Beyerdynamic MCE 58 Electret Omnidirectional Condenser Microphone for ENG/EFP
Write a Review
The MCE 58 condenser microphone has a very high unbalanced output that allows direct connection to mobile DAT and MD-recorders. The elasticated suspension of the transducer element eliminates unwanted... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The MCE 58 condenser microphone has a very high unbalanced output that allows direct connection to mobile DAT and MD-recorders. The elasticated suspension of the transducer element eliminates unwanted handling noise and built-in active filters suppress unwanted low-frequency noise such as traffic rumble. The MCE 58 has a frequency response curve which has been optimized for excellent speech intelligibility The non-glare surface is scratch-resistant and will withstand the rough use often associated with news gathering events. Requires phantom power.
Omnidirectional polar pattern
High output level
Slim line design
Battery powering (1.5 V)
Transducer type: Condenser (back electret)
Operating principle: Pressure
Polar pattern: Omnidirectional
Open circuit voltage at 1 kHz (0dB = 1V/Pa) : 4 mV/Pa
Nominal impedance: 370 Ohms (unbalanced)
Load impedance: 2 k Ohms
Connector: 3-pin XLR; 1,3 = ground, 2 = signal +
Length: 260 mm
Shaft diameter: 25 mm
Head diameter: 45 mm
Weight without cable: 200 g
Frequency response: 40 - 20,000 Hz
Max. SPL at 1 kHz: 132 dB
S/N ratio rel. to 1 Pa: 60 dB
A-weighted equivalent SPL: 26 dB
Power supply: 1.5 V battery (type Mignon AA/LR 6)
Current consumption: 20 mA
7. Warranty a. In the event of any defect in the item of sale, the choice of remedy shall lie with us. Any expenses connected with the remedying of defects arising from the fact that the item of sale has been sent or taken to a place other than the place of performance shall be borne or refunded by the Customer. For claims to compensation on account of a defect, Section 6 of these Terms and Conditions shall apply. b. The period of limitation for claims for defects shall be 2 years. This shall not apply in the case of fraudulent misrepresentation, willful intent or the cases specified in Arts. 478 and 479 BGB. This shall not affect the limitation period for recovering from the supplier as provided for under Arts. 478 and 479 BGB. The start of the limitation period shall be as specified in the law. c. Warranty shall be excluded if the Customer has processed or resold the item of sale after he has discovered, or ought to have discovered, a defect unless he is able to prove that the processing or resale was necessary in order to prevent greater loss or damage. d. Natural wear and tear and damage through improper treatment, handling or storage is excluded from warranty. e. The return of products is allowed only after prior approval by beyerdynamic.