The amazing sound enhancement of the 482i Sonic Maximizer in a pedal.
The BBE Sonic Stomp Pedal will make guitarists and bassists rejoice! More fullness, more presence, more clarity, and more control right at your feet. Hardwire bypass, nonslip rubber bottom, easy-access 9V battery compartment, and included external power supply.
The BBE Process--"What it Is"
Loudspeakers have difficulty working with the electronic signals supplied by an amplifier. These difficulties cause such major phase and amplitude distortion that the sound reproduced by the speaker differs significantly from the sound produced by the original source.
In the past, these problems proved unsolvable and were thus relegated to a position of secondary importance in audio system design. However, phase and amplitude integrity is essential to accurate sound reproduction. Research shows that the information which the listener translates into the recognizable characteristics of a live performance are intimately tied into complex time and amplitude relationships between the fundamental and harmonic components of a given musical note or sound. These relationships define a sound's "sound".
When these complex relationships pass through a speaker, the proper order is lost. The higher frequencies are delayed. A lower frequency may reach the listener's ear first or perhaps simultaneously with that of a higher frequency. In some cases, the fundamental components may be so time-shifted that they reach the listener's ear ahead of some or all of the harmonic components.
This change in the phase and amplitude relationship on the harmonic and fundamental frequencies is technically called "envelope distortion." The listener perceives this loss of sound integrity in the reproduced sound as "muddy" and "smeared." In the extreme, it can become difficult to tell the difference between musical instruments, for example, an oboe and a clarinet.
BBE Sound, Inc. conducted extensive studies of numerous speaker systems over a ten year period. With this knowledge, it became possible to identify the characteristics of an ideal speaker and to distill the corrections necessary to return the fundamental and harmonic frequency structures to their correct order. While there are differences among various speaker designs in the magnitude of their correction, the overall pattern of correction needed is remarkably consistent.
The BBE Process is so unique that 42 patents have been awarded by the U.S. Patent Office.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
BBE Sonic Stomp Sonic Maximizer Guitar Effects Pedal Features:
BBE Sonic Stomp Sonic Maximizer Guitar Effects Pedal Specifications:
- Frequency Response: Program Dependent
BBE: Lo Contour +12dB @ 50Hz
Process +12dB @ 10kHz
Signal to Noise Ratio: BBE on Max 94dB
BBE on Min 104dB
THD: 0.02% at 1kHz
Noise: BBE on Max -87dBu
BBE on Min -97dBu
Max Signal Level +7dBu
Input Impedance: 1MEG Ohms
Output Impedance: 1K Ohm
* 0dBu = 0.775Vrms
Hardware Bypass: YES
Power Requirements:
DC inlet: +9VDC min. 200ma
Battery Life: 15 hours
BBE Sonic Stomp Sonic Maximizer Guitar Effects Pedal
IT IS THE SOLE RESPONSIBILITY OF THE END USER TO PROVIDE THE BILL OF SALE OR OTHER MEANS OF PROOF OF PURCHASE TO VALIDATE THE WARRANTY IF WARRANTY SERVICE IS REQUIRED.
BBE Sound, Inc. products are warranted against defects in material and workmanship for a period of five (5) years from date of purchase from BBE Sound, Inc. or an authorized dealer.
During this period, BBE Sound, Inc. will repair units free of charge providing that they are shipped prepaid to:
BBE Sound, Inc.
5382 Production Drive
Huntington Beach, California 92649
BBE Sound, Inc. will pay return UPS shipping charges within USA. All charges related to non-US shipping, including customs clearance, will be billed. The warranty will be honored for the longer of either 90 days from the date of any service or the remainder of the original 5 year factory warranty.
If a BBE Sound, Inc. product is purchased through an authorized BBE distributor outside the US, contact the distributor to arrange warranty repair.
This warranty will be considered null and void by BBE Sound, Inc. if any of the following is found:
1. The equipment has been physically damaged.
2. The equipment shows signs of abuse
3. The equipment has been electrically damaged by improper connection or attempted repair by the end user or third party.
4. The equipment has been modified without authorization.
5. The bill of sale indicates that the purchase date of the equipment is not within the warranty period.
A copy of the original sales receipt must be provided for service under this warranty.
All non-warranty repairs are warranted for a period of 90 days from the date of service.
BBE Sound, Inc. is NOT LIABLE FOR CONSEQUENTIAL DAMAGES. Should the unit fail to operate for any reason, our sole obligation is to repair the unit as described above.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
(Based on 
Based on 
