Drawmer TS1/DC1 Tube Station Audio Processor  

Item #: 
12747416272997998
  • Write a Review

The Tube Station 1 (TS1) offers a wide dynamic range Class A mic/instrument pre-amp which can be assigned either to the onboard stereo tube compressor or alternatively to an external destination via i... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The Tube Station 1 (TS1) offers a wide dynamic range Class A mic/instrument pre-amp which can be assigned either to the onboard stereo tube compressor or alternatively to an external destination via its own dedicated output. The compressor can be accessed independently via its own inputs for warming and fattening stereo mixes.

In addition to a variable high-pass control, the mic pre-amp features an HF contour control which offers high frequency enhancement to add presence and clarity to the human voice and acoustic instruments. A variable Tube Drive control allows user-definable amounts of saturation. The TS1 offers digital outputs on SPDIF or AES/EBU at up to 24 bit resolution and 96K sample rate. Simultaneous analogue outputs are available on balanced XLR.

Features
  • Mic/Line Pre-Amp
  • 60dB of gain
  • Clip LED
  • Variable high-pass 25Hz-250Hz
  • Output 1/4 inch jack (unbalanced)
  • Instrument input 1/4 inch Jack
  • 48V phantom power
  • Phase reverse
  • HF contour
  • Send/return insert point
  • Mic input XLR balanced
  • COMPRESSOR
  • Stereo Tube soft-knee compressor
  • Variable attack and release controls
  • Variable Tube Drive
  • Fixed threshold limiter
  • 8 segment gain reduction bargraph
  • Twin 8 segment left/right - input/output_bargraph
  • Single 'more compress' control for ease of use
  • Gain trim
  • Analogue output level (does not_affect digital out)
  • Side chain access
  • DC1 DIGITAL OUTPUT MODULE
  • 24 bit resolution
  • 44.1K, 48K, 88.2K, 96K sample rates
  • SPDIF or AES/EBU outputs
  • Word clock In with auto high sample rate sensing
Specifications
  • TS1
    (Measurements taken using +4dBu balanced input where applicable)
    ANALOGUE
    INPUT IMPEDANCE - LINE 20KS (bal)
    - INSTR 1MS
    MAXIMUM INPUT LEVEL +21dBu
    LINE INPUT CMR Better than !40dB (20Hz - 22KHz)
    MIC INPUT NOISE !130dB @ +60dB gain with 150S load (ref 0dBu)
    OUTPUT IMPEDANCE 100S
    MAXIMUM OUTPUT LEVEL +20dBu
    BANDWIDTH 12Hz to 52KHz (!1dB)
    NOISE (ref +4dBu) !87dB (22Hz - 22KHz)
    DISTORTION
    Typical Input 100Hz 1KHz 10KHz
    Unity Gain < 0.03% < 0.03% <0.03%
    POWER REQUIREMENTS 115Volt or 230Volt at 50-60Hz, 15VA
    FUSE RATING T160mA for 230Volt, T315mA for 115Volt
    CONFORMING TO IEC127-2
    FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt working
    CASE SIZE 482mm (w) x 44mm (h) x 228mm (d)
    WEIGHT (incl packaging) 4.3 Kg

    DIGITAL MODULE
    THD and NOISE >105dB Unweighted
    >108dB A- Weighted
    MAXIMUM INPUT LEVEL +21dBu = 0dBfs
  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.