Item # 485571 | Customer Ratings: ( 3 Based on 7 reviews)

Print this page

  1. Select the information you'd like to print out.
  2. Cancel
Behringer EUROPOWER PMP4000 16 Ch Powered Mixer w FX
Use Add to Cart below to have it shipped to you, or to a store near you.
  • Store
  • Availability
Guaranteed Lowest Price
Pickup In Store

1600W 16-channel powered mixer with multi-FX processor and FBQ Feedback Detection.

The Behringer EUROPOWER PMP4000 Powered Mixer (2 x 800W stereo, 1600W bridged mode) produces even more power than its predecessors while maintaining famously low weight and high efficiency. The EUROPOWER PMP4000 mixer employs Class-D technology including a switch-mode power supply, significantly reducing weight and heat. The 16-Channel Behringer PMP4000 offers 8 built-in XENYX mic preamps, 24-bit FX processor with 100 presets, and FBQ Feedback Detection.

What is Class-D Technology?
Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off, which significantly reduces power losses from the output devices given off as heat. Less heat means the amps don't need massive heat sinks, and that makes them lighter. This no-compromise design means the EUROPOWER PMP4000 mixer will deliver full power with incredible fidelity all night long, without the need for lengthy rest cycles.

When used in conjunction with switching-mode power supplies, which don't require huge and heavy transformers, Behringer's Class-D amplifiers provide tremendous dynamic punch and superior fidelity. The resulting speaker systems are much lighter, making them easy to transport and set up.

Massive Mono or Stunning Stereo
EUROPOWER PMP4000 gives you the choice of 2 x 800-watt stereo, 2 x 800-watt dual mono mode (giving you a mono version of the main signal through one powered output plus a mono version of all monitor send signals through the second powered input) or 1,600-watt bridged mono sound. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the EUROPOWER PMP4000 mixers can accommodate. This sonic versatility also makes it an excellent choice for churches, where vocals and stereo recordings often share face time.

Classic Control, State-of-the-Art Sound
Leave the mic preamps at home, because the quality of sound that was once only available in the studio is ready to go wherever you do. Built-in, boutique-caliber mic preamps with switchable +48V phantom power make it possible to use either dynamic or condenser mics with the EUROPOWER PMP4000. It gives you 8 mic inputs.

Built-in Digital Effects Processor
The EUROPOWER PMP4000 comes equipped with a 24-bit FX processor, giving you 100 mind-blowing digital effect presets such as delay, chorus, and reverb. Apply them to any channel, as well as to the monitors and main output. In case you're pulling double duty as sound engineer and performer, the FX processor features a footswitch jack for remote on/off. Of course, if you have treasured outboard gear you've grown attached to, the EUROPOWER PMP4000 can integrate them into the mix while leaving out the built-in FX processor.

Changing the Channels
The EUROPOWER PMP4000 mixer has excellent flexibility to accommodate whatever a performance requires. You get 8 channels for mics, guitars, and other mono instruments. Stereo channels 9-16 are designed to work in pairs as stereo channels, or independently for more mono instruments. All mono channels have 3-band EQ, switchable low-cut filter for eliminating infrasonics, and Clip LEDs to indicate when the input signal is too hot.

The FBQ Feedback Detection system automatically shows you which frequencies are causing feedback. Just touch the FBQ button and watch the red LEDs on the 7-band graphic EQ pinpoint show you which frequencies to adjust for optimized sound, without the feedback.

The Ins and Outs
Use the CD/Tape In RCA inputs to feed in external stereo signals from CD players or tape decks. The Voice Canceler switch eliminates the vocals from prerecorded music for instant karaoke applications.

CD/Tape Out RCA outputs send line-level signals from the mixer to a recording device. The left and right output 1/4" connectors can be used for a variety of purposes, including connecting more power amps. Connect monitor power amps or active monitor speakers to the Mon Sound output. Powered outputs on this mixer are available in professional Speakon-compatible format.

Small, Simple, Superb
Medium-sized events call for a lightweight, easy-to-use powered mixer. The EUROPOWER PMP4000 mixer is one of the most efficient, affordable mixers for the job, and is even suitable for use as pure analog mixer or as a pure power amplifiers. With new technological advantages and incredible built-in features, it's easier than ever to lend exceptional sound quality to all kinds of public performances.

