Blue Sky SUB 12 Powered Subwoofer

Put a big bottom on your monitor system.

The Blue Sky SUB 12 was specifically designed to complement the SAT 6.5 and SAT 6.5 MK II Satellite speakers. Featuring a cast aluminum frame, 12" forward-firing driver with 2" voice coil, the SUB 12 has a dedicated 200W amplifier with a frequency response of 30Hz-200 Hz +/ 3 dB (anechoic) and a typical response of 20Hz to 200Hz (3000 Cubic Foot Room). In addition, the SUB 12 has a built-in 2.1 bass management system with a 4th order, 80 Hz Linkwitz-Riley low-pass filter and 2nd order 80Hz high pass filter for the satellite. Rear panel functions include: Right/Left In and Out; SUB In and Out (for connecting multiple subwoofers); Mute and Phase switches; SUB Gain & Power LED; Power switch; and Slo-Blo Fuse. Measuring 18"H x 15"W x 20"D and weighing 62 lbs., the SUB 12 features MDF construction with four recessed 1/4" x 20 threaded inserts for either spiked or rubber feet.

The SUB 12 is also fully compatible with Blue Sky's SAT 5 / SAT 5 MKII and SAT 12*. Additionally the SUB 12 is compatible with any THX pm3 approved nearfield monitor.

*NOTE: When the SUB 12 is used with the SAT 12, multiple SUB 12s should be used.

Blue Sky SUB 12 Powered Subwoofer Features:

Down to below 30Hz (typical in-room response down to 20Hz)
Full 2.1 bass-management circuitry that ensures seamless summation when used with Blue Sky's SAT 6.5 / SAT 6.5 MKII, SAT 5 / SAT 5 MKII and SAT 12.
Fully compatible with any THX pm3 approved nearfield monitor
Sealed Box Design means no port noise and better transient response
Easy Setup
General
All subwoofer measurements are measured using the subwoofer
direct input, which does not have a low pass filter
Voltage Sensitivity: 90dB SPL @ 100mv @ 1M (40 to 80Hz bandwidth limited pink noise)
Frequency Response (anechoic): 30 to 200Hz +/-3dB
Typical In-Room Response: 20 to 200Hz (3000 Cubic Feet)

Bass Management Section
Input Impedance: 20k Ohms balanced
Common Mode Rejection Ratio: 40dB typical @60Hz
Maximum Input Level (all inputs): +24dBu balanced
Maximum Output Level: +24dBu balanced
Output Impedance: 200 Ohms balanced
Auto Mute Time Out: >15 Minutes
Mute Threshold (all inputs): 30mV

Left &Right Inputs to Sat Outputs
Gain (balanced in and out): 0dB
High-Pass Filter type: 2nd order Linkwitz-Riley
High-Pass Filter Cutoff: 80Hz
High-pass Filter Q: .707
THD + Noise: .002% @ 1kHz @ +4dBu

Left & Right Inputs to Sub Out
Gain: 0dB
Low-Pass Filter Type: 4th order Linkwitz-Riley
Low-Pass Cutoff: 80Hz

Subwoofer Direct In to Direct Output
Gain: 0dB
Low-Pass Filter: None

Enclosure
Solid 3/4" MDF construction with 1" MDF Front and Rear Baffle
Viscoelastic energy absorbing front baffle coating
Flush mounted driver
Isolation feet are included. Inserts for optional attachment of spike
feet.
Dimensions are 18" H x 16" W x 20" D (22.07" with heatsink and
grill)
Weight 62lbs.

12" Woofer
Long excursion design with cast aluminum frame.
2" voice coil with vented motor for high power handling
Fully video shielded

Subwoofer Amplifier
Discrete symmetrical bipolar design with localized feedback
200-W RMS into 4 Ohms
THD + Noise less than 0.015% at rated power @100Hz
Adjustable gain control