BAE

collapse expand iconDescription

BAE Audio is known for manufacturing high-end microphone preamps and EQs that are faithful to original vintage designs from the 70s and earlier. BAE prides itself on using high-end transformers for their products, and everything is kept as close to the vintage philosophy as possible. Not only does BAE choose the highest quality components, they also insist that everything is hand-wired/soldered using discreet electronics and not economized on a circuit board.

The BAE 1023 is completely hand wired using Carnhill (St. Ives) transformers. It has the exact same mic/line preamp as the 1073, but with significantly more frequencies in the mid and high sections. Aside from simply offering more frequency settings to play with, these expanded EQ sections also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways.
BAE 1023 Rackmount Without Power Supply

collapse expand iconFeatures

  • Hand wired using Carnhill (St. Ives) transformers
  • High Frequency: +/-16dB shelving with selectable frequencies
  • Low Frequency: +/-16dB shelving with selectable frequencies
  • Mid Range: +/-12dB or +/-18dB peaking with switchable selectable centre
  • High Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz & 360Hz
  • EQ Button: Switches the equaliser on or off
  • Phase Button: 180

collapse expand iconSpecs

Frequency Response
  • 10Hz to -3dB at 55kHz
3 Band EQ
  • HF: +/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz
  • LF: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
  • MF: +/-18dB +/-12dB or +/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz
High Pass Filter
  • 45Hz, 70Hz, 160Hz & 360Hz
Mic Input Impedance
  • ‰ˆ1200/300 ohms
Line Input Impedance
  • 10k ohms
DI Input Impedance
  • ‰ˆ150k ohms
Output Impedance
  • 65 ohms
Common Mode Rejection Ratio
  • 100dB min @ 60Hz
Maximum Output Level
  • +27.4 dBu @ 600„¦
Power Requirements
  • 115/230 VAC, 28W
Gain dB
  • 0 to 80 dB
Equivalent Input Noise
  • -110 dBu; Unweighted 300kHz Bandwidth

Featured Articles