A perfect choice for stereo pairs, ribbon mics, and any other application where purity is the goal.
The 2-channel Benchmark MPA1 microphone preamplifier is meticulously designed to Benchmark standards of transparency, ultra-low distortion, and ultra-low noise performance. The MPA1 mic pre is a perfect choice for stereo pairs, ribbon mics, and any other application where audio purity is the goal.
Pristine Input Stage
The Benchmark MPA1 mic pre's input stage offers high-voltage headroom (+29 dBu) and single-stage gain control to maximize the signal-to-noise ratio. The MPA1 maintains superb noise performance across the entire gain range (74 dB) by utilizing precision-matched, low-noise, transistor quad-arrays. A servo-controlled circuit minimizes DC-offset and maximizes headroom.
Complete Low Frequency Response
The MPA1 exhibits exceptional low-frequency performance with a clever dual-capacitor AC-coupling design. This dual-capacitor design defeats the limitations of single-capacitor AC-coupling designs, achieving an exceptionally low corner-frequency with excellent subsonic phase-accuracy.
Innovative Stepped-Resistor Gain Control
The gain control of the Benchmark MPA1 is completely unique. The gain is controlled via a 38-position, switched resistor ladder, set up in a continuously rotating orientation via relay control. This gain control circuit offers 2 dB per step, 0-74 dB of gain without attenuation, and inter-channel gain precision of +/- 0.03 dB. A make-before-break scheme creates a silent switching circuit.
Elegant Phantom Power Protection
The transistor stage is protected from phantom power surges with an ultra-fast, multistage protection circuit. This circuit utilizes the high-speed capabilities of low-capacitance Schotky diodes and the high-current capabilities of TVS diodes to absorb the phantom power surges caused by shorts and plugging/unplugging microphones with +48V on. This circuit is pre-biased so that it is isolated from the circuit in normal operation and activated when a surge occurs.
For mounting options, see RM Kit #485682, RM Coupler #485683, and RM Blank #485683.
