Crest Audio PA 150 150W Power Amplifier  

Item #: 
127474181828171750
  • Write a Review

The Crest PA 150 is a rugged, medium-power amplifier with features that make it stand alone in the industry. It's a rack-mountable unit which occupies only one rack space, and yet packs a 75 Watts RMS... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The Crest PA 150 is a rugged, medium-power amplifier with features that make it stand alone in the industry. It's a rack-mountable unit which occupies only one rack space, and yet packs a 75 Watts RMS per channel punch into 4, 8, or 16 Ohms. It's selectable; a feature seldom found on the typical solid state amp. In bridge mode, this power amp delivers 150 Watts RMS into 8, 16, and 32 Ohms. (32 Ohms is the load impedance for a 150 Watt, 70 Volt distribution system). There's no fan in the PA 150 to make noise. Adequate cooling is provided by two massive heat sinks. Each channel is protected from excessive operating temperatures with a thermal/fault system that is automatic, and only activates under extreme conditions.

Features
  • 75W RMS per channel
  • 150W RMS Bridge mode
  • selectable 4, 8, or 16 Ohms
  • SPS compression on each channel
  • electronically balanced inputs
  • convection cooled
  • 1 rack unit
  • Weight: 22 lbs.
Specifications
  • Characteristics (@ 120 V AC, 60 Hz) [impedance selector setting]
    stereo mode, both channels driven: 4 Ohms, 1 kHz, 1% THD - 85 W RMS/channel (4 Ohms); 8 Ohms, 1 kHz, 1% THD - 85 W RMS/channel (8 Ohms) (25 V); 16 Ohms, 1 kHz, 1% THD - 85 W RMS/channel (16 Ohms)
    bridge mode, mono: 8 Ohms, 1 kHz, 1% THD - 170 W RMS (4 Ohms); 16 Ohms, 1 kHz, 1% THD - 170 W RMS (4 Ohms); 32 Ohms, 1 kHz, 1% THD - 170 W RMS (16 Ohms) (70 V)
    stereo mode, both channels driven: 4 Ohms, 20 Hz to 20 kHz, 0.1% THD - 75 W RMS per channel (4 Ohms); 8 Ohms, 20 Hz to 20 kHz, 0.07% THD - 75 W RMS per channel (8 Ohms) (25 V); 16 Ohms, 20 Hz to 20 kHz, 0.05% THD - 75 W RMS per channel (16 Ohms)
    bridge mode, mono: 8 Ohms, 20 Hz to 20 kHz, 0.1% THD - 150 W RMS (4 Ohms)
    16 Ohms, 20 Hz to 20 kHz, 0.07% THD - 150 W RMS (8 Ohms); 32 Ohms, 20 Hz to 20 kHz, 0.05% THD - 150 W RMS (16 Ohms) (70 V)
    Distortion stereo mode, both channels driven: 20Hz to 20 kHz, at rated power and load below 0.1% (4 Ohms); below 0.07 (8 Ohms); below 0.05% (16 Ohms)
    Input sensitivity and impedance: input attenuator set FCW, at rated power and load 0.7 V RMS (-3 dBV) (4 Ohms); 1.0 V RMS (0 dBV) (8 Ohms); 20 kilohms (28 dB gain)
    Slew rate (typical value): stereo mode, each channel: 15 Volts per uSec; bridge mode, mono: 30 Volts per uSec
    Frequency response (typical value): stereo mode, both channels driven ±1 dB, 1 W RMS at rated load 10 Hz to 40 kHz; 2 dB, ±at rated power and load 20 Hz to 20 kHz
    Damping factor (typical value) stereo mode, both channels driven, at rated load, 1 kHz: greater than 100 (4 Ohms); greater than 200 (8 Ohms); greater than 400 (16 Ohms)
    Hum and noise: stereo mode, both channels driven below rated power, unweighted 97 dB (4 Ohms); 100 dB (8 Ohms); 103 dB (16 Ohms)
    Power consumption: stereo mode, both channels driven at rated power and load 2.5 A at 120 V AC
    Dimensions (H x W x D): 1.75" x 19" x 8" ,(4.4 x 48.3 x 20.3 cm)
    Weight: 22 lbs. (10.0 kg)
  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.