Much more than an ordinary compressor/limiter!

The DPR-402 is a 2-channel compressor/limiter, high frequency de-esser and wide band de-esser with peak limiting, adjustable speed, dynamics program manipulation, and full LED metering for both input and output. Integrated side-chain and gain reduction metering allow for continuous dynamic activity monitoring. Auto mode provides program dependent attack and release control.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

BSS Audio DPR-402 2-Channel Compressor Peak Limiter De-esser Specifications:

General
Input Impedance: 10k ohm balanced or unbalanced.
Input Headroom: >+20dBv.
Input CMMR: Better than -50dB 30Hz-20kHz. Typically -65dB at 1kHz.
Output level: >+20dBv into 600 ohms or greater.
Output Impedance: <1 ohm unbalanced.
Output Gain: ±20dB continuously variable.
Frequency Response: ±1dB 25Hz to 20kHz. Ultrasonic filter -3dB at 30kHz.
Noise: Equivalent input noise <-86dBv 22Hz to 22kHz , <-82dBv CCIR weighted.
Distortion: Unity Gain +10dBm output, below threshold. THD: <0.03% 20Hz-20kHz.Typically 0.002% at 1kHz. IMD: <0.01% SMPTE. Typically 0.003%.10dB compression. Threshold 0dB. 1kHz, 5sec rel. Time, 2nd Harmonic <0.15%, 3rd Harmonic <0.05%. IMD (SMPTE) <0.25%
Cross Talk: Better than -85dB 20Hz to 20kHz, any settings.
De-esser
Threshold Range: -30dBv to 20dBv continually variable.
Ratio: Infinite, at and above twice the set frequency.
Frequency Range: 700Hz to 20kHz continuously variable (see note 3).
Peak Limiter
Threshold Range: +4dBv to +20dBv continuously variable.
Ratio: >20:1.
Attack Time: 150 microseconds, fast setting. 750 microseconds, slow setting.
Release Time: 100 milliseconds, fast setting. 500 milliseconds, slow setting.