Item # 108872599 | Customer Ratings: ( 5 Based on 2 reviews)

Print this page

  1. Select the information you'd like to print out.
  2. Cancel
Behringer iNUKE NU3000 Power Amp
Use Add to Cart below to have it shipped to you, or to a store near you.
  • Store
  • Availability
Guaranteed Lowest Price
Pickup In Store

An ultra-lightweight, high-density 3000-watt power amplifier.

The iNUKE NU3000, like the rest of the iNUKE Series power amplifiers, packs massive amounts of output power into an exceptionally lightweight, rackmountable package. Behringer's revolutionary high-density Class-D technology combined with ultra-efficient switch-mode power supplies ensures this feather-light powerhouse will drive your rig effortlessly for many years to come.

Superb transient response
Behringer spent years fine-tuning the high-density Class-D technology that gives the iNUKE Series its oomph. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of the circuitry, this amp reacts instantly to even the most demanding electronic bass impulses.

When this amazing amplifier technology is combined with Behringer's state-of-the-art switching-mode power supplies, this amplifiers= provides tremendous punch. And, because it is so much more efficient than conventional designs, it runs cooler and doesn't require the massive heat sinks and heavy toroid transformers typically associated with other conventional counterparts.

Sublimely simple operation
The front panel controls and indicators provide your system's vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as clip LEDs to indicate when the signal is distorted and you need to reduce the input signal.

The rear panel is just as elegant, with combo XLR and 1/4" TRS input connectors making the iNUKE NU3000 compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers.The rear panel is also where you'll find the switches that enable iNUKE amps to work in either dual mono, stereo or mono bridge mode. A built-in CROSSOVER switch enables the amp to operate in bi-amp mode, sending low frequency content to passive subwoofers, while the high-frequency output is channeled to full-range loudspeakers (CH1>100 Hz / CH2<100 Hz or FULLRANGE). Flick the LIMITER ON/OFF switch to activate the built-in overload protection, or turn it off if you're feeling lucky.

Sporting massive output ratings, lightweight Class-D technology, an equally lightweight price tag, and all the amenities a professional audio engineer could ask for, the BEHRINGER iNUKE NU3000 amp is a serious amps for the most demanding applications.

Behringer iNUKE NU3000 Power Amp Features:

  • Delivers 2 x 1500 Watts into 2 Ohms; 2 x 880 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) and weighs less than 7 lb. / 3.3 kg
    Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup
    Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
    "Zero-Attack" limiters offer maximum output level with reliable overload protection
    Built-in Subwoofer/Satellite crossover for perfect subwoofer operation
    Detented and illuminated gain controls for precise level setting
    Precise 4-segment Signal and Limit LEDs to monitor performance
    XLR and 1/4" TRS combination input connectors for compatibility with any source
    Professional twist-lock speaker connectors for ultimate reliability
    Independent DC, LF, and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
    "Back-to-front" ventilation system prevents thermal buildup for reliable operation
    High-quality components and exceptionally rugged construction ensure long life

Behringer iNUKE NU3000 Power Amp Specifications:

  • Maximum output power

    8Ω per channel, stereo: 400W
    4Ω per channel, stereo: 880W
    2Ω per channel, stereo: 1500W

    Bridged mono
    8Ω: 1500W
    4Ω: 3000W


    Front: Power switch, Gain controls (channels A and B)
    Rear: Mode Switch (bridge/stereo/mono), Crossover switch (fullrange/100Hz)

    Power: Amber/red backlit illuminated gain controls
    Limit (per channel): 0dB, full scale
    Signal (per channel): -24, -12, -6dB

    Inputs: 2 x combo jacks
    Input impedance: 10 kΩ unbalanced, 20 kΩ balanced
    Outputs: 2 x locking-style professional speaker connectors
    Output circuit type: Class D
    Distortion: <0.2%
    Frequency response: 20Hz to 20kHz, +0/-1dB
    Damping factor: >160 @ 8Ω
    Signal-to-Noise: >100dB

    Circuit Protection
    Cooling: Continuously variable speed fan, Back-to-front air flow
    Amplifier protection: Thermal and DC protection Stable into reactive or mismatched loads
    Load protection: On/off muting, DC-fault power supply shutdown

    Power Supply, Voltage Fuse
    USA: 120V~, 60Hz (T10A H250V)
    Power consumption @ 2Ω: 350W
    Power consumption @ 4Ω: 170W
    Mains connector: Standard IEC receptacle

    Dimensions: (appr. 3.7" x 19" x 9.1"/94mm x 482mm x 230 mm)
    Weight: 6.6 lb./3.0 kg

Behringer iNUKE NU3000 Power Amp

3 Years

1 year warranty. 3 year warranty if registered within 90 days of purchase.

Get your gear covered!

Now you can get added warranty protection for your new gear. Pro Coverage steps in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program offers you UPGRADED COVERAGE if your product ever fails!

Pro Coverage includes:

  • Accidental damage protection (new gear only)
  • Expedited Repair
  • Free Shipping (for returns or repairs)
  • 100% Coverage for Commercial Use
  • Extended Return Period
  • Extended Price Protection
  • No Lemon Guarantee
  • Free Transfer of Coverage to a new owner
  • Repair Costs Covered for up to 3 years from date of purchase
  • Repairs Can Be Authorized Toll-Free by Phone or the via the web
Product Reviews
(Based on 2 reviews)
Sort reviews:
Viewing Reviews 1 - 2 of 2

    As reviewed by Telesford Esplana on 9/2/2013

    I had purchased this amplifier to replace an aging QSC GX5. I used the Behringer iNuke as part of a component-bass amplifier rig to power my GK cabinets. If anything puts a power amplifier to the test, it would be lots of low-end frequencies driving subwoofers. This amplifier easily powered my 4x10 GK 410MBE bass cabinet, no problem! The cab is rated at 600W @ 8 ohms. I just came off 2 month cross-country tour consisting of about 40 shows. Most nights, playing 3 one-hour sets using this power amp. All I have to say is, BEHRINGER ABSOLUTELY DELIVERED. Not only did the power amp drive my bass cabinet with ease, this unit stood up to the rigours of constantly being loaded and unloaded out of the truck. It is kept safe in a gator rack case of course. Still going strong and not a single issue, my NU3000 is now powering two 4x10 GK cabinets flawlessly. Thats a total of 1200W @ 4 OHMS!! This amp shows absolutely no signs of stopping. Disregard old misconceptions of this brand because Behringer makes a great product that not only fit my needs perfectly, but also stands up to the gear-fatuiging elements of tour. This thing is AWESOME! Highly recommended.

    1 of 1 people found this review helpful.
    Was this review helpful?
  • Great line of amps

    As reviewed by Jake Hall on 8/23/2012

    People will have bad thoughts about this amp because the name thats on the front. Behringer has stepped up their game on this one though. I was using QSC 1450s 2450s & 5050s. I bought these inukes and they blow the qsc's out of the water. the fans on these things push a lot of air so you won't have heating problems, not to mention the qsc's are A LOT heavier. I run these through a DBX driverack and they sound great. Possibly the best PA buy I've made.

    1 of 2 people found this review helpful.
    Was this review helpful?
Questions about the iNUKE NU3000 Power Amp (108872599)

PO Box 4769
Westlake Village, CA 91359
Order #: (if applicable)  * Denotes Required Field
*First Name:
*Last Name:
Click to add file attachment
File Upload 5mb limit