Packed with an incredible array of truly professional features, the 12" Behringer EUROLIVE B915NEO 2-way speaker—like the entire series of EUROLIVE NEO loudspeakers—is a brute providing extreme levels... Read More
Packed with an incredible array of truly professional features, the 12" Behringer EUROLIVE B915NEO 2-way speaker—like the entire series of EUROLIVE NEO loudspeakers—is a brute providing extreme levels of low-end punch, with the kind of high-fidelity definition and clarity typically reserved for a much larger system. This powerful new speaker systems outperforms its predecessor, and weighs 30% less.
Class-D Works its Magic
What's the secret? The state-of-the-art EUROLIVE B915NEO active loudspeaker is powered by a custom-engineered Class-D amplifier, which drives the low- and high-frequency transducers to their limits without even the slightest hint of distortion. Best of all, Behringer's Class-D amplifiers use switch-mode power supplies, which don't need massive transformers and heat sinks, so they provide a much better power-to-weight ratio than many otheractive systems.
Put simply, the cool-running Behringer EUROLIVE B915NEO system is much lighter than its predecessor, making it ultra-easy to transport and set up. The no-compromise design means you get solid punchy bass, along with powerful mids and pristine highs that will keep the party going all night long.
Digital Signal Processing
From the instant the signal enters the Behringer EUROLIVE B915NEO system, the digital processor takes over, ensuring the highest possible signal integrity. Much more than just selective EQ enhancement, the 24-bit DSP (Digital Signal Processor) circuitry analyzes the signal and intelligently applies specific filters to actually improve the sound quality. It's like having a tiny sound guy inside each enclosure (with all the best gear), monitoring the input and output signals, dialing in the perfect EQ, and constantly making subtle adjustments to the crossover, compressor/limiter, and more.
The transducer (speaker) is the only part of a sound system you actually hear, so Behringer doesn't cut any corners. They wind their own voice coils, process the paper pulp into cones and even machine the frames and back plates. This enables Behringer to control the quality, and frankly, make better components&mdeash;like the neodymium woofers and 1.75" neodymium titanium diaphragm compression drivers deployed in the Behringer EUROLIVE B915NEO loudspeaker.
Power to Spare
Cutting-edge technology and high-fidelity transducers are not all it takes to get your message across—you need power, and lots of it. At the heart of the Behringer EUROLIVE B915NEO is a bi-amped 1,200-Watt engine capable of driving the speakers to their very limit, without the slightest hint of distortion. When it comes to pure output power, the Behringer EUROLIVE B915NEO loudspeaker will simply blow you away with its massive punch, smooth mids, and articulate top-end.
Instant PA System
With just a single Behringer EUROLIVE B915NEO loudspeaker system and one or two dynamic microphones, you can set up an instant sound system. The onboard mixer features a LEVEL control for each input and a dual-band master EQ, complete with an adjustable LOW CUT filter to help eliminate annoying breath pops and mic handling noise. An additional filter, called the CONTOUR, allows you to select SPEECH (for enhanced voice intelligibility), or MUSIC for the broader frequency range required for the high-fidelity reproduction of music. And, if you need more coverage, you can chain together as many as you like via the convenient LINE OUT XLR connector.
When laid on its side, the Behringer EUROLIVE B915NEO loudspeakers tilt to the ideal angle for onstage monitor wedge applications. Hookup is simple, requiring only a single XLR cable from the monitor send on the mixing console and, of course, power. Additional monitors can be chained together via the XLR LINE OUT jack on the loudspeaker's rear panel.
More Than Just a PA Loudspeaker
The Behringer EUROLIVE B915NEO loudspeaker also makes an excellent onstage monitor for keyboards, acoustic guitars, or any line-level instrument for that matter. You can plug your instrument into MIC/LINE 1 and use the MIC/LINE 2 input to connect the monitor signal from the PA mixing console, so that you can also hear the other members of your band. This opens up lots of possibilities.
If you want to use more than two instruments, you will need a submixer to mix down the signals. You will need a special adapter to convert a standard 1/4" TS cable to XLR, or a direct injection box.
Reviewed by 3 customers
Displaying reviews 1-3
I listened to a number of speakers while making this decisision. I was wanting the Bose L1, but after I got (and heard) these, I can assure you that these have an outstanding sound (compared to the other's that were substantially MORE $ than these. These have incredible sound (both low end and high), for a very reasonable price.
I've had these for about a year now. They push pretty good and are a good set of beginner speakers for the money. I would buy again
I just bought 2 of these speakers at GC. I've had them for just 2 weeks and I have DJ'd 2 parties. These bad boyz wont let you down!! Because they are powered.. you can let them rock out by themselves or hook it up thru a mixer. Either way will create a great sound. Fairly E-Z, basic set-up is good. Some of the other features (Contour, voice-vs-music, etc) need the right conditions to see how they sound & hold up. If your looking for a quality powered speaker that wont break you wallet...THESE ARE THE SPEAKERS YOU WANT! GET'EM
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.