Accidental damage, normalNormal wear and power surges are no longer an issue with these comprehensive and affordable plans. We even pay to ship your gear for repairs. More details.
Covers much more than the original manufacturer's warranty:
Damage due to unexpected and unintentional spills, drops and impacts
Damage due to normal wear and tear
Damage caused by lightning/power surge
Damage due to dust, internal heat, humidity, heavy usage
No Lemon Policy on merchandise over $200- if it fails for the same reason 3 times, it is replaced on the 4th breakdown
Complete refund in the event of failure or substandard performance on merchandise under $200 (Gift Certificate sent for the full price plus applicable sales tax paid)
Manufacturer's Specs Coverage -- The product does not need to fail to be covered. If the product does not perform as it did the first day you bought it, we will repair or replace it so that it does
Free shipping to and from repair facility
Plans are transferable in the event merchandise is sold
Limit of Liability: The least of the cost of (1) authorized repairs, (2) replacement with a product of similar features, (3) reimbursement for authorized repairs or replacement or (4) the price that you paid for the product.
*Limitations and exclusions apply. See terms and conditions for program details
The rackmountable EP2000 EUROPOWER power amp from Behringer delivers up to 2 x 1,000 watts at 2 ohms, 2 x 750W at 4 ohms, and 2,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4" TRS jacks allow for compatibility with any source. Selectable low-frequency filters let you remove distracting infra-sound frequencies, and its independent DC and thermal overload protection on each channel automatically protects your amp and speakers without stopping the show. The Behringer EUROPOWER's professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems.
Behringer EP2000 EUROPOWER Power Amp
Features:
2 x 1,000 Watts into 2 ohms; 2 x 750 Watts into 4 ohms; 2,000 Watts into 4 ohms (bridge mode) Precise Power, Signal and Clip LEDs to monitor performance XLR and 1/4" TRS input connectors for compatibility with any source Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems Selectable low-frequency filters (30Hz or 50Hz) remove distracting infra-sound frequencies Independent limiters per channel offer reliable protection against overload and distortion High-current toroidal transformer for ultra-high transient response and absolute reliability Ultra-reliable Toshiba/Fairchild power transistors Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show Back-to-front ventilation system including air filter for reliable operation "Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassis High-quality components and exceptionally rugged construction ensure long life Conceived and designed by Behringer Germany
Behringer EP2000 EUROPOWER Power Amp
Specifications:
Output Power: 20Hz–20kHz @ 0.1% THD, both channels driven: 8O per channel-350W 4O per channel-500W 2O per channel-650W
Peak Power, both channels driven: 8O per channel-400W 4O per channel-750W 2O per channel-1000W
Peak Power, bridged mode: 8O-1500W 4O-2000W
Distortion: <0.01%
Frequency Response: At 10dB below rated output Power-20Hz–20kHz, At -3dB points-5Hz–50kHz
Damping Factor: >300 at 8O Noise: -100dB unweighted, 20Hz–20kHz Voltage Gain: 40X (32dB) Input sensitivity: 1.15V (+3.4dBu) VRMS at 8O Input impedance: 10kOhm unbalanced, 20kOhm balanced
Controls: Front: Power switch,gain control (channels 1 and 2) Rear: DIP switches (10x)
Indicators: Power: Green LED Clip: Red LED, 1 per channel Signal: Yellow LED, 1 per channel
Inputs: Balanced XLR and 1/4" TRS connectors Outputs: Touch-proof binding posts and professional speaker connectors
Cooling: Continuously variable-speed fan, back-to-front airflow Amplifier Protection: Full short-circuit, open circuit, thermal, and HF protection Load Protection: Turn on/off muting, AC coupling Circuit Type: Class AB complementary linear output
Power Supply: Mains Voltage/Breaker: 100–120V~, 50/60Hz15A Power Consumption: 1600W
Dimensions: 19" W x 3-1/2" H x 15-4/5" D Weight: 35lb.
1 year warranty. 3 year warranty if registered within 90 days of purchase.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
Accidental damage protection (new gear only)
Expedited Repair
Free Shipping (for returns or repairs)
100% Coverage for Commercial Use
Extended Return Period
Extended Price Protection
No Lemon Guarantee
Free Transfer of Coverage to a new owner
Repair Costs Covered for up to 3 years from date of purchase
Repairs Can Be Authorized Toll-Free by Phone or the via the web
We got the EP2000 for the monitors at our church and this amp is awesome. It has a lot more power than we need but who's complaining. We have a lot of headroom with this very musical amp. It certainly does an awesome job when paired with it's big brother (EP4000) pushing the main speakers.
This amp delivers! Currently using it for small to medium size gigs and mated to my Peavey pr12s, not even on half gain, it rocks the house. I'm am very happy with this amp. It's a bit on the heavy side but makes up in terms of power. The fans are loud as a built computer but overlooked to keep it nice and cool. Behringer knows their stuff.
35
of
37
people found this review helpful.
Was this review helpful?
Thank You for rating this review!
You must be logged in to write a review. Please click here to login.
Browse similar items:
Product Details
Customer reviews
Price
You are currently viewing the Printable Version of this page. Click here to return
to the Regular Version.
866-498-7882
Available in Stores
For your convenience, our online inventory has been expanded to include items in
our retail locations. Some items may be fulfilled from Guitar Center retail stores*.
Items will be inspected to ensure the store has the product you want, in the condition
you expect. If not, a store manager will contact you by phone or email within one
hour.
*Select items are available for in store pick-up only
(Based on 
Based on 
