Power amps have always been heavy, mainly because of their massive transformers and heat sinks. Our new EPX Series amps are based on groundbreaking switch-mode power supply technology, which eliminate... Click To Read More About This Product
Power amps have always been heavy, mainly because of their massive transformers and heat sinks. Our new EPX Series amps are based on groundbreaking switch-mode power supply technology, which eliminates the heavy transformer. As a result, these amps weigh about 40% less than their conventional counterparts. In fact, the EPX4000 is just 22.3 lb. (10.1 kg), so you can practically lift it with just one finger. Best of all, EPX Series amps are super-reliable and provide even tighter bass performance than their predecessors, since they can deliver ultra-high peak currents on demand.
In a Class of Their Own
The secret to the EPX Series™ incredible power-to-weight ratio is the use of a switch-mode power supply combined with Class-H topology. Because they work on demand, instead of operating continuously at full power, switch-mode power supplies are much more efficient than traditional power supplies. And since they don™t require the massive transformers and heat sinks typically found in conventional power amps, they are significantly smaller and lighter, yet still deliver ample power.
Think of a Class-H amp as being similar to a car with two engines (in amps, they are called œrails). One engine runs all the time. The other runs only when musical peaks demand the extra power output. An EPX Class-H amp only generates a fraction more power than is immediately needed, while the output stage operates at its maximum efficiency all the time. And just like in today' hybrid cars, the efficiency of this dual system is far greater than having just one engine or rail that has to operate continuously.
Accelerated Transient Response Delivers the Knockout Punch
It takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That' called Transient Response and it' the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of Behringer' circuitry, EPX amps can react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.
BEHRINGER didn™t invent Class-H technology, but Behringer' R&D Department has been working for years to perfect their own version, creating lightweight amps that run cool and achieve our goal of Accelerated Transient Response.
Everything You Need
The simple front panel controls of these amps give you all of your sound' vital signs at a glance. After pressing the Power Button, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials, as well as CLIP LEDs that notify you when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.
The EPX Series™ INPUTs accept balanced XLR, ¼ " TRS, and unbalanced ¼ " TS and RCA connections. Take your pick of professional locking speaker outputs or touch-proof binding posts to securely connect speakers.
A panel of switches located on the back off ers an array of cool options applicable to both channels. The switchable Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the amp is being overdriven into œclipping and instantaneously reduces the input level just enough to avoid clipping distortion.
The rear panel also contains a switch that allows you to put these amps to work in mono, stereo (two-channel mode) or bridge mode, which is always mono. A built-in CROSSOVER switch lets you put the amp into biamp mode, which sends low-frequency content (< 100 Hz) to the CH2 Output and the high-frequency component to CH1 automatically, no external hardware required.
BEHRINGER' EPX Series amps are built for the working musician. They are much lighter than conventional power amps, pack massive power, feature built-in crossover and limiter circuits, and can withstand the rigors of the road. Plus their light price tag will leave money in your pocket to buy more stuff to amplify!
2 x 2,000 watts into 2 Ohms; 2 x 1,200 watts into 4 Ohms; 4,000 Watts into 4 Ohms (bridge mode)
ATR (Accelerated Transient Response) technology for ultimate punch and clarity
Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
Switchable limiters offer maximum output level with reliable overload protection
Detented gain controls for precise setting and matching of sensitivity
Precise Power, Signal and Limit LEDs to monitor performance
XLR , 1/4'' TRS and RCA input connectors for compatibility with any source Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
Built-in subwoofer/satellite crossover for more flexibility
Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
"Back-to-front" ventilation system including air filter for reliable operation
'"Built-like-a-tank"', impact-resistant, all-steel 2U rackmount chassis
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Stereo Mode (both channels driven)
8Ohm per channel, stereo 530W
4Ohm per channel, stereo 870W
2Ohm per channel, stereo 1,440W
8Ohm / 1 kHz @ 0.1% THD 1,800W
4Ohm / 1 kHz @ 1% THD 3,000W
Stereo Mode (both channels driven)
8Ohm per channel, stereo 670W
4Ohm per channel, stereo 1,220W
2Ohm per channel, stereo 2,080W
8Ohm bridge mode 2,450W
4Ohm bridge mode 4,000W
Input Sensitivity: 1 V
Frequency Response 20 Hz - 20 kHz, +0/-1 dB
Voltage Gain 35 dB
Damping Factor > 300 @ 8Ohm
Input impedance 10 kOhm unbalanced, 20 kOhm balanced
Signal-to-Noise > 100 dBA
Front POWER switch GAIN control (channel 1 and 2)
Rear MODE switch X-over Switch, BRIDGE MODE switch
POWER: Blue LEDs
CLIP (per channel): Blue LEDs
PROT (per channel): Blue LEDs
SIGNAL (per channel): White LEDs -20dB-10dB
SIGNAL (per channel): White LEDs -10dB 0dB
Inputs: Balanced XLR, 1/4" TRS , RCA
Outputs: Speakon and œtouch-proof™™ binding posts
Circuit protection: Cooling Continuously variable speed fan, back to front airflow
Amplifier protection Full short circuit, open circuit, thermal,
ultrasonic, RF protection. Stable into reactive or mismatched loads
Output circuit type: Class H
Power supply / Voltage (Fuses)
USA / Canada: 120 V, 60 Hz (T 30 A H 250 V)
UK / Australia: 240 V, 50 Hz (T 15A H 250 V)
Europe: 230 V, 50 Hz (T 15 A H 250 V)
Japan: 100 V, 50-60 Hz (T 30 A H 250 V)
Power consumption: 4500W
Mains connector: Standard IEC receptacle
Dimensions (H x W x D) 3.46 x 19.01 x 14.68"
88 x 483 x 373 mm
Weight 22.26 lb. / 10.10 kg
Reviewed by 1 customer
Displaying review 1
Comments about Behringer EUROPOWER EPX4000 Power Amp:
i bought this new amp cause it was lighter then the older model. but after having it for about one month it up an stopped working! all we had going through our mixer was 1 bass 1 vocal and was only powering 2 4ohm speakers in stereo and not pushing this amp in any way. make sure to buy the warranty offerd by guitar center when buying this item im sure u will need it !!!!!!!! good luck
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.