Behringer EUROPOWER PMP4000 16 Ch Powered Mixer w FX Features:

  • Ultra-compact 2 x 800W stereo powered mixer (1600W bridged mode)
    Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance, and super-lightweight
    Ultra-compact design at nearly half the depth and weight of conventional powered mixers means no more lugging around dead weight
    16-channel mixer section features 8 mono and 4 stereo channels plus separate CD/Tape input/output
    Studio-grade, 24-bit stereo FX processors with 100 presets including reverb, chorus, flanger, delay, pitch shifter, and various multi-effects
    Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
    8 high-quality XENYX Mic Preamps with switchable +48V phantom power for condenser microphones
    Effective, extremely musical 3-band EQ, switchable Pad, and Clip LEDs on all mono channels
    Stereo 7-band graphic EQs allows precise frequency correction of monitor and main outputs
    Voice Canceler function removes singer's voice from recordings for karaoke applications
    Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode
    Speaker Processing function adjusts frequency response to match professional speaker systems like BEHRINGER EUROLIVE series, etc.
    Standby switch mutes all input channels during breaks while background music is provided via CD/Tape input
    Adjustable stereo Aux input for connecting external signal sources
    Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
    High-quality components and exceptionally rugged construction ensure long- life
    Conceived and designed in Germany

Behringer EUROPOWER PMP4000 16 Ch Powered Mixer w FX Specifications:

  • Microphone Inputs
    Type: XLR, electronically balanced input circuit
    Mic E.I.N. (20Hz-20kHz): @ 0Ω source resistance: -134dB / 136dB A-weighted, @ 50Ω source resistance: -131.5dB / 134dB A-weighted, @ 150Ω source resistance: -129dB / 155dB A-weighted
    Frequency response: < 10Hz-200kHz (-1dB), < 10Hz - > 200kHz (-3dB)
    Gain: +10dB, +60dB
    Max. input level: +12dBu @ +10dB gain
    Impedance approx.: 2.6kΩ balanced / 1.3kΩ unbalanced
    Signal-to-noise ratio: 109dB / 112dB A-weighted (0dBu In @ +10dB gain)
    Noise (THD + N): 0.002% / 0.00018% A-weighted

    Mono Line Inputs
    Type: 1/4" TS connectors, balanced
    Impedance: approx. 20kΩ
    Max. input level: +21dBu

    Stereo Line Inputs
    Type: 1/4" TRS connectors, unbalanced
    Impedance: > 3.6kΩ
    Max. input level: +22dBu

    Low: 80Hz / ±15dB
    Mid: 2.5kHz / ±15dB
    High: 12kHz / ±15dB

    2-Track Input
    Type: RCA
    Impedance approx.: 3.6kΩ

    Preamp Outputs
    Type: 1/4" TS connectors, unbalanced
    Impedance: approx. 150Ω, unbalanced
    Max. output level: +21dBu

    Type: 1/4" TS connectors, unbalanced
    Impedance: approx. 150Ω, unbalanced
    Max. output level: +21dBu

    Stereo Outputs
    Type: 1/4" TRS connectors, unbalanced
    Impedance: approx. 150Ω, unbalanced
    Max. input level: +21dBu
    Type: RCA
    Impedance: approx. 1kΩ
    Max. input level: +21dBu

    Loudspeaker Outputs
    Type: Professional loxking connector
    Load impedance:
    MAIN L/R: 4 - 8Ω
    BRIDGE: 8 - 16Ω

    Converter: 24-bit Delta-Sigma, 64/128-times oversampling
    Dynamic:s D/A 90dB
    Sampling rate: 46.875kHz
    Delay Time: max. 5 secs
    Signal run time (Line In > Line Out): approx. 1.5ms

    Type: 2-digit, 7-segment LED

    Output Power
    RMS @ 1% THD, both channels driven:
    8Ω per channel: 300W
    4Ω per channel: 600W
    RMS @ 1% THD, bridged mode: 8Ω 1200W
    Peak Power, both channels driven:
    8Ω per channel: 400W
    4Ω per channel: 800W
    Peak Power, bridged mode: 8Ω 1600W

    Power Supply
    Mains voltage
    USA/Canada: 120V~, 60Hz
    Fuse 100: - 120V~ T 10 A H 250V
    Fuse 220: - 240V~ T 6.3 A H 250V

    Power Consumption
    Power consumption: 1050W
    Mains connector: IEC standard receptacle

    Dimensions (WxHxD): 18-3/4" x 4-7/8" x 18-1/8", 476mm x 122mm x 460mm
    Weight: 10.4 kg/22.9 lb.

Behringer EUROPOWER PMP4000 16 Ch Powered Mixer w FX

3 Years

1 year warranty. 3 year warranty if registered within 90 days of purchase.

Get your gear covered!

Now you can get added warranty protection for your new gear. Pro Coverage steps in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program offers you UPGRADED COVERAGE if your product ever fails!

