Get more wireless for your money with this complete setup.

View all items from this brand

The Electro-Voice R300 Headworn Wireless System in case is a complete wireless setup that includes everything you need to communicate or perform with complete freedom. The convenient case contains the following components:
•
The R300 Receiver
•
The EV Headset Microphone
•
The BP-300 Body Pack Transmitter

R300 Receiver
Equipped with a range of unique, world-tour-proven features, the R300 brings state-of-the-art EV wireless microphone engineering to an unprecedented price point – more professional wireless performance for less.

With a sleek, low-profile design and durable construction, the R300 receiver system is equally at home on a table top or in a 19-inch equipment rack. Its simple controls and easy-to-read display are designed to provide the ultimate in user-friendly operation. Rack-mount kits and front-mount antenna cables are available for professional installation. For applications with up to four receivers in one rack, the APD4+ antenna splitter can provide antenna and power feeds.

The EV Headset Microphone

BP-300 Bodypack
The all-new BP-300 metal bodypack transmitter is rugged, compact, and easy to use. Using two AA batteries for 14 hours of use, the BP-300 is one of the most economical transmitters available for day-to-day operation. The unit's mute function keeps the RF signal live while muting the audio, protecting your channel and preventing noise in the audio system. Two preconfigured bodypack systems are available, with either a lapel or a headworn microphone. The bodypack's TA4 connector allows the unit to be used with other Electro-Voice lapel or headworn microphones.

ClearScan
Proven at the highest level of touring and trusted in thousands of installations around the world, Electro-Voice's industry-leading ClearScan system scans through the R300's 32 preset channels and selects the clearest channel – all with the touch of a single button. In an increasingly challenging RF world, ClearScan gives you the confidence to go wireless without worry, ensuring noise-free operation and the longest operating range.

EZsync
Matching the R300's transmitter and receiver frequencies is also as simple as the touch of a button. EZsync uses infrared technology to set the transmitter to the correct frequency, confirming operation in one automatic step. Error-free wireless setup has never been easier.

Electro-Voice R300 Headworn Wireless System in Case Features:

ClearScan – find the clearest channel available with the touch of one button
EZsync – infrared channel transfer from receiver
to transmitter for easy, error-free setup
EV Headset microphone element for crisp, clear vocals
14-hour battery life from two AA alkaline batteries

Electro-Voice R300 Headworn Wireless System in Case Specifications:

R300 Receiver
Receiver Type: Synthesized PLL

Frequency Range (RF):
A Band 618 - 634MHz
B Band 678 - 694MHz
E Band 850 - 865 MHz

Number of Channels: 32

Modulation: +/- 40 kHz

Diversity: Antenna

RF Sensitivity: < 1.0 µV for 12 dB SINAD

Image Rejection: > 55dB

Squelch: Tone Code plus Amplitude

FCC Certification: Approved under Part 15

Power Requirements: 12 - 16 VDC, 500mA max

Operating Temperature: 5º to 45º C (41º to 113º F)

Dimensions:
1.72" H x 7.8" W x 8.0" D
43mm H x 206mm W x 210mm D

Audio Parameters
Frequency Response: 80 – 18kHz +/- 2dB
Balanced Output: -20 dBV (max @ 40 kHz deviation)
Unbalanced Output: adjustable 8 mV to 0.755V RMS
Distortion: <1.0%, 0.4% typical (ref 1kHz, 40kHz deviation)
Signal-to-Noise Ratio: >100dB A Weighted
Dynamic Range: >95dB

Transmitters BP-300/strong>
Radiated Output: 8 mW typical

TA4F Connector Wiring:
Pin 1: Ground; Pin 2 Mic Input; Pin 3: +5V bias; Pin 4: N/C

Power Requirements: Two AA Batteries

Battery Life (Typical): > 14 hours with AA Alkaline Typical

Bodypack Antenna: Flexible external 1/4" wave

Dimensions (Bodypack):
3.3 in. H x 2.6 in. W x 0.89 in. D
84 mm H x 66 mm W x 23 mm D