Dual channel, dual mode.

The BSS Audio FCS-960 is a 30-band graphic equalizer featuring Dual Mode switching between Normal and Fine filter width settings on each channel.

The FCS-960 provides 2 channels in 3U of rack space. Constant Q-filters with filter-bypass center taps are controlled by high grade, 45mm faders with molded polymer fader knobs that eliminate visual parallax error even under low light conditions.

Also included are sweepable/switchable Hi-pass filter, Gain control and electronic balanced inputs and outputs.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

BSS Audio FCS-960 Graphic Equalizer Features:

Long 45mm fader travel for precise adjustment and control
Center detented fader with electrical center tap for true 0dB setting
Advanced constant Q filter topography for improved accuracy at all fader settings and excellent sonic transparency. Selectable normal or fine filter response
Continuously variable high pass filter, with by-pass switch
Gain control fro system loudness normalization
Peak clip LED to give advance warning of signal overload
Channel bypass selection and power fail bypass by relays
Electronically balanced inputs and outputs
Proprietary design fader knob provides positive feel with ample finger room, virtually eliminates visual parallax errors even under low ambient light conditions

BSS Audio FCS-960 Graphic Equalizer Specifications:

Input Section
Impedance: 10k Ohm, Electronically Balanced:
Max. Input Level: +20dBu
Connector: XLR331 or equivalent

Output Section
Output: Electronically Balanced & floating
Max. Output Level: +20dBu into 600 Ohms
Connector: XLR332 or equivalent

System Performance
Frequency Response: +/0.25dB 20Hz to 20kHz
Distortion (THD): <0.005% 20Hz to 20kHz @+4dBu
Output Noise (flat): <90dBu, 22Hz to 22kHz, unweighted
Channel Separation: Better than 80dB from 20Hz to 20kHz
Gain Control Range: +/10dB
Peak Indicator: +18dBu
Bypass:Passive failsafe bypass relay

Filters
Type: MFB Constant Q
Frequencies Per Channel: 30 off, on 1/3 octave ISO centres, 25Hz to 20kHz
Boost/Cut Range: Nominal +/10dB *
Mode: Selectable normal or fine response
High Pass Filter: 18dB/octave Butterworth, 20Hz to 250Hz

General
Power Requirements: AC 30VA 50/60Hz, selectable 90/120v or 190/250v. IEC AC power cord.
Dimensions: 3U 19 " x 5.25" x 8.9" (482mmx132mmx227mm)
Weight: 11lbs gross shipping (6kg)