The Beyerdynamic M 99 is a studio quality dynamic moving coil microphone. The tailored frequency response suits many applications from instrument miking to on-air broadcasting. The Beyerdynamic TG-X t... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The Beyerdynamic M 99 is a studio quality dynamic moving coil microphone. The tailored frequency response suits many applications from instrument miking to on-air broadcasting. The Beyerdynamic TG-X technology used in the M 99 features a strong neodymium magnet system and a mass reduced special Mylar diaphragm to give the microphone a powerful reproduction with excellent transient characteristics. The frequency response is extremely linear and guarantees audio quality which has, until now, only been achieved by using high quality condenser microphones. The frequency select switch at the base of the microphone allows three settings of equalization, linear and two optimized settings for vocals and instrument miking. A second switch is for presence accentuation. This allows further adjustment for close miking techniques or kick drum miking. The hypercardioid polar pattern helps to eliminate feedback in live applications and allows a good separation between different instruments. The microphone can operate at very high sound pressure levels without loss of sound quality and virtually no distortion. The M 99's die cast casing is made of aircraft grade aluminum and finished with an attractive metallic varnish. Applications include vocals, radio announcers, instruments, and kick drum.
Extremely linear frequency response
Switchable presence accentuation and equalization for bass drum
Hypercardioid polar pattern
Integrated elastic suspension
Transducer type: Dynamic
Operating principle: Pressure gradient
Polar pattern: Hypercardioid
Open circuit voltage at 1 kHz (0dB = 1V/Pa) : 3.0 mV/Pa / 2 mV/Pa -50 dBV/-54 dBV
Magnetic field suspension: > 20 dB at 50 Hz
Nominal impedance: 280 Ohms
Case/finish: Aluminium/die cast
Connector: 3-pin XLR
Length: 163 mm
Shaft diameter: 23/25 mm
Head diameter: 56 mm
Weight without cable: 421 g
Frequency response: 30 - 18,000 Hz
7. Warranty a. In the event of any defect in the item of sale, the choice of remedy shall lie with us. Any expenses connected with the remedying of defects arising from the fact that the item of sale has been sent or taken to a place other than the place of performance shall be borne or refunded by the Customer. For claims to compensation on account of a defect, Section 6 of these Terms and Conditions shall apply. b. The period of limitation for claims for defects shall be 2 years. This shall not apply in the case of fraudulent misrepresentation, willful intent or the cases specified in Arts. 478 and 479 BGB. This shall not affect the limitation period for recovering from the supplier as provided for under Arts. 478 and 479 BGB. The start of the limitation period shall be as specified in the law. c. Warranty shall be excluded if the Customer has processed or resold the item of sale after he has discovered, or ought to have discovered, a defect unless he is able to prove that the processing or resale was necessary in order to prevent greater loss or damage. d. Natural wear and tear and damage through improper treatment, handling or storage is excluded from warranty. e. The return of products is allowed only after prior approval by beyerdynamic.
You are changing the Ship-To country.
Our product catalog varies by country due to manufacturer
restrictions. If you change the Ship-To country, some or
all of the items in your cart may not ship to the