Skip to main content

Bose Panaray Digital System Controller  

Item #: 
1274741956982119564
  • Write a Review

For Bose speaker systems requiring active EQ, the Bose Panaray Digital System Controller is the one module that covers all the bases. The Panaray system controller gives you push-button control of lou... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

For Bose speaker systems requiring active EQ, the Bose Panaray Digital System Controller is the one module that covers all the bases. The Panaray system controller gives you push-button control of loudspeaker EQ along with 4 independent progammable delays, limiters and signal routing. Utilizes digital signal processing (DSP) architecture to provide the best spectral response from any Bose speaker system using active EQ. No programming required, as any Bose speaker EQ setting can be accessed by just selecting the selecting the desired preset and configuration. In addition to controlling EQ presets, the Panaray also features 4 signal delays which can be used for decentralised or distributed speaker alighnment, 4 output limiters to for speaker sound spike protection, and a programmable router allows each output to select full range and high-or-low-pass combinations of input signals. Contains 180 presets with loudspeaker curves, EQ for all known combinations of Bose loudspeakers with Bose bass units, in mono or stereo, with 3 special settings for MB4 bass arrays. Sophisticated bass frequency controls allow selective targeting of bass energy to specific areas, i.e. to the dance floor and not to the bar. 2 XLR balanced inputs and 4 XLR balanced outs. The Panaray System Digital Controller should be used when you utilize the Panaray 402II, 802II, 502A, 502B, MB4, or MA12 loudspeakers as well as the Panaray LT line of speakers. Can also be used with FreeSpace 3, Model 8, Model 32, Model 32SE, Model 1B and Model 102 loudspeakers. The Panaray System Digital Controller puts you in the driver's seat of your Bose active EQ sound system with previously unheard of flexibility and control.

Features

2 XLR balanced inputs with:
44.1kHz sample rate
Freq. response: 20Hz - 20kHz, +0/-0.1dB
Input level: Max: +18dBu, Minimum: 0dBu
Sensitivity@9dB headroom: -12 dBu to +9dBu
Max. output level: +18dBu (balanced)
A to D conversion: 24 bit, 128x oversampling
THD: Typ < -100dB, 20kHz to 20kHz
Dynamic range:95dB typ, 20kHz - 20kHz
4 XLR balanced outputs with:
Max output level: +18dBu (balanced)
Output ranges: 20/14/8/2dBu
D to A conversion: 24 bit, 128X oversampling
D to A delay: 0.63ms @ 44.1kHz
Dynamic range: 100dB typ 20Hz - 20kHz
THD: typ < 94dB (0.002%) @ 1 kHz + 20dBu
Freq. responce: 20Hz - 20kHz: +0/0.5dB
Crosstalk: < -95dB, 20Hz to 20kHz
2 x 16 backlit display



Warranty
MANUFACTURER'S WARRANTY
5 year warranty on all pro gear (speakers and amps).
Warranty terms vary on other products. Check with manufacturer for specific product warranty.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.