Item # H73594

Print this page

  1. Select the information you'd like to print out.
  2. Cancel
Behringer iNUKE NU1000DSP Power Amp
Use Add to Cart below to have it shipped to you, or to a store near you.
  • Store
  • Availability
Guaranteed Lowest Price
Pickup In Store

Ultra-lightweight, high-density 1000W power amplifier with DSP control and USB interface.

BEHRINGER's iNUKE NU1000DSP, just like the rest of the iNUKE Series power amplifiers, packs massive amounts of output power into an exceptionally lightweight, rackmountable package. Behringer's revolutionary high-density Class-D technology, combined with an ultra-efficient switch-mode power supply, ensures this feather-light powerhouse will drive your rig effortlessly for many years to come.

Superb transient response
BEHRINGER spent years fine-tuning the high-density Class-D technology that gives the iNUKE Series its oomph. Because they are created with carefully selected transistors with extremely high slew rates and optimizing other proprietary parts of the circuitry, the iNuke NU1000DSP amp reacts instantly to even the most-demanding electronic bass impulses.

When this amplifier technology is combined with BEHRINGER's switching-mode power supply, it gives the iNUKE NU1000DSP amplifier its tremendous punch. Just like the rest of the iNUKE Series, they are so much more efficient than conventional designs, so they run cooler, and don't require the massive heat sinks and heavy toroid transformers typically associated with their conventional counterparts.

Sublimely simple operation
The front panel controls and indicators provide your system's vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with signal LEDs that light when a signal is present, as well as clip LEDs to indicate when the signal is distorted and you need to reduce the input signal.

The rear panel is just as elegant, with combo XLR and 1/4" TRS input connectors. This makes the iNUKE NU1000DSP compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you'll find the switches that enable the iNUKE NU1000DSP to work in either dual mono, stereo, or mono bridge mode. A built-in CROSSOVER switch enables the amp to operate in biamp mode, sending low-frequency content to passive subwoofers, while the high-frequency output is channeled to full-range loudspeakers (CH1>100 Hz/CH2<100 Hz, or FULLRANGE).

For sound engineers requiring high-level control capability, the iNUKE DSP Series amplifiers come ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP functions include a sophisticated delay for delay-line loudspeakers, crossover, EQ (eight parametric, two dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC. The iNUKE NU1000DSP, just like all iNUKE DSP models, can also be set up, controlled, and monitored via the front panel USB connector.

Sporting a massive output rating, lightweight Class-D technology, an equally lightweight price tag, and all the amenities a professional audio engineer could ask for, the iNUKE NU1000DSP amp is a serious amp for demanding applications.

Behringer iNUKE NU1000DSP Power Amp Features:

  • Delivers 2 x 500W into 2Ω; 2 x 300Ws into 4Ω; 1000Ws into 4Ω (bridge mode) and weighs less than 8lb. / 3.5kg
    Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup
    Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low-power consumption
    High-performance DSP and 24-bit/96kHz converters deliver ultimate signal integrity and extreme dynamic range
    DSP section features sophisticated delay, crossover (3 filter types, up to 48dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing, and lockable security settings
    Front panel LCD display enables setup and adjustment without PC
    Can be set up, controlled and monitored via front panel USB connector (Powerful remote software downloadable at vendor website)
    "Zero-Attack" limiters offer maximum output level with reliable overload protection
    Built-in Subwoofer/Satellite crossover for perfect subwoofer operation
    Detented and illuminated gain controls for precise level setting
    Precise 4-segment Signal and Limit LEDs to monitor performance
    XLR and 1/4'' TRS combination input connectors for compatibility with any source
    Professional twist-lock speaker connectors for ultimate reliability
    Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
    "Back-to-front" ventilation system prevents thermal buildup for reliable operation

Behringer iNUKE NU1000DSP Power Amp Specifications:

  • Output Power
    8Ω per channel, stereo: 160W
    4Ω per channel, stereo: 320W
    2Ω per channel, stereo: 530W

    Bridged Mono
    8Ω: 570W
    4Ω: 1050W

    8Ω per channel, stereo: 110W
    4Ω per channel, stereo: 210W
    2Ω per channel, stereo: 380W

    Bridged mono
    8Ω: 430W
    4Ω: 750W

    Front: Power switch, Gain controls (channels A and B) DSP section rotary push-encoder, Buttons for Process, Setup, Up/Down, Exit

    Power: Amber backlit illuminated gain controls
    Limit (per channel): 0dB, full scale
    Signal (per channel): -24, -12, -6dB

    Digital Signal Processing (DSP)
    Display: LCD 128 x 32, amber backlit
    Digital delay function (per channel): 0-300ms
    Digital crossover function: 3 filter types, up to 48dB/octave
    Digital EQ function (per channel): 8-band parametric, 2-band dynamic equalizer
    Digital dynamics function (per channel): Zero attack limiter (peak)
    Presets: 20 total presets, 19 user-definable

    Inputs: 2 x combo jacks
    Input impedance: 10 kΩ unbalanced, 20 kΩ balanced
    Outputs: 2 x locking-style professional speaker connectors
    Output circuit type: Clase D
    Distortion: <0.1%
    Frequency response: 20Hz to 20kHz, +0 / -1dB
    Damping factor: >155 @ 8Ω
    Signal-to-noise: >98dB
    USB: Front-panel USB connector type B for remote control of DSP section

    Circuit Protection
    Cooling: Continuously variable speed fan, Back-to-front air flow
    Amplifier protection: Thermal and DC protection, Stable into reactive or mismatched loads
    Load protection: On/off muting, DC-fault power supply shutdown

    Power Supply: 120 V~, 60Hz (T 6.3 A H 250V)
    Power consumption@2Ω: 150W
    Power consumption@4Ω: 70W
    Mains connector: Standard IEC receptacle

    (HxWxD): Appr. 3.7" x 19" x 9.1" / 94mm x 482mm x 230mm
    Weight: Appr. 6.4lb./2.9kg

Behringer iNUKE NU1000DSP Power Amp

3 Years

1 year warranty. 3 year warranty if registered within 90 days of purchase.

Get your gear covered!

Now you can get added warranty protection for your new gear. Pro Coverage steps in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program offers you UPGRADED COVERAGE if your product ever fails!

Pro Coverage includes:

  • Accidental damage protection (new gear only)
  • Expedited Repair
  • Free Shipping (for returns or repairs)
  • 100% Coverage for Commercial Use
  • Extended Return Period
  • Extended Price Protection
  • No Lemon Guarantee
  • Free Transfer of Coverage to a new owner
  • Repair Costs Covered for up to 3 years from date of purchase
  • Repairs Can Be Authorized Toll-Free by Phone or the via the web
Voice your opinion! Be the first to review »
Questions about the iNUKE NU1000DSP Power Amp (H73594)

PO Box 4769
Westlake Village, CA 91359
Order #: (if applicable)  * Denotes Required Field
*First Name:
*Last Name:
Click to add file attachment
File Upload 5mb limit