Stereo power, programmable DSP, and vintage styling.

The VTX200SH is a great sounding, stereo guitar amp head with total control over the DSP section and vintage styling. The effect section of the VTX200SH is designed to take advantage of the STEREO power section to give a huge, spacious sound to your tone. Crate has created special stereo versions of many of the most popular effects on the VTX models. These effects add drama with incredible clarity and tone.

Pumping 100 watts per channel, the VTX200SH amp head combines great sounding analog with total control over the DSP section and vintage styling. This amplifier is designed for the player who is into the vibe and styling of the V-Series, but wants up to a three channel analog amp with "tweakable" digital effects and the ability to program up to six effects in the three channels.

The DSP section includes 30 different highly-customizable effects including Reverb, Delay, Chorus, Flange, Phaser, Octave and Wah. Bypass included.

Crate VTX Series VTX200SH 2 x 100W Stereo Guitar Amp Head Features:

3-channels
Stereo 2 x 100W
30 customizable DSP effects, plus bypass.

Crate VTX Series VTX200SH 2 x 100W Stereo Guitar Amp Head Specifications:

Output Power Rating: 70W per side @5% THD, 8 ohm load
100W per side @5 percent THD, 4 ohm load
Maximum Input Signal Accepted 5 volts peak-to-peak min. @ 1kHz
Total System Gain: Ch 1 74dB, all controls @10
Ch 2 88dB, all controls @10
Ch 3 103dB, all controls @10
Channel 1: Low Control 26dB range @ 70Hz
Mid Control 10dB range @ 900Hz
High Control 20dB range @ 10kHz
Channel 2: Low Control 26dB range @ 70Hz
Mid Control 10dB range @ 900Hz
High Control 20dB range @ 10kHz
Channel 3: Low Control 17dB range @ 100Hz
Mid Control 16dB range @ 1kHz
High Control 12dB range @ 7kHz
Internal Speaker: (2) Custom Design 12", 8
Input Impedance 470k
Power Requirements: 120 VAC, 60Hz, 95VA
100/115VAC, 50/60Hz, 95VA;
230VAC, 50/60Hz, 95VA