Ultra-lightweight, high-density 1000W power amplifier with DSP control and USB interface.
BEHRINGER's iNUKE NU1000DSP, just like the rest of the iNUKE Series power amplifiers, packs massive amounts of output power into an exceptionally lightweight, rackmountable package. Behringer's revolutionary high-density Class-D technology, combined with an ultra-efficient switch-mode power supply, ensures this feather-light powerhouse will drive your rig effortlessly for many years to come.
Superb transient response
BEHRINGER spent years fine-tuning the high-density Class-D technology that gives the iNUKE Series its oomph. Because they are created with carefully selected transistors with extremely high slew rates and optimizing other proprietary parts of the circuitry, the iNuke NU1000DSP amp reacts instantly to even the most demanding electronic bass impulses.
When this amplifier technology is combined with BEHRINGER's switching-mode power supply, it gives the iNUKE NU1000DSP amplifier its tremendous punch. Just like the rest of the iNUKE Series, they are so much more efficient than conventional designs, so they run cooler, and don’t require the massive heat sinks and heavy toroid transformers typically associated with their conventional counterparts.
Sublimely simple operation
The front panel controls and indicators provide your system's vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as clip LEDs to indicate when the signal is distorted and you need to reduce the input signal.
The rear panel is just as elegant, with combo XLR and 1/4" TRS input connectors. This makes the iNUKE NU1000DSP compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you'll find the switches that enable the iNUKE NU1000DSP to work in either dual mono, stereo, or mono bridge mode. A built-in CROSSOVER switch enables the amp to operate in biamp mode, sending low-frequency content to passive subwoofers, while the high-frequency output is channeled to full-range loudspeakers (CH1>100 Hz/CH2<100 Hz, or FULLRANGE).
iNUKE DSP
For sound engineers requiring high-level control capability, the iNUKE DSP Series amplifiers come ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP functions include a sophisticated delay for delay-line loudspeakers, crossover, EQ (eight parametric, two dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC. The iNUKE NU1000DSP, just like all iNUKE DSP models, can also be set up, controlled, and monitored via the front panel USB connector.
Value
Sporting a massive output rating, lightweight Class-D technology, an equally lightweight price tag, and all the amenities a professional audio engineer could ask for, the iNUKE NU1000DSP amp is a serious amp for demanding applications.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Behringer iNUKE NU1000DSP Power Amp Features:
- Delivers 2 x 500W into 2O; 2 x 300Ws into 4O; 1000Ws into 4O (bridge mode) and weighs less than 8lb. / 3.5kg
Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup
Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
High-performance DSP and 24-bit/96kHz converters deliver ultimate signal integrity and extreme dynamic range
DSP section features sophisticated delay, crossover (3 filter types, up to 48dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing, and lockable security settings
Front panel LCD display enables setup and adjustment without PC
Can be set up, controlled and monitored via front panel USB connector. Powerful remote software downloadable at vendor website
"Zero-Attack" limiters offer maximum output level with reliable overload protection
Built-in Subwoofer/Satellite crossover for perfect subwoofer operation
Detented and illuminated gain controls for precise level setting
Precise 4-segment Signal and Limit LEDs to monitor performance
XLR and 1/4'' TRS combination input connectors for compatibility with any source
Professional twist-lock speaker connectors for ultimate reliability
Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
"Back-to-front" ventilation system prevents thermal buildup for reliable operation
Behringer iNUKE NU1000DSP Power Amp Specifications:
- Output Power
Stereo
8O per channel, stereo: 160W
4O per channel, stereo: 320W
2O per channel, stereo: 530W
Bridged Mono
8O: 570W
4O: 1050W
RMS
Stereo
8O per channel, stereo: 110W
4O per channel, stereo: 210W
2O per channel, stereo: 380W
Bridged mono
8O: 430W
4O: 750W
System
Controls
Front: Power switch, Gain controls (channels A and B) DSP section rotary push-encoder, Buttons for Process, Setup, Up/Down, Exit
Indicators
Power: Amber backlit illuminated gain controls
Limit (per channel): 0dB, full scale
Signal (per channel): -24, -12, -6dB
Digital Signal Processing (DSP)
Display: LCD 128 x 32, amber backlit
Digital delay function (per channel): 0-300 ms
Digital crossover function: 3 filter types, up to 48dB/octave
Digital EQ function (per channel): 8-band parametric, 2-band dynamic equalizer
Digital dynamics function (per channel): Zero attack limiter (peak)
Presets: 20 total presets, 19 user-definable
Connectors
Inputs: 2 x combo jacks
Input impedance: 10 kO unbalanced, 20 kO balanced
Outputs: 2 x locking-style professional speaker connectors
Output circuit type: Clase D
Distortion: <0.1%
Frequency response: 20Hz to 20kHz, +0 / -1dB
Damping factor: >155 @ 8O
Signal-to-noise: >98dB
USB: Front-panel USB connector type B for remote control of DSP section
Circuit Protection
Cooling: Continuously variable speed fan, Back-to-front air flow
Amplifier protection: Thermal and DC protection, Stable into reactive or mismatched loads
Load protection: On/off muting, DC-fault power supply shutdown
Power
Power Supply: 120 V~, 60Hz (T 6.3 A H 250V)
Power consumption@2O: 150W
Power consumption@4O: 70W
Mains connector: Standard IEC receptacle
Dimensions/Weight
(HxWxD): Appr. 3.7" x 19" x 9.1" / 94mm x 482mm x 230mm
Weight: Appr. 6.4lb./2.9kg
Behringer iNUKE NU1000DSP Power Amp
One year parts and labor warranty.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
