Skip to main content

Crest Audio CA 6 1500W Power Amplifier

Item #: 
127474181823471730
  • Write a Review

Designed to achieve unsurpassed sonic performance and long-term reliability, the Crest Audio CA 6 1500W power amplifier comes equipped with professional power-handling capabilities and exceptional low... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email

Recommended Products
Overview

Designed to achieve unsurpassed sonic performance and long-term reliability, the Crest Audio CA 6 1500W power amplifier comes equipped with professional power-handling capabilities and exceptional low-end response. It is an ideal choice for installations and touring applications that demand the finest audio quality. The CA 6 rack amp provides high power output coupled with true clarity, and is well-suited for high-powered subwoofers and passive full range systems.

Absolute sonic accuracy is the hallmark of every Crest amplifier. Bass is solid and defined to the limits of audibility, with ample current reserves delivered by an "over-engineered" power supply and advanced Class H circuitry. Wide-bandwidth output devices assure detailed, transparent high frequency response. And thanks to Crest's exclusive IGM circuit, the CA6 will drive 2 Ohm loads safely without compromise in performance.

The CA series provides tremendous value in proven amplifier technology. Crest Audio amps form the backbone of discriminating rental systems and high-power club installations worldwide. Auditoriums, churches, regional tour sound companies and mobile DJs are all ideal candidates for the CA Series' combination of value and sonic quality.

FEATURES

  • 8 Ohm Stereo - 400 W
  • 4 Ohm Stereo - 600 W
  • 2 Ohm Stereo - 750 W
  • 8 Ohm Bridged - 1200 W
  • 4 Ohm Bridged - 1500 W
  • Legendary over-built power supply
  • Toroidal power transformer
  • Latest generation of high-speed, wide-bandwidth output devices
  • Twin-tunnel cooling with back-to-front air flow
  • Dual, rear-mounted, continuously variable-speed fans
  • Balanced male and female XLR inputs with switch-configurable XLR polarity and sensitivity selection
  • Speakon or five-way binding post output connectors (market dependent)
  • Stereo, parallel, bridged-mono mode selector switch
  • Ground-lift switch
  • Front panel circuit-breaker switch
  • Recessed, stepped attenuators
  • SIGNAL present/active, PROTECT, and ACL LED's
  • Modular construction
  • Powder-coated steel chassis
  • Five-year warranty (3-Year Warranty with 2 additional years if Registration Card is sent to Crest Audio)
SPECIFICATIONS
  • Model: CA6
  • 8 Ohms Stereo Power: 400W 1kHz, 0.03% THD+N; 350W 20Hz-20kHz, 0.1% THD+N
  • 4 Ohms Stereo Power: 600W 1kHz, 0.03% THD+N; 500W 20Hz-20kHz, 0.1% THD+N
  • 2 Ohms Stereo Power: 750W 1kHz, 0.03% THD+N; 600W 20Hz-20kHz, 0.1% THD+N
  • 8 Ohms Bridged Mono Power: 1200W 1kHz, 0.03% THD+N; 1000 W 20Hz-20kHz, 0.1% THD+N
  • 8 Ohms Bridged Mono Power: 1500W 1kHz, 0.03% THD+N; 1200W W 20Hz-20kHz, 0.1% THD+N
  • Max RMS Output Voltage (each channel): 73V
  • Peak Output Voltage (each channel): 103V
  • Frequency Response (+0 / -0.3dB, 1W/81/2):
  • 20Hz-20kHz, -3dB@135kHz
  • Power Bandwidth (rated power at 4 Ohms, 1% THD+N): 20Hz-20kHz, -1.1dB/+0dB
  • TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input.
  • THD+N (rated power at 4 Ohm, 1kHz): <0.01%
    SMPTE IMD (rated power at 81/2, 60Hz & 7kHz): <0.01%
    Damping Factor (10-400Hz at 8 Ohms): 400:1
  • Input CMRR (1kHz): > - 60dB
  • Input Sensitivity (rated power at 8 Ohms ): 0.775V standard (switchable)
  • Voltage Gain: X68 standard (switchable)
  • Input Impedance (balanced/unbalanced): >20kohms/>10kohms
  • Hum and Noise ("A" weighted, full power, 4 Ohms): -105dB
  • Crosstalk ("A" weighted, full power, 4 Ohms"): > - 60dB
  • Class: H
  • Input Connectors (per Channel): Female XLR (pin 2+, switchable for pin 3+), TRS (tip+)
  • Input Connectors (per Channel): Speakon connectors or 5-way output binding posts (market dependant)
  • Filter Storage: 68,000 mF
  • Power Supply (factory configured): 100V-240V, 50-60Hz
  • Idle Current Draw 120V: 1.6A
  • 1/8 Power Current Draw (typical music, 120V/4 Ohms) 6.0A
  • 1/3 Power Current Draw (continuous music, 120V/4 Ohms): 13.0A
  • Max Current Draw (circuit breaker rating, 120V/4 Ohms): 18.0A
  • Thermal Emissions (1/8 Power, 4 Ohms): 2630 BTU/hr
  • Thermal Emissions (1/3 Power, 4 Ohms): 3713 BTU/hr
  • Cooling: Back-to-front via 2 rear panel mounted variable-speed DC fans
  • (filters removable without tools)
  • Controls: Front Panel: 2 attenuators; Rear Panel Switches: signal ground lift,
  • mode select switch
  • LED indicators (per channel) Clip/Limit, Signal, Temp/DC, Active
  • Construction: Steel chassis, 16 gauge. Double thickness in rack ear areas.
  • Dimensions (W x H x D): 19" x 3.5" x 18", (483 x 89 x 458 mm)
  • Weight: 44 lbs. (20 kg)
  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.