E-Mu 1616M PCIe Digital Audio System Features:

Mastering grade 24-bit/192kHz converters
Hardware-accelerated effects
PatchMix DSP zero-latency hardware mixing and monitoring
Comprehensive analog and digital I/O plus MIDI
Two E-MU XTC Class-A, ultra-low noise preamps (-129.5dBu)
Compatibility with most popular audio/sequencer applications
E-MU Production Tools Software Bundle

I/O Configuration:
Two E-MU XTC Ultra-low Noise Mic/Line/Hi-Z Preamps with Soft Limiter and 48V Phantom Power (-129.5dBu EIN)
Four ¼" Balanced Inputs
Six ¼" Balanced Outputs
Turntable Input (w/ground lug and hardware RIAA preamp)
24-bit/192kHz ADAT In/Out (switchable to S/PDIF)
24-bit/192kHz coaxial S/PDIF Out (switchable to AES/EBU)
Two sets of MIDI In/Out
Stereo 1/8" Speaker Outputs (configurable from stereo to 5.1)
Stereo Headphone Output

E-Mu 1616M PCIe Digital Audio System Specifications:

Minimum System Requirements
Intel or AMD processor - 1 GHz or faster
Intel, AMD or 100% compatible motherboard & chipset
Microsoft Windows XP (SP 2) or Windows XP x64
256MB System RAM
900MB of free hard disk space for full installation
PCI 2.1 compliant slot for E-MU 1010 PCI card
CD-ROM/CD-RW or DVD-ROM drive required for software installation
XVGA Video (1024 X 768)

General
Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192kHz from internal crystal or externally supplied clock (no sample rate conversion)
Bit Depths: 24 bit I/O, 32 bit processing

PCIe Specification:
PCIe Base Specification 1.1 Compliant
Form Factor: Universal-keyed PCIe x1 Card
3.3V I/O
PCIe Bus-Mastering subsystem reduces CPU usage

E-MU E-DSP 32-bit DSP with 67-bit accumulator (double precision w/ 3 headroom bits)
Hardware-accelerated, 32-channel mixing, and multi-effects processing
Zero-latency direct hardware monitoring w/effects
ASIO2, WDM/MME/DirectSound, x64 Drivers
EDI (E-MU Digital Interface) proprietary 64-channel audio link over CAT-5 cable
Anti-Pop speaker protection minimizes noise during power on/off
Ultra-low jitter clock subsystem: < 1ns in PLL mode (44.1kHz, Opt. S/PDIF Sync)

Analog Line Inputs (4)
Type: servo-balanced, DC-coupled, low-noise input circuitry
A/D converter: AK5394A Level (software selectable):
Professional: +4dBu nominal, 20dBu max (balanced)
Consumer: -10dBV nominal, 6dBV max (unbalanced)
Frequency Response (20Hz-20kHz): +0.0/-.03dB Dynamic Range (1kHz, A-weighted): 120dB Signal-to-Noise Ratio (A-weighted): 120dB THD+N (1kHz at -1dBFS): -110dB (.0003%) Stereo Crosstalk (1kHz at -1dBFS): < -120dB Analog Line Outputs (6)

Analog Line Outputs (6)
Type: balanced, AC-coupled, 2-pole low-pass differential filter
D/A converter: CS4398 Level (software selectable):
Professional: +4dBu nominal, 20dBu max (balanced)
Consumer: -10dBV nominal, 6dBV max (unbalanced)
Frequency Response (20Hz - 20kHz): 0.0/-.06dB Dynamic Range (1kHz, A-weighted): 120dB Signal-to-Noise Ratio (A-weighted): 120dB THD+N (1kHz at -1dBFS): -105dB (.0006%)
Stereo Crosstalk (1kHz at -1dBFS): < -115dB

