominal Impedance: 8 ohms
  • Power Rating: 75 Watts
  • Resonance: 94Hz
  • Usable Frequency Range: 80Hz-4kHz
  • Sensitivity: 100.1
  • Magnet Weight: 34 oz.
  • Gap Height: 0.312", 7.92mm
  • Voice Coil Diameter: 1.5", 38.1mm
  • Thiele & small parameters
  • Resonant Frequency (fs): 94Hz
  • DC Resistance (Re): 7.44
  • Coil Inductance (Le): 0.70mH
  • Mechanical Q (Qms): 6.15
  • Electromagnetic Q (Qes): 1.18
  • Total Q (Qts): 0.99
  • Compliance Equivalent Volume (Vas): 32.5 liters / 1.2 cu. ft.
  • Peak Diaphragm Displacement Volume (Vd): 24cc
  • Mechanical Compliance of Suspension (Cms): 0.09mm/N
  • BL Product (BL): 10.9 T-M
  • Diaphram Mass inc. Airload (Mms): 32 grams
  • Efficiency Bandwidth Product (EBP): 80
  • Maximum Linear Excursion (Xmax): 0.5mm
  • Surface Area of Cone (Sd): 506.7 cm2

    Mounting information
  • Recommended Enclosure: Sealed (Vented Acceptable)
  • Overall Diameter: 12.03", 305.5mm
  • Baffle Hole Diameter: 10.95", 278.1mm
  • Front Sealing Gasket: fitted as standard
  • Rear Sealing Gasket: fitted as standard
  • Mounting Holes Diameter: 0.25", 6.4mm
  • Mounting Holes B.C. D.: 11.59", 294.3mm
  • Depth: 4.9", 125mm
  • Net Weight: 7.8 lbs., 3.5 kg
  • Shipping Weight: 9.9 lbs., 4.5 kg
  • Materials of construction
  • Coil Construction: Copper voice coil
  • Coil Former: Polyimide former
  • Magnet Composition: Ferrite magnet
  • Core Details: Non-vented core
  • Basket Materials: Pressed steel basket
  • Cone Composition: Paper Cone
  • Cone Edge Composition: Paper cone edge
  • Dustcap Composition: Solid composition paper dust cap

With our 30/30 Guarantee on most products, you can be assured of complete satisfaction and the lowest available price, or your money back!
Voice your opinion! Write a review now »