100W compact studio subwoofer with adaptive crossover.

The Blue Sky SUB 8 Universal speaker adds true low frequency extension to your existing near-field monitors with a sealed box design for more "slam" and a bass response down to 30Hz and below. A single 8" high excursion woofer features a vented motor for low power compression, and is powered by a low-distortion 100W discrete symmetrical bipolar amplifier. The Blue Sky SUB 8 Universal features built-in 2.1 bass management, along with dual independently tunable state variable high-pass and low-pass filters (50Hz-160Hz) with 4th order slopes, which adjust the crossover point to ensure optimum system response.

The SUB 8 Universal studio speaker can be combined with Blue Sky's SAT 5 to form the highly acclaimed and award-winning ProDesk 2.1 Monitoring System.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

Blue Sky Universal SUB 8 Active Studio Subwoofer Features:

Sealed box design
True LF response - 30Hz and below
8" high excursion woofer with vented motor
100W discrete symmetrical bipolar amplifier
Dual independently tunable state variable high-pass and low-pass filters (50Hz-160Hz) with 4th order slopes

Blue Sky Universal SUB 8 Active Studio Subwoofer Specifications:

Speaker Enclosure
.75" MDF with 1" front and rear baffle
Isolation feet included
Dimensions: 13"H x 16"W x 13.37"D (15.76" with heatsink and grille)
Weight 48.5 lbs. (22kg)
8" Hemispherical Subwoofer
8" high excursion woofer
Vented motor structure
Cast aluminum frame
2" voice coil
Aluminum alloy cone
Electrical Specification
Input Voltage: 115/230 VAC 50/60Hz switchable
Wattage: 200 Watts
Fuse: 115VAC 2A - 250 V 5x20mm (Time Delay or Slo-Blo), 230VAC 1.25A - 250 V 5x20mm (Time Delay or Slo-Blo)
Amplifier
Discrete symmetrical bipolar design
100W RMS into 4 ohm
.01% THD + noise at rated power @ 100 Hz
XLR balanced input
Adjustable gain control
Voltage sensitivity: 100mv=90dB SPL@1m
Frequency response (SUB IN - anechoic): 35-200Hz
Typical in room response (SUB IN): 20-200Hz (3000 cubic feet)
Bass-Management
Input impedance: 20K balanced
Common mode rejection: 40dB typical @ 60Hz
Maximum input level: +24dBu balanced
Output impedance: 200 ohms balanced
Nominal gain: 0dB
SUB IN low pass filter: None
Switchable Filter Settings
SAT 5 Mode
High pass filter: none (uses filter in SAT 5)
Low pass filter: 80Hz 4th Order
Universal Mode
Dual independently tunable state variable high pass and low pass filters
Frequency range: 50Hz-160Hz
Filter slope: 4th order