The E-MU PIPEline wireless transmitter and receiver system frees you from the tyranny of audio cables without sacrificing audio quality. E-MU PIPEline works as a wireless transceiver for your guitar o... Click To Read More About This Product
Find a similar product below or contact us for a recommendation of a great alternative.
Call: 866-498-7882 Email
The E-MU PIPEline wireless transmitter and receiver system frees you from the tyranny of audio cables without sacrificing audio quality. E-MU PIPEline works as a wireless transceiver for your guitar or keyboard, or as the basis of a wireless in-ear monitoring system for your band. Because latency is so critical in music performance, PIPEline has a minimal delay of only 5.5ms, so it won't interfere with the feel of your music.
With E-MU PIPEline connected to your musical instrument, you'll be able to move freely in a 15 meter range from the receiver. If your other band mates want to join the wireless revolution, they can, because PIPEline has 3 independent stereo channels. Each instrument stays completely independent with zero crosstalk.
Have you always wanted an in-ear monitoring system, but couldn't justify the high price? E-MU PIPEline is the perfect solution for low-cost in-ear monitoring. Because PIPEline has 3 channels, you can have 3 separate stereo monitor mixes, or 1 transmitter can send a group mix to multiple receivers.
PIPEline's Audio quality is superb with no-compression and a 48kHz sample rate (better than CD). Encryption key handshaking between transmitter and receiver eliminates the possibility of picking up other wireless sources.
Because E-MU PIPEline works with any audio device, you can wirelessly connect any of your other audio gear. For example, use PIPEline to connect your iPod or MP3 player”or computer”to your stereo system, or put remote speakers in another room of your house without the hassle of routing speaker wires!
Mobile wireless transmit or receive
Each Pipeline can be configured as a transmitter or receiver
Better than CD Quality Digital Audio
15M (49ft) range:
Rechargeable battery Lasts up to 10 hours in receive mode and 6 hours in transmit mode
Analog/Digital inputs or outputs
Two RCA Flexi-Jacks can be configured either as inputs or outputs
The two RCA Flexi-Jacks can also be configured either as analog or digital (S/PDIF 48kHz)
Audio Line In/Out ” 3.5mm (1/8") stereo jack
S/PDIF 48kHz or RCA Audio Line In/Out
Frequency Response: 20Hz-20kHz +/- 0.15dB
Signal-to-Noise Ratio: (SNR) 98dB (typical)
Latency: 5.5ms in Dedicated Pairing Mode, 10ms in Broadcast Mode
Battery Life: 5 to 8 hours (typical)
Charge Time: 3 hours (typical)
Supply Voltage: 5V
Operating RF range: 2400 - 2483.5MHz
Number of RF channels: 3
RF transmitter power output: 16 dBm (typical)
Minimum System Requirements
AC Power 100/240V
(2) PIPElines are required (transmitter & receiver) or
(1) LONGboard/SHORTboard (with built-in PIPEline transmitter) and (1) PIPEline
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.