Crest Audio CM 2204 Four Channel 300 Watt Power Amplifier
Write a Review
The CM 2204 Four Channel 300 Watt Power Amplifier drives 4 independent channels into low impedance or 70V loads. With this advanced amplifier architecture, there is no need to select the load impedanc... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The CM 2204 Four Channel 300 Watt Power Amplifier drives 4 independent channels into low impedance or 70V loads. With this advanced amplifier architecture, there is no need to select the load impedance. Each channel can drive 4 ohms and up for flexible system configuration. Sonics are outstanding, and the price enables use in a multitude of applications. High efficiency allows up to 4 channels in a space-saving 2U rack height. A switch allows selection of 0.775V sensitivity or x40 gain. A high pass filter is selectable per channel. 100V and 50V operation is supported with the CMx accessory (sold separately).
Crest Audio's CM Series amplifiers open new horizons for professionals requiring a sonically superior, multi-channel amplifier. Any where performance, functionality and rack space economy are system design considerations such as: bars/clubs/restaurants, video conferences systems, hotels/motels, industrial, or retail stores.
Power into 4 Ohm - 150 W x 4
Power into 8 Ohm - 220 W x 4
Power @ 70V - 220 W x 8
Multi-load architecture allows low impedance or 70 Volt operation without select switch (100 or 50 Volt output operation with CMx accessory)
Low mains current draw
Compact design allows up to 8 channels in a 2U rack space
Cost-effective for many multi-channel applications
CM Series Protection Circuits
ACL (Active Clip Limiting) automatically reduces gain at the onset of clipping to prevent amplifier and load damage
IGM (Instantaneous Gain Modulation) monitors load current to protect against overloading
AUTORAMP gradually increases gain when the amplifier is turned on, preventing abrupt turn-on level
Other protection features include: short circuit, DC voltage, comprehensive thermal management, current in-rush turnon/off transient and sub/ultrasonic input
Model: CM 2204 Output Power 4 Ohms: 150W x 4 Output Power 8 Ohms: 220W x 4 Output Power 70V: 220W x 4 Frequency response (1W into 8 Ohms ): 1KHz, <0.02% THD+N, one channel driven, non-bridged operation - 5Hz to 20kHz, +/- 1dB THD+N: <0.02% at rated power (@ 70V, 1kHz) Damping factor: 200:1 into 8 Ohms Input CMRR: >60dB @ 1KHz Input sensitivity @ 70V: 0.775V for full rated output power (0.775V gain selected); .75V for full rated power (x40 gain selected) Input impedance: 20Kohms balanced, 10Kohms unbalanced Hum and noise: -97dB, A-weighted Crosstalk: < -60dB below max rated power (1KHz) Power supply: linear transformer Circuit breaker rating (120V/230V): 6A / 3A Current draw (120VAC), 1/8 power, 70V: 2.3A Current draw (120VAC), 1/3 power, 70V: 4.4A Current draw (120VAC), at idle: <1A Thermal emissions 1/3 power, 70V: 621 btu/hr Cooling: front to side via single DC fan Input connectors: balanced three pin Phoenix Output connectors: two pin Phoenix Controls: front panel: power switch; rear panel: stepped attenuators, HPF select, gain select, circuit breaker LED indicators: signal, clip, protect Construction: 16-gauge steel chassis with 16+12-gauge rack-ears Dimensions (W x H x D): 19" x 3.5" x 16.69" (483 mm x 89 mm x 424 mm) Weight: 34.0 lbs. (15.42 kg)
You are changing the Ship-To country.
Our product catalog varies by country due to manufacturer
restrictions. If you change the Ship-To country, some or
all of the items in your cart may not ship to the