Top Seller

Behringer EUROPOWER PMP6000 20-Channel Powered Mixer  

Item #: 
1275776902435
  • Write a Review

The Behringer EUROPOWER PMP6000 Powered Mixer (2 x 800W stereo, 1600W bridged mode) produces even more power than previous mixers while maintaining famously low weight and high efficiency. The Behring... Read More

Available 10-12-2016 You will not be charged until order ships. Email me when this is in stock.

Price:
$59999
Add to Wish List
GC Gear Card
Special Financing Offers
Learn More
 
PICK UP IN STORE Available in: 3-7 Days (estimated) Denver, CO (5.5  mi) Change Pick Up Store


,
SUN:11AM-7PM
MON-FRI:10AM-9PM
SAT:10AM-8PM
  • Pro Coverage Eligible
  • Free Shipping
  • Easy Returns

QUESTIONS? CONNECT WITH AN EXPERT INSTANTLY.

  • Chat Now
  • Call 866-498-7882
Overview

The Behringer EUROPOWER PMP6000 Powered Mixer (2 x 800W stereo, 1600W bridged mode) produces even more power than previous mixers while maintaining famously low weight and high efficiency. The Behringer EUROPOWER PMP6000 mixer employs Class-D technology including a switch-mode power supply, significantly reducing weight and heat. The 20-Channel Behringer PMP6000 features 12 built-in XENYX mic preamps, 2 studio-grade 24-bit FX processors with 100 presets, and FBQ Feedback Detection.

What is Class-D Technology?
Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off, which significantly reduces power losses from the output devices given off as heat. Less heat means the amps don't need massive heat sinks, and that makes them lighter. This no-compromise design means the EUROPOWER PMP6000 mixer will deliver full power with incredible fidelity all night long, without the need for lengthy rest cycles.

When used in conjunction with switching-mode power supplies, which don't require huge and heavy transformers, Behringer's Class-D amplifiers provide tremendous dynamic punch and superior fidelity. The resulting speaker systems are much lighter, making them easy to transport and set up.

Massive Mono or Stunning Stereo
EUROPOWER PMP6000 gives you the choice of 2 x 800-watt stereo, 2 x 800-watt dual mono mode (giving you a mono version of the main signal through one powered output plus a mono version of all monitor send signals through the second powered input) or 1,600-watt bridged mono sound. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the EUROPOWER PMP6000 mixers can accommodate. This sonic versatility also makes it an excellent choice for churches, where vocals and stereo recordings often share face time.

Classic Control, State-of-the-Art Sound
Leave the mic preamps at home, because the quality of sound that was once only available in the studio is ready to go wherever you do. Built-in, boutique-caliber mic preamps with switchable +48V phantom power make it possible to use either dynamic or condenser mics with the EUROPOWER PMP6000. It gives you 12 mic inputs.

Built-in Digital Effects Processor
The EUROPOWER PMP6000 comes equipped with dual 24-bit FX processors, giving you 100 mind-blowing digital effect presets such as delay, chorus, and reverb. Apply them to any channel, as well as to the monitors and main output. In case you're pulling double duty as sound engineer and performer, the FX processor features a footswitch jack for remote on/off. Of course, if you have treasured outboard gear you've grown attached to, the EUROPOWER PMP6000 can integrate them into the mix while leaving out the built-in FX processor.

Changing the Channels
The EUROPOWER PMP6000 mixer has excellent flexibility to accommodate whatever a performance requires. You get 8 channels for mics, guitars, and other mono instruments. Stereo channels 9-16 are designed to work in pairs as stereo channels, or independently for more mono instruments. All mono channels have 3-band EQ, switchable low-cut filter for eliminating infrasonics, and Clip LEDs to indicate when the input signal is too hot.

The FBQ Feedback Detection system automatically shows you which frequencies are causing feedback. Just touch the FBQ button and watch the red LEDs on the 7-band graphic EQ pinpoint show you which frequencies to adjust for optimized sound, without the feedback.

