DPA Microphones d:dictate ST4011C Stereo Pair with 4011C Compact Cardioids
Write a Review
Whenever a small, lightweight, inconspicuous microphone for top-quality sound is required, the compact design and uniform unidirectional response of the d:dictate 4011C makes it the perfect choice. Th... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
Whenever a small, lightweight, inconspicuous microphone for top-quality sound is required, the compact design and uniform unidirectional response of the d:dictate 4011C makes it the perfect choice. They are particularly popular as spot mics for classical recording and on-stage close mics for live sound.
The DPA ST4011C is a complete DPA 4011C Stereo Pair with two carefully factory-matched first order cardioid microphones. Even though the standard tolerances on DPA Reference Standards are extremely low, a stereo match is even closer. The specially selected DPA 4011C microphones are matched within ±1 dB on both frequency response and sensitivity.
The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.
Excellent for both PA/Live and recording Carefully matched within ± 1 dB Low profile mounting options Peli Case transportation and protection
Directional pattern: Cardioid Principle of operation: Pressure gradient Cartridge type: Pre-polarized condenser Frequency range: 20 Hz - 20 kHz Frequency range, ± 2 dB, at 30 cm: 40 Hz - 20 kHz Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa Equivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A)) Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 76 dB(A) Total Harmonic Distortion (THD): < 1 % up to 139 dB SPL peak Dynamic range: Typ. 121 dB Max. SPL, peak before clipping: 152 dB Output impedance: < 200 ohm Minimum load impedance: 2 kohm Cable drive capability: 100 m (328 ft) Output balance principle: Impedance balancing with Active Drive Common Mode Rejection Ratio (CMRR): > 50 dB Power supply (for full specifications): 48 V Phantom power (± 4 V) Current consumption: 2.8 mA Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase Color: Matte black Weight: 58 g (2 oz) Microphone diameter: 19 mm (0.75 in) Capsule diameter: 19 mm (0.75 in) Microphone length: 64 mm (2.5 in) Output voltage, RMS: > 4 V Polarity: +V at pin 2 for positive sound pressure Temperature range: -40 °C to 45 °C (-40 °F to 113 °F) Relative Humidity (RH): Up to 90% Matching tolerance: ± 1 dB Phase deviation for kit: < 10°