Crown XLS 402D Power Amplifier  

Item #: 
127474181798471612
  • Write a Review

450W/ch @ 4 ohms, 300W/ch @ 8 ohms, 900W bridged mono @ 8 ohms. Designed to provide the quality, power, and reliability you expect from other Crown amps with many of the same controls and features for... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

450W/ch @ 4 ohms, 300W/ch @ 8 ohms, 900W bridged mono @ 8 ohms. Designed to provide the quality, power, and reliability you expect from other Crown amps with many of the same controls and features for a much friendlier price.

Features sophisticated protection circuitry (from shorted, open, or mismatched loads, input and high frequency overloads), 5-way fault indicator, red LED on each channel that turns on when distortion becomes audible, green signal-present LED that flashes when the level is extremely low (indicating cabling problems), and detented level controls. Mode select switch for stereo or bridged; 3-speed fan; and electronically balanced XLR inputs; touchproof binding post and Speakon outputs; all in a rugged steel chassis designed to handle serious road use.

Features
  • Features sophisticated protection circuitry
  • 5-way fault indicator
  • Red peak clip LED on each channel
  • Green signal-present LED that flashes when the level is extremely low
  • Detented level controls
  • Mode select switch for stereo or bridged
  • 3-speed fan
  • Electronically balanced XLR inputs
  • Touchproof binding post and Speakon outputs
  • All in a rugged steel chassis designed to handle serious road use
Specifications
  • Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25V
    Frequency Response (at 1 watt) 22Hz to 20kHz: +0 dB, ”0.8dB
    Signal-to-Noise Ratio (20Hz to 20kHz) A-weighted, below rated power: >98dB. No weighting, below rated power: >93dB.
    Total Harmonic Distortion (THD): <0.5%.
    Intermodulation Distortion (IMD): (60Hz and 7kHz at 4:1) from full rated output to ”40dB: < 0.3%.
    Damping Factor (8 ohm) 10Hz to 400Hz: >200.
    Crosstalk (below rated power)_at 1kHz: ”76dB at 20kHz: ”58dB
    Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced.
    Load Impedance: Rated for 4 to 8 ohms per channel in Stereo, 8 ohms in Bridge Mono
    AC Line Voltage and Frequency Configurations Available (±10%): 120 VAC 60Hz, 100 VAC 50/60Hz, 220 VAC 50Hz, and 230-240 VAC
    Weight: 29lb.
Warranty
MANUFACTURER'S WARRANTY
3 year, no-fault parts and labor warranty on amps.
3 year warranty for most mics.
1 year warranty for Soundgrabber mic.
Crown Extended Warranty available as an option.


  • Customer Reviews
Loading....

Review Snapshot

by PowerReviews
 
4.8

(based on 4 reviews)

Ratings Distribution

  • 5 Stars

     

    (3)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 4 customers

Displaying reviews 1-4

Back to Top

(2 of 3 customers found this review helpful)

 
4.0

House Killa

By Mighty O.C.

from Orange County, N.Y.

I'm running a pair of 15" mids in my tri-amped rig and the 402D keeps them crisp and clean even at high dbs. "House" heads require clean highs to be heard over a very punchy bassline. That's no easy feat when you're running 4-"18s" in mono. The 402D is highly recommended for those who want quality sound on a tight budget. Fan noise is the only brawback.

(5 of 6 customers found this review helpful)

 
5.0

Crown XLS 402D

By CDOG

from bolinas, CA

The Crown XLS 402D powers my two 15's with horns in my practice studio. They are solid clean, quite except for the fans and most of all powerful.Good connectivity in back for a versatile array of hook-ups.Solid and not too pricey $$, thanks Crown!

(13 of 14 customers found this review helpful)

 
5.0

best amp I've used

By amp king

from San Jose, CA

I've used this amp to power a pair of JBL 15" speakers, and the sound was amazing. This amp runs very cool, it rarely gets warm. The sound is very precise with very little distortion. At 300 watts per channel at 8ohms, this amp has plenty of power for most speakers.

(6 of 7 customers found this review helpful)

 
5.0

A TRUE WORKHORSE

By frequency09

from Inver Grove Heights, MN

This amp is as solid as they come. I decided to give this one a try over my usual pick. I was rather impressed with the quality of this amp. At high levels this amp really performs. Doesn't stress out period. Certainly A True Workhorse. At very low levels the fans are a bit loud. But good to know they really keep the amp cooool. The dollar/watt ratio makes this a great value.

Displaying reviews 1-4

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.