The Ins and Outs
Use the CD/Tape In RCA inputs to feed in external stereo signals from CD players or tape decks. The Voice Canceller switch eliminates the vocals from prerecorded music for instant karaoke applications.

CD/Tape Out RCA outputs send line-level signals from the mixer to a recording device. The left and right output 1/4" connectors can be used for a variety of purposes, including connecting more power amps. Connect monitor power amps or active monitor speakers to the Mon Sound output. Powered outputs on this mixer are available in professional Speakon-compatible format.

Small, Simple, Superb
Medium-sized events call for a lightweight, easy-to-use powered mixer. The EUROPOWER PMP6000 mixer is one of the most efficient, affordable mixers for the job, and is even suitable for use as pure analog mixer or as a pure power amplifier. With new technological advantages and incredible built-in features, it's easier than ever to lend exceptional sound quality to all kinds of public performances.

Features
  • Ultracompact 2 x 800W stereo powered mixer (1600W bridged mode)
  • Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance, and super-lightweight
  • Ultracompact design at nearly half the depth and weight of conventional powered mixers means no more lugging around dead weight
  • 20-channel mixer section features 12 mono and 4 stereo channels plus separate CD/Tape input/output
  • 2 studio-grade, 24-bit stereo FX processors with 100 presets including reverb, chorus, flanger, delay, pitch shifter, and various multi-effects
  • Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
  • 12 high-quality XENYX Mic Preamps with switchable +48V phantom power for condenser microphones
  • Effective, extremely musical 3-band EQ, switchable Pad, and Clip LEDs on all mono channels
  • Stereo 7-band graphic EQ allows precise frequency correction of monitor and main outputs
  • Voice Canceller function removes singer's voice from recordings for karaoke applications
  • Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode
  • Speaker Processing function adjusts frequency response to match professional speaker systems like BEHRINGER EUROLIVE series, etc.
  • Standby switch mutes all input channels during breaks while background music is provided via CD/Tape input
  • Breathtaking XPQ 3D stereo surround effect for more vitality and enhanced stereo image
  • Adjustable stereo 2-Track input for connecting external line sources
  • Multi-functional stereo preamp outputs for added flexibility
  • Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
  • High-quality components and exceptionally rugged construction ensure long- life
Specifications
  • Microphone Inputs
    Type: XLR, electronically balanced input circuit
    Mic E.I.N. (20Hz-20kHz): @ 0? source resistance: -134dB/136dB A-weighted, @ 50? source resistance: -131.5dB/134dB A-weighted, @ 150? source resistance: -129dB/155dB A-weighted
    Frequency response: < 10Hz-200kHz (-1dB), < 10Hz - > 200kHz (-3dB)
    Gain: +10dB, +60dB
    Max. input level: +12dBu @ +10dB gain
    Impedance approx.: 2.6k? balanced / 1.3k? unbalanced
    Signal-to-noise ratio: 109dB/112dB A-weighted (0dBu In @ +10dB gain)
    Noise (THD + N): 0.002%/0.00018% A-weighted

    Mono Line Inputs
    Type: 1/4" TS connectors, balanced
    Impedance: approx. 20k?
    Max. input level: +21dBu

    Stereo Line Inputs
    Type: 1/4" TRS connectors, unbalanced
    Impedance: > 3.6k?
    Max. input level: +22dBu

    Equalizer
    Low: 80Hz/±15dB
    Mid: 100Hz-8kHz/±15dB
    High: 12kHz/±15dB

    2-Track Input
    Type: RCA
    Impedance approx.: 3.6k?

    Preamp Outputs
    MAIN:
    Type: 1/4" TS connectors, unbalanced
    Impedance: approx. 150?, unbalanced
    Max. output level: +21dBu

    Monitor
    Type: 1/4" TS connectors, unbalanced
    Impedance: approx. 150?, unbalanced
    Max. output level: +21dBu

    Stereo Outputs
    Type: 1/4" TRS connectors, unbalanced
    Impedance: approx. 150?, unbalanced
    Max. input level: +21dBu
    Type: RCA
    Impedance: approx. 1k?
    Max. input level: +21dBu

    Loudspeaker Outputs
    Type: Professional loxking connector
    Load impedance:
    MAIN L/R: 4 - 8?
    MONITOR/MAIN MONO: 4 - 8?
    MAIN MONO/MAIN MONO: 4 - 8?
    BRIDGE: 8 - 16?

