Crown power without paying a king's ransom.

View all items from this brand

The X Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference. The Crown X1000 has an output of 300W per side at 4 ohms.

With more than six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. Check out the affordable Crown X Series.

Crown X1000 Stereo 2x300W Power Amp Features:

Stereo/parallel/bridge-mono mode
User selectable input sensitivity - 0.775V and 1.4V
Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
Efficient forced-air cooling prevents excessive thermal buildup
Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
Protection against shorts, no-load, on/off thumps and radio-frequency interference

Crown X1000 Stereo 2x300W Power Amp Specifications:

Guaranteed Minimum Power: 300W (per channel) @ 4 ohms / 200W (per channel) @ 8 ohms / 600W bridge mono @ 8 ohms
Frequency Response (at 1 Watt): 20Hz - 20kHz, +0/-1dB
Total Harmonic Distortion (THD): < 0.5%, 20 Hz - 20 kHz
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output
to –30 dB: 0.35%
Slew Rate: >10V/us
Voltage Gain: 29dB 31dB 33dB 36dB
Damping Factor (8 ?), 10 Hz - 400 Hz > 200
Signal-to-Noise Ratio: (below rated power,
20 Hz to 20 kHz, A-weighted): > 100 dB
Crosstalk (below rated power)
At 1 kHz: –75 dB
At 20 kHz: –59 dB
Input Sensitivity for full rated power at 8 ? 0.775V or 1.4V
Input Impedance (nominal)
Balanced: 20 k?
Unbalanced: 10 k?

Connectors, Controls and Indicators
Input Connectors: One balanced XLR and one unbalanced RCA per channel
Output Connectors: (Speaker Connectors) 4-POLE Speakon® and one pair Binding Post per channel
Front Panel Controls: Power on/off switch, one gain control per channel
Rear Panel Controls Output mode switch: stereo (dual), parallel or bridge
Input sensitivity switch: 0.775V or 1.4V
Power Indicator: One blue LED
Signal Indicator: One green LED per channel
Clip (peak) Indicator: One yellow LED per channel
Fault Indicator: One red LED per channel

Construction
Protection: Protection against short circuits, no-load, on/off muting,
RF interference. Stable into reactive or mismatched loads
Ventilation: Flow-through ventilation from front to back
Cooling: Internal heat sinks with forced air. Fan cooled,
speed regulated, thermal protection

Crown X1000 Stereo 2x300W Power Amp

3 year, no-fault parts and labor warranty on amps.
3 year warranty for most mics.
1 year warranty for Soundgrabber mic.
Crown Extended Warranty available as an option.

Get your gear covered!

Now you can get added warranty protection for your new gear. Pro Coverage steps in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program offers you UPGRADED COVERAGE if your product ever fails!

Pro Coverage includes:

• Accidental damage protection (new gear only)
• Expedited Repair
• Free Shipping (for returns or repairs)
• 100% Coverage for Commercial Use
• Extended Return Period
• Extended Price Protection
• No Lemon Guarantee
• Free Transfer of Coverage to a new owner
• Repair Costs Covered for up to 3 years from date of purchase
• Repairs Can Be Authorized Toll-Free by Phone or the via the web