Pro Coverage includes:

  • Accidental damage protection (new gear only)
  • Expedited Repair
  • Free Shipping (for returns or repairs)
  • 100% Coverage for Commercial Use
  • Extended Return Period
  • Extended Price Protection
  • No Lemon Guarantee
  • Free Transfer of Coverage to a new owner
  • Repair Costs Covered for up to 3 years from date of purchase
  • Repairs Can Be Authorized Toll-Free by Phone or the via the web
Product Reviews
(Based on 7 reviews)
Sort reviews:
Viewing Reviews 1 - 3 of 7 |
  • Awesome little mixer, innit?

    As reviewed by West on 4/22/2011

    I purchased this unit along with a PA package because I was tired of being drowned out by my band mates (prior to this purchase, we were using a 4-channel mixer with a guitar amp as speaker-- yeah, it was that bad). For the most part, our gigs use the house system, so my PA is pretty much just-for-practice, but we've used it at house parties too. We run the vox through it, the kick drum and keyboards (on occasion). It's simple to use and has a lot of good options to shape the sound. FX bank is cool, but I wish it had a delay-timer and some other gizmos to bring a more dynamic atmosphere to some songs. I've had it for over two years and haven't had any problems with it whatsoever. It's a great mixer, on the whole. I have absolutely no complaints, and no regrets.

    3 of 3 people found this review helpful.
    Was this review helpful?
  • PMP4000 Review

    As reviewed by Richard Delacalzada on 1/25/2012

    Wanting a more portable and small powered mixer, I decided this one would suit my needs well. Very simple to use, but the manual included (Multilanguage: EM, ES, FR) left a lot out from the english only version I found online. Anyways, the specs are decent: In normal "stereo" mode--300w(400w peak) @ 8ohms per channel/600w(800w peak)@ 4ohms per channel": It's not bad that I can run four 8 ohm speakers (2 per channel = 4ohms) with a pretty good punch. The 12" 2-way pro audio speakers I have handled well with the levels and punchiness from the bass. Very bright. When running a couple of Peavey PR15's (1 @ 8ohms per channel), the bottom end was very nice. In Main/Mono mode running 2 8ohm 12" speakers (in parallel) as monitors in channel A; 2 PR15s (in parallel) in channel B: This simple main/monitor setup sounds real good and projects good power for the monitors. In Bridged mode (8-16 ohms only)(Channel "B" ONLY) 1200w(1600w peak). This is where I felt the power amp limits me. As mentioned above I have been running 8-ohm speakers. So unless I can find good 16-ohm speakers to run a couple in parallel (and utilize the full potential of the amp), I'm limited to using 1 8-ohm cabinet. The english version of the manual has MANY warnings of minimum ohm ratings (and definately not to use channel A when in bridged mode). I believe I won't need that kind of power in a small venue, but it would be cool. In that case, the PMP4000 has plenty of (main/main2/monitor1-2) outputs to allow me to run a couple of power amps I have that will pump 1400w in bridge mode @ 2-ohms to satify my power/speaker combinations. The effects processor (99 presets) should cover your effects needs. Chorus, Reverbs, Echos, etc, etc, etc. Not bad to have handy on stage. There is also a "XPQ" effects switch - basically a "surround" effect that widens the stereo effect. When running MP3s through the mixer, it really gave the sound a fuller effect. Sounds real nice, even outdoors. Another feature is a voice cancellation switch that filters vocal-specific frequencies from the CD/Tape input signal. Bottom line is you can play a song of your liking and remove (most of) the vocals from it, making the PMP4000 a "Karaoke" machine. For the price, portability and features of the PMP4000, (just by itself) I believe it is a very good choice for small venues. Versatile enough for expansion for bigger/outdoor type gigs. This model has plastic sides and a plastic carrying handle, so I question its ruggedness. But there are many ATA style hard cases out there for this model. The quality of this mixer, as compared to other like brands, will hold its' own. Although I have read reliability issues, there are just as many good reviews on its performance, as there are many of like brand names. I am satified that this system will suit my needs for a very long time.

    2 of 2 people found this review helpful.
    Was this review helpful?
  • great mixer

    As reviewed by Andrew Paxton on 7/10/2011

    When i first got this mixer i was amazing if your thinking about buying do it ,it has an increadable amount of power and is very light weight which is a really good plus !

    2 of 2 people found this review helpful.
    Was this review helpful?
Questions about the EUROPOWER PMP4000 16 Ch Powered Mixer w FX (485571)

PO Box 4769
Westlake Village, CA 91359
Order #: (if applicable)  * Denotes Required Field
*First Name:
*Last Name:
Click to add file attachment
File Upload 5mb limit