    DSP
    Converter: 24-bit Delta-Sigma, 64/128-times oversampling
    Dynamic:s D/A 90dB
    Sampling rate: 46.875kHz
    Delay Time: max. 5 secs
    Signal run time (Line In > Line Out): approx. 1.5ms

    Display
    Type: 2 x 2-digit, 7-segment LED

    Output Power
    RMS @ 1% THD, both channels driven:
    8? per channel: 300W
    4? per channel: 600W
    RMS @ 1% THD, bridged mode: 8? 1200W
    Peak Power, both channels driven:
    8? per channel: 400W
    4? per channel: 800W
    Peak Power, bridged mode: 8? 1600W

    Power Supply
    Mains voltage
    USA/Canada: 120V, 60Hz
    Fuse 100: - 120V T 10 A H 250V
    Fuse 220: - 240V T 6.3 A H 250V

    Power Consumption
    Power consumption: 1050W
    Mains connector: IEC standard receptacle

    Dimensions/Weight
    Dimensions (WxHxD): 23-1/2" x 4-7/8" x 19-1/2", 596mm x 122mm x 496mm
    Weight: 10.4kg/22.9 lb.
Warranty
MANUFACTURER'S WARRANTY
1 year warranty. 3 year warranty if registered within 90 days of purchase.


GUITAR CENTER'S PRO COVERAGE
Pro Coverage gives you added warranty protection for your new gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Read More.

Pro Coverage includes
  • Accidental damage protection (new gear only)
  • Expedited repair
  • Free shipping (for returns or repairs)
  • 100% coverage for commercial use
  • Extended return period
  • Extended price protection
  • No lemon guarantee
  • Free transfer of coverage to a new owner
  • Repair costs covered for up to three years from date of purchase
  • Repair authorization-toll-free by phone or via the web
  • Customer Reviews
Loading....

Review Snapshot

by PowerReviews
BehringerEUROPOWER PMP6000 20-Channel Powered Mixer
 
4.0

(based on 8 reviews)

Ratings Distribution

  • 5 Stars

     

    (6)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (2)

Reviewed by 8 customers

Displaying reviews 1-8

Back to Top

 
1.0

no available parts or repair facilities if mixer goes bad.

By Sunny

from sacramento Ca

About Me Professional Musician

Pros

    Cons

    • Breaks Easily

    Best Uses

      Comments about Behringer EUROPOWER PMP6000 20-Channel Powered Mixer:

      only performed at 2 places and mixer went bad. gave it for repairs but was returned with the comment that the parts are no longer available from behringer. waste of money. will never recommend this to any one.

      Comment on this reviewHelp Icon

      (2 of 2 customers found this review helpful)

       
      5.0

      Hit Concrete

      By robert tackett

      from AZ

      Comments about Behringer EUROPOWER PMP6000 20-Channel Powered Mixer:

      Prior to using this I was using a Yamaha Stagepas 500 for acoustic/ vocals, but ran into times I was doing full band performances, so needed more power and input options. I saw this board advertised online a, and found a used one at a GC out of state. It was beat up a bit when it came in at the local store, and the sales person didn't want to sell it to me because of its issues, but I bought it anyway along with a couple of used passive Behringer speakers they had in the store. My performance sound quality took a huge jump up. I don't know if I'll ever sell it. Anyway, two days ago I knocked it out of the back of my SUV prior to going to do a non pay gig; a house party for my niece. It hit the concrete. Very painful sound to hear. Upon inspection, it didn't look any worse than when I originally bought it. I don't know why, but I set everything up before powering it up (hopeless optimous I guess). Getting to the poing here, it powered up just like it always did for me, and sounded the best it ever did, though I don't recommend you dropping yours to upgrade your sound quality. I can't speak for everyone who has one, but for me, I find it easy to use, great sounding, and durable.

