DPA Microphones ST2011C Stereo Pair with 2011C Compact Cardioids
Write a Review
The DPA ST2011C features two carefully matched 2011C cardioid microphones, a sturdy PeliTM case, mic holders, grids and windscreens. This Stereo Pair of handpicked cardioid microphones are selected on... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The DPA ST2011C features two carefully matched 2011C cardioid microphones, a sturdy PeliTM case, mic holders, grids and windscreens. This Stereo Pair of handpicked cardioid microphones are selected on sensitivity within ±1.5 dB, which makes stereo principles such as XY and ORTF easy to orchestrate. The compact design and controlled directionality of the 2011C make this perfect pair an excellent choice for spot mics for classical recording and on-stage close mics for live sound. The foam design in the heavy-duty Peli transportation box allows for fast and easy exchange of microphone/accessory inlays. Peli Case for quality transportation and protection.
Frequency response: 20Hz to 20kHz
Max SPL: 146 dB
Pattern and type
Applications: Studio, stage, theatrical
Phantom power required: Yes
Size and weight
Weight: 2.3 oz.
Case: Hard case
Clip: Hard rubber
Directional pattern: Cardioid Principle of operation: Pressure gradient, with interference tube Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule Frequency range: 20 Hz - 20 kHz Frequency range, ± 2 dB, at 30 cm: 50 Hz - 17 kHz with 3 dB soft boost at 12 kHz Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa Equivalent noise level, A-weighted: Typ. 20 dB(A) re. 20 Pa (max. 23 dB(A)) Equivalent noise level, ITU-R BS.468-4: Typ. 33 dB (max. 36 dB) S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 74 dB(A) Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 137 dB SPL peak Dynamic range: Typ. 117 dB Max. SPL, peak before clipping: 146 dB Minimum load impedance: 2 kohm Output impedance: < 200 ohm Cable drive capability: 100 m (328 ft) Output balance principle: Impedance balancing with Active Drive Common Mode Rejection Ratio (CMRR): > 50 dB Power supply (for full specifications): 48 V Phantom power (± 4 V) Current consumption: 2.8 mA Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase Color: Matte black Weight: 64 g (2.3 oz) Microphone diameter: 19 mm (0.75 in) Microphone length: 92 mm (3.6 in) Output voltage, RMS: > 4 V Polarity: +V at pin 2 for positive sound pressure Temperature range: -40 C to 45 C (-40 F to 113 F) Relative Humidity (RH): Up to 90% Sensitivity selection tolerance (at 1 kHz): ± 1.5 dB
You are changing the Ship-To country.
Our product catalog varies by country due to manufacturer
restrictions. If you change the Ship-To country, some or
all of the items in your cart may not ship to the