Dynaudio Acoustics

collapse expand iconDescription

From dubstep to metal, today's bass-dependent music requires a studio subwoofer for monitoring. The Dynaudio BM149S delivers the punch and woof that will inform your low-end mix decisions. Dynaudio is one of the truly venerated names in professional studio monitoring.

The Dynaudio tradition continues in the new II-series subs, delivering Dynaudio's premium, professional sound quality and performance. Dynaudio Professional II-series precision subwoofers are made in Denmark using hand-crafted drivers that have made Dynaudio the industry standard in studios the world over.

The BM14S II is a precision subwoofer specifically designed to complement BM6 mkIII and BM12 mkIII monitors, adding extended bass in mid-sized mixing and recording environments, however it is also a logical addition to any monitoring system.
Dynaudio Acoustics BM14S II Studio Sub (EA)
Dynaudio Acoustics BM14S II Studio Sub (EA)
Dynaudio Acoustics BM14S II Studio Sub (EA)

collapse expand iconFeatures

12" woofer with pure aluminum voice coil. 300W @ 4 ohm
Phase adjustment in 0 / 180; Auto on/off, power LED;
Selectable LFE or slave mode
Discrete LFE input, slave output for linking
Seamless adjustment of low-pass corner frequencies
SAT/SUB high-pass adjustment: Flat, 60 Hz, 80 Hz.
Closed cabinet for extremely precise low frequency reproduction

collapse expand iconSpecs

Model:BM14S II
System:Precision Subwoofer
Frequency Response:18 Hz to 250 Hz (+/-3 dB)
Inputs: LFE/Slave, SAT/SUB, XLR right/left full bandwidth
XLR Input impedance: + branch 20 kOhm, - branch 10 kOhm
Sensitivity: 75 mVRMS to 5 VRMS, adjustable
Max. Input voltage:10 VRMS
Outputs: Slave, SAT/SUB, XLR right/left, High-pass filtered
XLR Output impedance:100 Ohm (each branch)
XLR Pin-out: 1: 0 / 2: + / 3: -
Mode selector: LFE, Slave (Phase and volume controls are bypassed in slave mode
Phase adjustment: 0 - 180
SAT High-pass: Flat, 60 Hz, 80 Hz
SUB Low-pass: 50 Hz to 150 Hz
Auto ON/OFF: Automatic ON (LED green) when signal is detected at input Automatic mute (LED red) when no signal is detected for 15 to 20 min.
Amplifier power: 200 W, 4 Ohm
Power consumption: <16 W Standby, 325 W Max.
Woofer: 300 mm/12", One piece molded MSP cone (Magnesium Silicate Polymer), 100 mm/4", Pure aluminum voice coil
Weight: 21 kg. / 46.3 lbs
Dimensions (WxHxL): 350 x 350 x 369.5 / 13.8" x 13.8" x 14.5"
(Specs can change without notice)