      Comment on this reviewHelp Icon

      (4 of 4 customers found this review helpful)

       
      5.0

      Lotta mixer for the $

      By Mike Szymusiak

      from San Diego, Ca

      Comments about Behringer EUROPOWER PMP6000 20-Channel Powered Mixer:

      First piece of Behringer gear I purchased and needless to say I am thoroughly impressed. Packed full of features, effects are really decent, quite, nice amount of power. Built like a tank. From what I have seen for powered mixers on the market this has them all beat especially for the money,power and features. I also own a Yamaha EMX512SC powered series, this blows it out of the water. Right now the Behringer is better priced, can't say enough about this board for the money and quality. Thanks again to Geoff Turner at San Diego Guitar Center he ALWAYS steers me in the right direction!

      Comment on this reviewHelp Icon

      (5 of 5 customers found this review helpful)

       
      5.0

      leaving the bigger eqmt. at home

      By charlie

      from chico, ca.

      Comments about Behringer EUROPOWER PMP6000 20-Channel Powered Mixer:

      started leaving the bigger mixer and amps at home. this mixer/amp can handle small to medium rooms, i add 1 stereo power amp to run subs/monitors and where all set. of course if bands require more than 12 xlr inputs i bring out the big mixer and use the pmp6000 for monitors and it does a great job. its well worth the bux and more. if you compare it to yamaha or peavey (12 xlr)its like half the price and sounds as good or better. so if your looking for a powered mixer,unless you get the yorkville powerhouse20(over $2000), this is a great way to go. i highly recommend the pmp6000 for price, sound, and quility, you can't beat it.

      Comment on this reviewHelp Icon

      (1 of 8 customers found this review helpful)

       
      1.0

      hop yours does not need parts

      By bill lint

      from st paul MN

      Comments about Behringer EUROPOWER PMP6000 20-Channel Powered Mixer:

      they changed the warehouse sales to less locations I am still waiting for my part back order to be found in a storage box

      Comment on this reviewHelp Icon

      (11 of 12 customers found this review helpful)

       
      5.0

      Professional Audio

      By Scott Bartnett

      from Surf City, NC

      Comments about Behringer EUROPOWER PMP6000 20-Channel Powered Mixer:

      I've uses Behringer products for nearly a decade now. DO NOT LET THE PRICE TAG FOOL YOU. Behringer products are pro quality. So far this mixer we recently purchased has gone beyond my expectations for value. The PMP 6000 not only gave our church band more volume power, but with the sweepable mid-range EQ, dual FX channels, and the extra instrument/mic channels our overall sound has definitly been upgraded at a very fair price. The thing looks great too.

      Comment on this reviewHelp Icon

      (18 of 18 customers found this review helpful)

       
      5.0

      loud and clean

      By John

      from Lincroft NJ

      Comments about Behringer EUROPOWER PMP6000 20-Channel Powered Mixer:

      I recently purchased the PMP6000 and I cant believe how loud and clean it is. I am running B1520 speakers and I am very impressed with Behringer. I have owned Yamaha speakers in the past, and they dont even come close to sounding as good as this system. I was concerned about buying powered mixers because some have a tendency to over heat. I hope this Class-D feature will keep the show goin. The only CON. I am not very impressed with the effects. Specifically the delay, not much flexability there. Other than that its a great board.

      Comment on this reviewHelp Icon

      (42 of 44 customers found this review helpful)

       
      5.0

      Very Good!

      By Larry

      from Sturgis, MI

      Comments about Behringer EUROPOWER PMP6000 20-Channel Powered Mixer:

      I had the previous model PMP5000 and like the layout of the mixer, but something was going wrong with the amp so I purchased the PMP6000 which had the same layout. I've only use this mixer once so far for DJ'ing and let me tell you this mixer does a great job. Very easy to use and I get no "hiss" like I did with the earlier model.

      Comment on this reviewHelp Icon

      Displaying reviews 1-8

      Back to Top

      You are changing the Ship-To country.

      Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.