The NU6000DSP, part of the iNUKE series from Behringer, is an extremely lightweight and durable power amplifier with DSP control and USB interface. The NU6000 has a œback-to-front ventilation system ... Click To Read More About This Product
The NU6000DSP, part of the iNUKE series from Behringer, is an extremely lightweight and durable power amplifier with DSP control and USB interface. The NU6000 has a œback-to-front ventilation system and incorporates High-Density Class-D components with "near-zero" thermal build-up, which allows the unit to run cool and avoid the need for massive heat sinks. Each channel has their own independent DC, LF, and thermal overload components that will automatically protect the amplifier and speakers to avoid any damage to your system.
iNUKE DSP Series amplifiers come ready for action right out-of-the-box. The built-in DSP and 24-bit/96kHz converters ensure quality signal integrity with a broad dynamic range. DSP functions include a delay for delay-line loudspeakers, crossover, EQ (eight parametric, two dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC. All iNUKE DSP models can also be set up, controlled and monitored via the front panel USB connector.
The exterior of the NU6000 is manufactured with a sturdy metal housing that secures all of the internal components. The rear panel of the NU6000 has XLR and TRS input connections, and also features professional twist-lock speaker outputs that provide versatile and secure connections for your system. There are 4-segment signal and limit LED' on the front of the NU6000 that help you visually monitor performance levels. The VU6000 operates in stereo or dual-mono modes, and has a switch-mode power supply that provides noise-free audio with good transient response and low power consumption. The iNUKE series VU600 offers a durable and affordable power amplification solution for your sound system.
GUITAR CENTER'S PRO COVERAGE
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.
Reviewed by 2 customers
Displaying reviews 1-2
Comments about Behringer iNUKE NU6000DSP:
I would say over the past few years, with buying my own sound gear, financials have been a driving factor in my selection. I have opted for Behringer Equipment a number of times along the way quite simply due to a lack of cash on hand. Some of the Bands and other DJ's and Sound Professionals along the way have given me the typical harassing for my gear selection but ultimately I must add a note of the compliments for how well we have managed to make that Behringer stuff sound. This Amp falls in line with every bit of that. It fit well, into my budget and has the power and DSP options to make what I need, happen. Anyone passing this Amp over just because it was made by Behringer, I think it may be your loss. Now to be honest, I have yet to put 100 shows through the amp but I would note after a solid night DJing and a 3 Band Local Rock show I can say I love the cold air it blows after a good workout and it has done well enough to convince me I want another one to replace another of my heavy old amps. Sorry but dropping 26 to 40 plus pounds out of DJ Rack or an Amp case has become of interest to me as I get older and my Knees and Back aren't what they once were etc. Down to some Details I find important to note. The look of this amp is very modern and I like the look. It is not as deep as some other amps and I would note it does stick out the front of my DJ Rack a good deal. The handles on the front make for mounting, remounting and general handling ease but provide no protection while moving the case around (the amps knobs and buttons are still subjected to sitting and rubbing on my tummy), which in a 1 or 2 amp case would not likely be an issue with their light weight, but in my DJ rack with other gear it is just natural to sit on my belly as I carry it any distance. Without a great deal of experience using the DSP functions on amps previously I was still able to in about 20 minuets figure out how to set up multiple settings for different uses. Basically one for just Mains and one for Mains with Subs. I have yet to use the Behringer Software with the easy to access (Front of the Amp) USB, but I hear it is nice and easy to use as well. I hope you all find this review useful. I know after reading other reviews on the net, well sometimes you can just tell people have had a bad experience not typical, and perhaps have not even touched the item they are reviewing. Side note after purchasing one of these and utilizing it I had to go buy another. Now I am considering the NU3000DSP. I would also like to note a Huge Thanks to the Pro Audio Folks at Store 242 in Medford, thanks for putting up with me. Best of Luck to you all. Enjoy or Endure! Fozzy
Comments about Behringer iNUKE NU6000DSP:
I had purchased this to power to 18" subs without bridging, and it does that fine. However, to put one per side the "B" channel speakon needs to be wired +2, -2. In order to do that, one needs a 4 pole speakon connector. You can use a 2 wire cable, but connector has to be rewired. I just put both subs on channel A for a 4 ohm load and no rewiring. Just a heads up , as I was not aware of this wiring thing. I'm still fine tuning DSP, but its working nicely so far. I'll update if I need to....
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.