The all-tube Budda Bully guitar amplifier head is a spare-no-expense high gain juggernaut that is at home in any guitar rig. The amp features 3 channels; clean, rhythm and lead, all with independent 3... Read More
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The all-tube Budda Bully guitar amplifier head is a spare-no-expense high gain juggernaut that is at home in any guitar rig. The amp features 3 channels; clean, rhythm and lead, all with independent 3 band EQ, reverb control, effects loops with send and return levels, plus separate resonance and presence controls. It's a great fit for any kind of high-octane guitar application, from rock to blues to metal to fusion, the Budda Bully is the king of the playground. It just might take the other kids' lunch money.
Channel 2's effects loop features a switch that makes the effects loop global, for incredible versatility in effects routing. The amp also features a patent pending feature called PowerPan, where the user can pan between solid state and tube rectifiers and anywhere in between! PowerPan makes the different tonal options almost limitless.
There's even a 2nd rectifier tube to stand as a spare in case of a tube failure. The Budda Bully also features a 1/2 power switch for operating the amplifier in either ½ power or full power mode. Using the ½ power switch along with the PowerPan feature allows the output of the amp to be between 25 and 120 watts for amazing versatility. Each channel features a footswitchable pedal style lead boost called Overboost that is also 100% tube driven. The back panel features an amplifier chain section with a power-amp in/preamp-out jack and a slave output, impedance selector and MIDI in/through for use in professional MIDI switching rigs.
High quality audio grade resistors and poly caps throughout
MIDI control over channel switching with MIDI IN/THROUGH jacks
Slave output plus Power-amp input/Pre-amp output
Separate spring reverb control on each channel
Specially designed 10-button multi-function footcontroller (included)
Three channels, clean, rhythm and lead
Separate 3 band passive EQ on each channel
Separate resonance & presence controls on each channel
Four x EL34 120w power section, 7x12AX7 preamp section and 2 5U4 rectifier tubes for rectifier tube failure back-up
Rectifier can use 5U4, 5A4 or GZ34 tubes
'Overboost' feature on each channel
High and low level 1/4" inputs
Power amp can use 6L6Gc or EL34 tubes (plus KT66, KT88 5881 and 6CA7 with re-biasing)
Patent pending PowerPan rectifier selector knob
Ceramic tube sockets
Stores nine custom presets, and provides extensive MIDI control for automation
Power amp section
Tubes: Four EL34 tubes with 12AX7 phase splitter / driver
Rated power and impedance: 120 Watts RMS into 16, 8 or 6 Ohms
Minimum Input Sensitivity: 0dBu, 0.775V RMS (with Master on max) Maximum Input Sensitivity: +6dBu, 1.6V RMS (with Master on half)
Input impedance: 250k Ohms
Maximum output level: +22dBu, 10V RMS (at full power) Load impedance: 10k Ohms or greater
Special ten-button metal footswitch with LED indicators and detachable cord (supplied). Selects between three channels, Over-Boost, three effect loops, Reverb, and Master Boost as well as nine Preset modes.
System hum and noise @ nominal level
(Clean channel – 20Hz to 20kHz unweighted) Greater than 74dB below rated power
Specifically designed bass, mid & treble passive-type EQ on each preamp channel. Resonance and Presence damping EQ on each channel.