Crown X1000 Stereo 2x300W Power Amp 888365234502

Item #: 
H88830005000009
  • Write a Review

The X Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musici... Read More

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The X Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference. The Crown X1000 has an output of 300W per side at 4 ohms.

With more than six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. Check out the affordable Crown X Series.

Features
  • Stereo/parallel/bridge-mono mode
  • User selectable input sensitivity - 0.775V and 1.4V
  • Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
  • Efficient forced-air cooling prevents excessive thermal buildup
  • Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
  • Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
  • Protection against shorts, no-load, on/off thumps and radio-frequency interference
Specifications
  • Guaranteed Minimum Power: 300W (per channel) @ 4 ohms / 200W (per channel) @ 8 ohms / 600W bridge mono @ 8 ohms
    Frequency Response (at 1 Watt): 20Hz - 20kHz, +0/-1dB
    Total Harmonic Distortion (THD): < 0.5%, 20 Hz - 20 kHz
    Intermodulation Distortion (IMD) 60Hz and 7kHz at 4:1, from full rated output
    to “30 dB: 0.35%
    Slew Rate: >10V/us
    Voltage Gain: 29dB 31dB 33dB 36dB
    Damping Factor (8 ), 10Hz - 400Hz > 200
    Signal-to-Noise Ratio: (below rated power,
    20 Hz to 20 kHz, A-weighted): > 100dB
    Crosstalk (below rated power)
    At 1 kHz: “75dB
    At 20 kHz: “59dB
    Input Sensitivity for full rated power at 8 ohms 0.775V or 1.4V
    Input Impedance (nominal)
    Balanced: 20 kOhms
    Unbalanced: 10 kOhms

    Connectors, Controls and Indicators
    Input Connectors: One balanced XLR and one unbalanced RCA per channel
    Output Connectors: (Speaker Connectors) 4-POLE Speakon and one pair Binding Post per channel
    Front Panel Controls: Power on/off switch, one gain control per channel
    Rear Panel Controls Output mode switch: stereo (dual), parallel or bridge
    Input sensitivity switch: 0.775V or 1.4V
    Power Indicator: One blue LED
    Signal Indicator: One green LED per channel
    Clip (peak) Indicator: One yellow LED per channel
    Fault Indicator: One red LED per channel

    Construction
    Protection: Protection against short circuits, no-load, on/off muting,
    RF interference. Stable into reactive or mismatched loads
    Ventilation: Flow-through ventilation from front to back
    Cooling: Internal heat sinks with forced air. Fan cooled,
    speed regulated, thermal protection
Warranty
MANUFACTURER'S WARRANTY
3 year, no-fault parts and labor warranty on amps.
3 year warranty for most mics.
1 year warranty for Soundgrabber mic.
Crown Extended Warranty available as an option.


  • Customer Reviews
Loading....

Review Snapshot

by PowerReviews
CrownX1000 Stereo 2x300W Power Amp
 
4.5

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 2 customers

Displaying reviews 1-2

Back to Top

(2 of 2 customers found this review helpful)

 
4.0

First Impressions...GOOD

By John

from Live free or die state

Comments about Crown X1000 Stereo 2x300W Power Amp:

I just received this unit today. My first impression is that it is solidly built. Be aware that you will need to buy cables/adapters to use this with a preamp; in my case a Rocktron Prophesy 2. You will need two XLR to 1/4" male for the input, and you will need two Speakon to 1/4" mail adaptors for the output. I am using mine with the Marshall MG250DFX, and using the combo only for the 2X12 speakers. You will also need to get two 1/4" to 1/4" female to female adaptors, as the MG250DFX pseaker cables have a male connector, and the power amp out has a male 1/4" adapter as well. I'll update when I've had a chance to play with it. Hope this helps someone.

Comment on this reviewHelp Icon

(2 of 2 customers found this review helpful)

 
5.0

Power to spare!

By Charles

from Hotlanta GA

Comments about Crown X1000 Stereo 2x300W Power Amp:

What a great surprise and especially at this price! (I got it on sale for $99.99) Nothing complicated here, just sheer power! I'm using this to power two 15" with horn KUSTOM KPC15M's. At quarter power they nearly blow you out of the room! My ears were nearly bleeding at half power! I just got these yesterday so I cannot speak to durability but it's a CROWN! It would be nice if it had a 1/4" output option but that was cured easily enough with two speakon to 1/4" adapters.

Comment on this reviewHelp Icon

Displaying reviews 1-2

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.