Skip to main content

Crown X1000 Stereo 2x300W Power Amp

Item #: 
1344558291534725226
  • Write a Review

The X Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musici... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The X Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference. The Crown X1000 has an output of 300W per side at 4 ohms.

With more than six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. Check out the affordable Crown X Series.

FEATURES

  • Stereo/parallel/bridge-mono mode
  • User selectable input sensitivity - 0.775V and 1.4V
  • Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
  • Efficient forced-air cooling prevents excessive thermal buildup
  • Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
  • Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
  • Protection against shorts, no-load, on/off thumps and radio-frequency interference
SPECIFICATIONS
  • Guaranteed Minimum Power: 300W (per channel) @ 4 ohms / 200W (per channel) @ 8 ohms / 600W bridge mono @ 8 ohms
  • Frequency Response (at 1 Watt): 20Hz - 20kHz, +0/-1dB
  • Total Harmonic Distortion (THD): < 0.5%, 20 Hz - 20 kHz
  • Intermodulation Distortion (IMD) 60Hz and 7kHz at 4:1, from full rated output
  • to “30 dB: 0.35%
  • Slew Rate: >10V/us
  • Voltage Gain: 29dB 31dB 33dB 36dB
  • Damping Factor (8 ), 10Hz - 400Hz > 200
  • Signal-to-Noise Ratio: (below rated power,
  • 20 Hz to 20 kHz, A-weighted): > 100dB
  • Crosstalk (below rated power)
  • At 1 kHz: “75dB
  • At 20 kHz: “59dB
  • Input Sensitivity for full rated power at 8 ohms 0.775V or 1.4V
  • Input Impedance (nominal)
  • Balanced: 20 kOhms
  • Unbalanced: 10 kOhms
  • Connectors, Controls and Indicators
  • Input Connectors: One balanced XLR and one unbalanced RCA per channel
  • Output Connectors: (Speaker Connectors) 4-POLE Speakon and one pair Binding Post per channel
  • Front Panel Controls: Power on/off switch, one gain control per channel
  • Rear Panel Controls Output mode switch: stereo (dual), parallel or bridge
  • Input sensitivity switch: 0.775V or 1.4V
  • Power Indicator: One blue LED
  • Signal Indicator: One green LED per channel
  • Clip (peak) Indicator: One yellow LED per channel
  • Fault Indicator: One red LED per channel
  • Construction
  • Protection: Protection against short circuits, no-load, on/off muting,
  • RF interference. Stable into reactive or mismatched loads
  • Ventilation: Flow-through ventilation from front to back
  • Cooling: Internal heat sinks with forced air. Fan cooled,
  • speed regulated, thermal protection
Pro Coverage
MANUFACTURER'S WARRANTY
3 year, no-fault parts and labor warranty on amps.
3 year warranty for most mics.
1 year warranty for Soundgrabber mic.
Crown Extended Warranty available as an option.


  • Customer Reviews
Loading....

Review Snapshot

by PowerReviews
CrownX1000 Stereo 2x300W Power Amp
 
4.0

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 3 customers

Displaying reviews 1-3

Back to Top

(2 of 2 customers found this review helpful)

 
5.0

Power to spare!

By Charles

from Hotlanta GA

Comments about Crown X1000 Stereo 2x300W Power Amp:

What a great surprise and especially at this price! (I got it on sale for $99.99) Nothing complicated here, just sheer power! I'm using this to power two 15" with horn KUSTOM KPC15M's. At quarter power they nearly blow you out of the room! My ears were nearly bleeding at half power! I just got these yesterday so I cannot speak to durability but it's a CROWN! It would be nice if it had a 1/4" output option but that was cured easily enough with two speakon to 1/4" adapters.

(2 of 2 customers found this review helpful)

 
4.0

First Impressions...GOOD

By John

from Live free or die state

Comments about Crown X1000 Stereo 2x300W Power Amp:

I just received this unit today. My first impression is that it is solidly built. Be aware that you will need to buy cables/adapters to use this with a preamp; in my case a Rocktron Prophesy 2. You will need two XLR to 1/4" male for the input, and you will need two Speakon to 1/4" mail adaptors for the output. I am using mine with the Marshall MG250DFX, and using the combo only for the 2X12 speakers. You will also need to get two 1/4" to 1/4" female to female adaptors, as the MG250DFX pseaker cables have a male connector, and the power amp out has a male 1/4" adapter as well. I'll update when I've had a chance to play with it. Hope this helps someone.

 
3.0

Classic Ceown.

By JB

from undisclosed

See all my reviews

Verified Buyer

Comments about Crown X1000 Stereo 2x300W Power Amp:

Wow, I forgot how heavy old amps are. Classic Crown though, clean and strong, just heavy.

Displaying reviews 1-3

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.