Combo Microphone Preamplifier/Hi-Z/Line Inputs (2)
Type: E-MU XTC combo mic preamp and Hi-Z/line input w/ Soft Limiter
Gain Range: +60dB
Frequency Response (min gain, 20Hz-20kHz): +0.0/-0.1dB
Stereo Crosstalk (1kHz min gain, -1dBFS): < -125dB Hi-Z Line Input:
Input Impedance: 1Mohm
Max Level: +18dBV (20.2dBu)
Dynamic Range (A-weighted, 1kHz, min gain): 118dB
Signal-to-Noise Ratio (A-weighted, min gain): 118dB
THD+N (1kHz at -1dBFS, min gain): -105dB (.0006%)
Microphone Preamplifier:
Input Impedance: 1.5Kohms
Max Level: +6dBV (+8.2dBu)
EIN (20Hz-20kHz, 150ohm, unweighted): -129.5dBu
Signal-to-Noise Ratio (A-weighted, min gain): 119dB
THD+N (1kHz at -1dBFS, min gain): -110dB (.0003%)
Phantom Power: 48V
Soft Limiter: 5dB max compression (software selectable)

Headphone Amplifier
Type: linear power amplifier
D/A converter: CS4398
Gain Range: 85dB
Maximum Output Power: 50mW
Output Impedance: 22ohms
Frequency Response (20Hz-20kHz): +0.0/-0.07dB
Dynamic Range (A-weighted): 118.5dB
Signal-to-Noise Ratio (A-weighted): 118dB
THD+N (1kHz, max gain): 600ohm load: -96dB
Stereo Crosstalk (1kHz at -1dBFS, 600 ohm load): < -100dB

Phono Input (stereo)
Type: RIAA equalized phono input
Maximum level:
Professional: 60mV RMS
Consumer: 15mV RMS
Input Impedance: 47Kohm
Frequency Response (20Hz - 20kHz): +0.1/-0.3dB
Dynamic Range (A-weighted): 96dB
Signal-to-Noise Ratio (15mV RMS unbal input, A-weighted): 96dB
THD+N (1kHz, 15mV RMS input): -90dB (.003%)
Stereo Crosstalk (1kHz at -1dBFS): < -80dB

Digital I/O
S/PDIF:
2 in/2 out coaxial (transformer coupled)
2 in/2 out optical (software switched with ADAT)
AES/EBU or S/PDIF format (software selectable)
ADAT:
8 channels, 24-bit @ 44.1/48kHz
4 channels, 24-bit @ 88.2/96kHz (S-MUX compatible)
2 channels, 24-bit @ 176.4/192kHz
MIDI
2 in, 2 out

Synchronization
Internal crystal sync at 44.1, 48, 88.2, 96, 176.4, 192kHz
External sample rate sync via
ADAT (44.1 - 192kHz)
Optical S/PDIF (44.1 - 96kHz)
Coaxial S/PDIF (44.1 - 192kHz)
SMPTE/LTC/MTC (via optional Sync Daughtercard)
24, 25, 30 drop-frame, 30 non-drop
SMPTE to MTC, MTC to SMPTE Conversion
SMPTE Striping
Flywheel/Jam/Regenerate


Retail Box Contents
E-MU 1010 PCI Card
E-MU MicroDock M
EDI (E-MU Digital Interface) cable (3 meters)
Universal power adaptor
MIDI breakout cable
Quick Start installation guide

E-MU Digital Audio Systems CD-ROM
– Windows XP and XP x64 Drivers
– E-MU PatchMix DSP
– E-MU Power FX
– E-MU E-DSP Effects Library - Owner's Manual and Tutorials

E-MU Production Tools Software Bundle CD-ROM
– Cakewalk SONAR LE
– Steinberg Cubase LE
– Ableton Live Lite 4 for E-MU
– Steinberg Wavelab Lite
– IK Multimedia AmpliTube LE
– IK Multimedia T-RackS EQ
– Minnetonka diskWelder BRONZE
– SFX Machine LT
– E-MU Proteus X LE (over 1000 sounds included)

E-Mu 1616M PCIe Digital Audio System

One year parts and labor warranty.

Get your gear covered!

Now you can get added warranty protection for your new gear. Pro Coverage steps in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program offers you UPGRADED COVERAGE if your product ever fails!

Pro Coverage includes:

• Accidental damage protection (new gear only)
• Expedited Repair
• Free Shipping (for returns or repairs)
• 100% Coverage for Commercial Use
• Extended Return Period
• Extended Price Protection
• No Lemon Guarantee
• Free Transfer of Coverage to a new owner
• Repair Costs Covered for up to 3 years from date of purchase
• Repairs Can Be Authorized Toll-Free by Phone or the via the web