Skip to main content

Electro-Voice MA-606 6 Channel Mixer/amplifier  

Item #: 
127474179201562514
  • Write a Review

MA-606 The Electro-Voice MA-606 is a 60-watt, six-input mixer amplifier designed for commercial sound applications. It features six separate input controls which can be used to adjust the level from ... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

MA-606

The Electro-Voice MA-606 is a 60-watt, six-input mixer amplifier designed for commercial sound applications. It features six separate input controls which can be used to adjust the level from any of 6 input sources.
Input channels 1-4 are designed to either be used as low-Z balance microphone or line level inputs. The combination connector on inputs 1-4 permits use of either XLR or 1/4" input connectors. A signal appearing at either input 1 will automatically mute the other channels unless the mute function is defeated via a switch on the rear panel.
Inputs 5 and 6 are for auxiliary line-level sources such as tape or CD players. Mono or stereo signals may be applied to inputs 5 or 6. The left and right components of a stereo signal can be applied to the dual RCA phono jacks of these inputs and mixed together to drive the built-in monaural power amplifier. A rear panel paging input with gain control is provided for the paging output of a telephone system. An audio signal appearing at this input automatically mutes all other inputs. A preamplifier output jack and power amplifier input jack permit the mixed output to be fed to an external signal processor (graphic EQ or compressor), and then returned to the built-in amplifier. The preamp output may be used to drive an additional power amp with its own set of speakers without interrupting the function of the built-in amplifier.
There is also a 24v dc power option to operate the unit off of a 24v emergency power source. The speaker output is available at a barrier strip, which includes terminals for driving low impedance loudspeaker loads, as well as 25, 70.7 or 100 volt distributed systems.

Specifications
    • Auxiliary: 100 mV to 1 V/ (balanced)
    • Dimensions (H x W x D): 13.3 cm (5.2 in) x 48.0 cm (18.9 in) x 32.0 cm (12.6 in)
    • Frequency Response: 50 Hz - 15 kHz, ±3 dB
    • Input Sensitivity/Impedance, 1-4 Line setting: 75 mV/47 kohm (balanced)
    • Input Sensitivity/Impedance, Inputs 1-4 Mic setting: 0.3 mV/600 ohm (balanced)
    • Line Output Leve/Impendance, Balanced Line Output: 500 mV/47 kohm (unbalanced)
    • Line Output Leve/Impendance, Preamp Output: 1 V/1 kohm (unbalanced)
    • Line Output Leve/Impendance, Speaker Outputs : 4, 8, 16 ohm, 25, 70.7 70.7 and 100-Volt
    • Net Weight: 8.5 kg (19.0 lb)
    • Paging : -20 dBm/600 ohm (transformer isolated)
    • Power Amp In: 1 V/10 kohm (unbalanced)
    • Power Dissipation: 250 Watts
    • Power Output (@ 1 kHz): 60 Watts
    • Power Supply: 108 - 132 V ac, 50/60 Hz
    • Protection: 3 independent Slo-Blo fuses, primary ac and dc
    • 65 dB
    • 52 dB
    • 65 dB
    • 90 dB
    • Tone Controls, Bass: ±10 dB at 100 Hz
    • Tone Controls, Mutiung: 40 dB attentuation
Warranty
MANUFACTURER'S WARRANTY
Microphones: 3 year full replacement
Wireless: 2 years
Speakers: 3 years active, 5 years passive


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.